火焰原子吸收法测定竹荪中的微量元素

使用灰化法处理样品,火焰原子吸收光谱法测定了竹荪中的钾、钙、钠、镁、铁、锰、铜、锌的含量。结果显示,竹荪中含有丰富的铁、锰、铜、锌4种人体必需微量元素。加标回收率为93.2%~103.2%,该法测定快速、简单,结果满意。     

流动注射-火焰原子吸收法测定天然水体中的铬(Ⅲ)和铬(Ⅵ)

采用流动注射—火焰原子吸收法则定天然水体中的微量铬(Ⅲ)和铬(Ⅵ)。用螯合树脂在线富集浓缩样品中的铬(Ⅲ)，结合流动注射技术，将洗脱液直接导入火焰原子吸收分光光度仪中进行测定。加入盐酸羟胺使水体中的铬(Ⅵ)转化成铬(Ⅲ)，然后间接测定。对在线富集测试条件、干扰物质的影响等进行了探讨。该方法检出限为0．84μg/mL，加标回收率为94．4％～103％。     

A cellulose-based carboxyl cotton chelator having citric acid as an anchored ligand: preparation and application as solid phase extractant for copper determination by flame atomic absorption spectrometry

Citric acid was thermochemically esterified onto defatted cotton fibre to produce a carboxyl cotton chelator (CCC), which had been used for extraction of copper prior to its determination by flame atomic absorption spectrometry. The extraction of copper has been studied under both batch and column methods. Quantitative extraction of copper was achieved in the pH range 4–7. The time needed to extract each sample was less than 30 min by the batch method. The copper extraction capacity of CCC was found to be 22.7 mg g⁻¹ at optimal pH value. The elution was quantitative with 1 mol L⁻¹ hydrochloric acid. The feasible flow rate of copper-containing solution for quantitative extraction onto the column packed with CCC was 0.5–4.0 mL min⁻¹, whereas for elution it was less than 1.5 mL min⁻¹. A 100-fold extraction factor could be achieved under the optimal column conditions. The tolerance limits for common metal ions on the extraction of copper and the time of column reuse were investigated. The proposed method has been successfully applied for extraction and determination of copper in industrial wastewater and natural water samples.     

Direct determination of Cu and Zn in fruit juices and bovine milk by thermospray flame furnace atomic absorption spectrometry

In the present work, thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS) was employed for Cu and Zn determination in bovine milk and fruit juice samples without any pretreatment. TS-FF-AAS system was optimized and a sample volume of 300 μl was injected into the carrier stream (0.014 mol l⁻¹ HNO₃ at a flow rate of 0.4 ml min⁻¹), and it was introduced into a hot Ni tube. The detection limits obtained for Cu and Zn in aqueous solution were 2.2 and 0.91 μg l⁻¹, respectively, and 3.2 μg l⁻¹ for Cu in a medium containing water-soluble tertiary amines. The relative standard deviations varied from 2.7 to 4.2% (n=12). Sample preparation was carried out by simple dilution in water or in water-soluble tertiary amines medium. Accuracy was checked by performing addition-recovery experiments as well as by using reference materials (whole milk powder, non-fat milk powder, and infant formula). Recoveries varied from 97.7 to 105.3% for Cu and Zn. All results obtained for reference materials were in agreement with certified values at a 95% confidence level.     

Analysis of yttrium aluminium borate crystals by solution-based methods: inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry

Comparative analysis of yttrium aluminium borate (YAB) /YAl₃(BO₃)₄/ optical single crystals was performed by flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods for Cr, Dy, Er, Yb, Y, Al, B and Mo. The dopant element, Ce, could be determined only by the ICP-AES method at the required concentration level. The powdered crystal samples were fused with lithium metaborate (LiBO₂) at 950 °C in a platinum crucible and then dissolved in 6 mol l⁻¹ HCl. Although this fusion-dissolution procedure proved to be simple and effective, the quantitative determination of B—as the matrix element in samples—was handicapped by the B content of the fusing reagent. For the FAAS method, with the use of nitrous oxide–acetylene flame, cesium chloride ionization buffer and lanthanum chloride releasing agent [0.1+0.2% (m/v), respectively] were applied. These agents enhanced the atomic absorption signals of Cr, Dy, Er, Mo, Yb and Y, whereas no change of sensitivity was resulted in for Al and B. A fairly good agreement was found between the results of the two alternative spectrochemical methods. The predicted stoichiometry of the crystals was also well approximated indicating the reliability of the crystal growth technology applied.     

脉冲进样火焰原子吸收光谱法测定血清、脑和骨中的铁

采用脉冲微量进样火焰原子吸收光谱法测定血清、脑组织及骨中铁含量。血清样品经稀释后直接测定，脑组织及骨样品采用HNO3－HClO4湿法消化。实验探讨了进样体积、提升速度等影响因素，方法的相对标准偏差为1．1％－3．3％，平均回收率为99．0％－100．1％。     

原子吸收法测定杨桃中的微量元素

采用微波消解,火焰原子吸收分光光度计对两个甜杨桃品种进行了微量元素的测定。试验结果表明,杨桃中钙、镁、锰、锌、铁等微量元素含量丰富,比较发现同一元素在不同品种的杨桃中无显著的区别。方法简便、快速、准确。     

Membrane Filtration of Iron(III), Copper(II) and Lead(II) Ions as 1‐(2‐Pyridylazo) 2‐Naphtol (PAN) for Their Preconcentration and Atomic Absorption Determinations

A membrane filtration procedure for the preconcentration and atomic absorption spectrometric determination of Pb(II), Co(II) and Fe(III) ions in natural water samples has been established. Cellulose nitrate membrane filters (0.45 μm and 47 mm diameter) were used in all experiments. The procedure is based on chelate formation of the analyte metals with 1‐(2‐pyridylazo) 2‐naphtol (PAN) and on retention of the chelates on cellulose nitrate membrane filter. The cellulose nitrate membrane and analyte ions were completely dissolved by 500 μL of nitric acid at 85 °C on a hood and then metal determinations were performed by flame atomic absorption spectrometry. The method was applied to natural water samples for the determination of analyte ions with satisfactory results, e.g., recoveries > 95%, RSD's < 10%.     

Synthesis of amidinothioureido-silica gel and its application to flame atomic absorption spectrometric determination of silver, gold and palladium with on-line preconcentration and separation

A simple and highly selective flow injection (FI) on-line preconcentration and separation flame atomic absorption spectrometric (FAAS) method was developed for the determinations of trace amounts of silver, gold and palladium. The selective preconcentration of the noble metals was achieved in a wide range of sample acidity (0.1-6 M HNO₃ or HCl) on a microcolumn packed with amidinothioureido-silica gel (ATuSG). The analytes retained on the column were effectively eluted with 5.0% thiourea solution. The analytical procedure was optimized for sample acidity, elution, interferences, flow rate of sampling and eluting, and concentration of sample. Common co-existing cations and anions did not interfere with the preconcentration and determination of the three metals. At a sample loading flow rate of 4.5 ml min⁻¹ with 60 s preconcentration, detection limits (3σ) of 1.1 ng ml⁻¹ Ag, 13 ng ml⁻¹ Au and 17 ng ml⁻¹ Pd were obtained. The precisions (R.S.D., n=11) were 1.2% for Ag, 1.2% for Au and 1.7% for Pd, respectively. The detection limits can be further improved by increasing sample volume. The analytical results obtained by the proposed method for a number of standard reference materials were in good agreement with the certified values.     

Speciation of Cr(III) and Cr(VI) in waters using immobilized moss and determination by ICP-MS and FAAS

The possibility of using moss (Funaria hygrometrica), immobilized in a polysilicate matrix as substrate for speciation of Cr(III) and Cr(VI) in various water samples has been investigated. Experiments were performed to optimize conditions such as pH, amount of sorbent and flow rate, to achieve the quantitative separation of Cr(III) and Cr(VI). During all the steps of the separation process, Cr(III) was selectively sorbed on the column of immobilized moss in the pH range of 4-8 while, Cr(VI) was found to remain in solution. The retained Cr(III) was subsequently eluted with 10 ml of 2 mol l⁻¹ HNO₃. A pre-concentration factor of about 20 was achieved for Cr(III) when, 200 ml of water was passed. The immobilized moss was packed in a home made mini-column and incorporated in flow injection system for obtaining calibration plots for both Cr(III) and Cr(VI) at low ppb levels that were compared with the plots obtained without column. After separation, the chromium (Cr) species were determined by inductively coupled plasma mass spectrometry (ICP-MS) and flame atomic absorption spectrometry (FAAS). The sorption capacity of the immobilized moss was found to be ∼11.5 mg g⁻¹ for Cr(III). The effect of various interfering ions has also been studied. The proposed method was applied successfully for the determination of Cr(III) and Cr(VI) in spiked and real wastewater samples and recoveries were found to be >95%.