Label-Free Impedance Biosensors: Opportunities and Challenges

Impedance biosensors are a class of electrical biosensors that show promise for point-of-care and other applications due to low cost, ease of miniaturization, and label-free operation. Unlabeled DNA and protein targets can be detected by monitoring changes in surface impedance when a target molecule binds to an immobilized probe. The affinity capture step leads to challenges shared by all label-free affinity biosensors; these challenges are discussed along with others unique to impedance readout. Various possible mechanisms for impedance change upon target binding are discussed. We critically summarize accomplishments of past label-free impedance biosensors and identify areas for future research.     

Temporal Response of SERS to the Potential for 4-Cyanopyridine Adsorbed on Ag Electrode

Time-resolved surface-enhanced Raman scattering (SERS) was applied to study the response of Raman bands from 4-cyanopyridine (PyCN) adsorbed on a Ag electrode to variation of the potential; the temporal resolution was 0.1 s. The response of the SERS signals of PyCN was instantaneous to the oxidation potential of Ag electrode. However, delay of the SERS signals was observed while AgCl was reducing. The decay and growth of the SERS bands look place within 1 s in the cases of desorption and adsorption of PyCN on the electrode. It took much longer for PyCN to alter from one adsorption geometry to another on the electrode.     

硅胶担载四核羰基钴催化剂的EXAFS和IR研究

本文以透射法EXAFS和IR等手段研究了四核羰基钴金属簇Co_4(CO)_(10)(PPh)_2担载在SiO_2上以后及用于烯烃醛化反应前后的变化,确定了相应的结构参数并探讨了催化活性与结构的关系。     

Entropy evaluation using the kinetic method: is it feasible?

The kinetic method is one of the most widely used experimental techniques for the measurement of thermochemical parameters by mass spectrometry. Recently it has been realized that it can also be used to determine reaction entropies, but the validity of this approach has not been established. This Perspective evaluates kinetic method plots in cases where there is a significant entropy difference between the competing fragmentation channels (i.e. between sample and reference compounds in the dissociating cluster ion). The concept underlying this study is to calculate mass spectra theoretically, based on known thermochemical parameters and as a function of experimental conditions. This can be done accurately using the RRKM-based MassKinetics software. The resulting mass spectra are then interpreted by the kinetic method, yielding DeltaH and DeltaS values. These values are, in turn, compared with the true values used to generate the calculated mass spectra. The results show that the reaction entropy difference between sample and reference has a very large influence on kinetic method plots. This should always be considered when studying energy-dependent mass spectra (using metastable ions or low- or high-energy collision-induced dissociation (CID)), even if only DeltaH is to be determined. Kinetic method plots are not strictly linear and this becomes a serious issue in the case of small molecules showing a large entropy effect. In such cases, results obtained at a low degree of excitation are more accurate. Energy and entropy effects can be evaluated in a relatively straightforward manner: first, the apparent Gibbs energy (DeltaG(app)) and effective temperature (T(eff)) are determined from kinetic method plots (intercept and slope, respectively), obtained from experiments using various degrees of excitation. Second, the resulting DeltaG(app) is plotted against T(eff), the slope yielding DeltaS while the intercept (extrapolation to zero temperature) yields DeltaH. This data evaluation yields more accurate results than alternative methods used in the literature. The resulting DeltaH values are fairly accurate, with errors, in most cases, <4 kJ mol(-1). On the other hand, DeltaS is systematically underestimated by 20-40%. Empirically scaling DeltaS values determined by the kinetic method by 1.35 results in a DeltaS value within 20% (or 10 J mol(-1) K(-1)) of the theoretical value.     

BRCA1 mutation screening using restriction endonuclease fingerprinting-single-strand conformation polymorphism in an automated capillary electrophoresis system

Efficient mutation scanning techniques are needed for the rapid detection of novel disease-associated mutations and rare-sequence variants of putative importance. The large size of the breast cancer 1 gene (BRCA1) and the many mutations found throughout its entire coding sequence make screening for mutations in this gene particularly challenging. We have developed a method for screening exon 11 of the BRCA1 gene based on restriction enzyme digestion of fluorescence-labeled polymerase chain reaction (PCR) products followed by single-strand conformation polymorphism (SSCP) using an automated capillary electrophoresis system, denoted capillary restriction endonuclease fingerprinting (REF)-SSCP electrophoresis. Using this strategy on a control set of samples, we were able to detect 17 of 18 known sequence alterations. The method was then applied to screen 73 Norwegian females with family histories of breast and/or ovarian cancer. A total of 172 sequence alterations were detected, including substitutions, insertions, and deletions. One novel substitution of unknown function was identified. Sequencing of all samples negative in the capillary REF-SSCP system gave no additional mutations confirming the high sensitivity of the described methodology. Capillary REF-SSCP electrophoresis appeared as a technically convenient technique, requiring amplification of fewer PCR fragments than traditional SSCP. The novel strategy allows high-throughput mutation scanning without radioactive labeling and polyacrylamide gel electrophoresis (PAGE).     

Measurement of the sign and the magnitude of heteronuclear coupling constants from spin-state-edited J-cross-polarization NMR experiments

New spin-state-selective (S3) NMR pulse sequences exclusively applying cross-polarization schemes to achieve optimum homonuclear and heteronuclear 1H-X coherence transfer are reported for the simple and accurate measurement of the magnitude and sign of heteronuclear coupling constants for samples at natural abundance. The proposed spin-edited HCP-TOCSY experiments are based on clean heteronuclear S3 excitation, generated by simultaneous co-addition of two independent in-phase and anti-phase components created during the mixing heteronuclear J-cross-polarization (HCP) step, which is finally transferred to other protons by a conventional homonuclear TOCSY mechanism. Selective 1D and non-selective 2D approaches for the easy determination of long-range proton-carbon and proton-nitrogen coupling constants on any protonated and non-protonated heteronuclei are presented and discussed for several organic molecules.     

The chemistry of fluorine containing phosphaalkenes, arsaalkenes and selenocarbonyls

This review covers our extensive research activities in the area of fluorine containing phospha- and arsaalkenes as well as selenocarbonyls, which differ considerably in their properties and reactivities from their alkyl and aryl counterparts and thus contribute in a gratifying manner to the still growing field of unsaturated element-carbon compounds of 3rd and 4th row main group elements E. Of particular interest is the influence of the fluorine substituents and other small groups (OR, NR₂) with either inductive and/or mesomeric effects on the polarity and reactivity of the EC bond. Addition reactions of proton acidic and hydridic polar HX reactants as well as [2+2], [3+2] and [4+2] cycloadditions have been thoroughly studied. The results obtained allow a classification of the EC systems within five different types, A to E, and prove a change from “normal” to “inverse” heteroalkenes in this sequence. The ligand properties of some derivatives have also been investigated in some detail.     

Development of a universal Raman detector for microchromatography

Summary A detector for microchromatography in which Raman spectroscopy is used to identify the eluted species has been developed. The detector is designed to be applicable to a wide range of compounds without requiring the presence of a chromophore. Its use is illustrated in the analysis of nitro compounds on a 250 μm i.d. column. Raman spectra of each of the compounds could be identified as they passed the detector. The advatages of the use of fully deuterated solvents are demonstrated by the analysis of nitrobenzenes in methanol/water mobile phases. The detection limit for nitrobenzene using the Raman line at 1342 cm⁻¹ was 75ng.     

Synthesis and conformational analysis of novel N(OCH3)-linked disaccharide analogues

N(OMe)-linked disaccharide analogues, isosteric to the corresponding natural disaccharides, have been synthesized by chemoselective assembly of unprotected natural monosaccharides with methyl 6-deoxy-6-methoxyamino-alpha-D-glucopyranoside in an aqueous environment. The coupling reactions were found to be chemo- and stereoselective affording beta-(1-->6) disaccharide mimics when using Glc and GlcNAc; in the case of Gal, the beta-anomer was prevalent (beta:alpha=7:1). An iterative method for the synthesis of linear N(OMe) oligosaccharide analogues was demonstrated, based on the use of an unprotected monosaccharide building block in which an oxime functionality at C-6 is converted during the synthesis into the corresponding methoxyamino group. The conformational analysis of these compounds was carried out by using NMR spectroscopy, ab initio, molecular mechanics, and molecular dynamics methods. Optimized geometries and energies of fourteen conformers for each compound have been calculated at the B3LYP/6-31G* level. Predicted conformational equilibria were compared with the results based on NMR experiments and good agreement was found. It appears that N(OMe)-linked disaccharide analogues exhibit a slightly different conformational behavior to their parent natural disaccharides.