火焰原子吸收光谱法测定生物样品中锌、铜和锰

生物样品经消化处理后,用火焰原子吸收光谱法测定样品中锌、铜和锰的含量,平均加标回收率为97.3%-102.4%,相对标准偏差(RSD)为0.65 %-1.40%.锌、铜和锰在给定范围内呈现良好的线性关系,相关系数分别为0.9994、0.9994和0.9983,方法简便,快速,结果可靠.     

男性型秃发患者发中K,Na,Ca,Mg元素含量分析

采用火焰原子吸收法对３０例男性型秃发患者及３８例毛发健康男性对照者发中宏量元素Ｋ、Ｎａ、Ｃａ、Ｍｇ的含量进行了测定。结果表明，男性型秃发患者发Ｋ含量明显高于对照组，具有统计学上的显著差异（Ｐ〈０．０１）。发Ｎａ、Ｃａ、Ｍｇ含量在两组间未见显著差异（Ｐ〉０．０５）。本文提示，体内某些宏量元素变化对男性型秃发可能产生一定影响。     

原子吸收光谱法测定裂解汽油中铅

报道了用火焰原子吸收光谱法测定裂解汽油中铅的方法。用碘 二甲苯溶液对汽油进行氧化处理,用稀硝酸进行萃取,萃取后浓缩液用原子吸收光谱法进行测定。铅含量在0～7.0μg·ml-1范围内符合比耳定律。对汽油样品进行分析时,相对标准偏差小于3.95%,对样品进行加标回收试验,回收率为97.7%～101.7%,方法的精密度和准确度良好。     

火焰原子吸收光谱法测定天然水中微量铁的形态

研究了用抗坏血酸为还原剂,使二价铁离子与邻菲啰啉(phen)形成螯合物,用硝基苯萃取,火焰原子吸收光谱法测定有机相中的铁。方法检出限为1.7ng·ml~(-1),回收率为98.0％～109.6％,线性范围为0～10.0μg·ml~(-1)(原水相),线性相关系数为0.9994。测定结果与ICP-AES法结果对照相对误差小于9.46％。     

火焰原子吸收法快速分析硫酸中铅镉铜锌

文中直接取硫酸样品3ml于装有约10ml水的25ml比色管中,加入碘化钾溶液2ml,用水稀至刻度。加入甲基异丁酮5ml,萃取lmin,分层后,在有机相中测定铅、镉、铜含量;在水相中测定锌含量。方法的加标回收率为98.9％～103％,精密度1.8％～4.3％,标准曲线法和标准加入法结果相近,倍比试验结果亦相吻合,方法快速简便、准确,适合于工业中的快速分析。     

在线标准加入火焰原子吸收光谱法测定钮扣电池中铅和镉

应用火焰原子吸收光谱(FAAS)法测定了钮扣电池中铅和镉的含量,对测定条件作了较详细的研究。用在线双毛细管标准加入法消除了基体的干扰。按所述方法测定电池样品中铅和镉,测定结果的RSD依次为3.58%和5.87%,铅和镉的浓度水平分别为5.4×10-3%和2.3×10-4%(质量分数),回收率结果为93.0%~100.1%(铅)和95.0%~101.0%(镉)。     

Cloud Point Extraction Preconcentration of Trace Cadmium as 1-Phenyl-3-methyl-4-benzoyl-5-pyrazolone Complex and Determination by Flame Atomic Absorption Spectrometry

A new method for the determination of trace cadmium in water samples by flame atomic absorption spectrometry (FAAS) after cloud point extraction (CPE) is proposed. The method is based on the complexation of Cd with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) in the presence of non-ionic micelles of Triton X-100. The effect of experimental conditions such as pH, concentration of chelating agent and surfactant, equilibration temperature and time on cloud point extraction was studied. Under the optimum conditions, the detection limits are 0.64 ng mL^±1 with relative standard deviations (RSDs) of 2.1% (n = 10). The proposed method was applied to the determination of trace cadmium in water samples with satisfactory results.     

Determination of selenium, zinc and cadmium in antidandruff shampoos by atomic spectrometry after microwave assisted sample digestion

Microwave assisted pre-treatments for atomic spectrometric determination (inductive coupled plasma-optical emission spectrometry, ICP-OES or flame atomic absorption spectrometry, FAAS) of metallic elements, usually present in antidandruff shampoos, are proposed. They are based on the digestion of the sample with HNO₃ into a closed reactor, which is irradiated at 800 W for a few minutes. Selenium was determined by ICP-OES. The limit of detection was 0.11 mg l⁻¹; the relative standard deviation (R.S.D.) for the selenium content in the samples was in the 0.6–3.6% range. The results obtained were in agreement with the label contents and the recovery of the proposed method was in the 100–106% range. Zinc and cadmium were determined by FAAS. The limit of detection for zinc determination was 0.078 mg l⁻¹; the R.S.D. for zinc contents was in the 0.8–8.6% range. A limit of detection of 0.09 mg l⁻¹ was obtained for cadmium determination; the R.S.D. for cadmium contents was in the 0.7–2.7% range. The determinations were performed after two different sample mineralization pre-treatments — dry ashing (in an electric furnace) and wet mineralization (in a microwave oven). Both methodologies provided comparable results for zinc and cadmium determination in shampoos. The proposed microwave assisted digestion procedures allow a precise and accurate determination of selenium, zinc and cadmium in commercial antidandruff shampoos, and the sample pre-treatment is less time-consuming than the classic methods.     

Rapid dissolution procedure for base-metals-bearing complex materials for quality control assessment

A less labour-intensive method, involving a mixture of 1.0 g MnO₂ + 20 mL HCl (11), is proposed for decomposing seven ores and six metallurgical products for accurate and precise estimation of copper, lead, zinc, cobalt and nickel for quality control assessment. Twentyone international reference materials were also analysed. Results of regression analyses are presented and intermethod comparison studies reveal that the probability of results being different compared with a reference method was less than 1%. Sample decomposition is straightforward and the method has been found to be very simple, rapid and easily adaptable, as it involves no separation of the analyte from the matrix elements.     

用原子捕获技术提高火焰原子吸收光谱法的灵敏度

采用简易的石英原子捕获器，使Ｃｕ，Ａｇ，Ａｕ，Ｚｎ，Ｃｄ，Ｐｂ，Ｓｂ，Ｂｉ等易挥发元素在空气－乙炔火焰原子吸收光谱法中的灵敏度提高了３～５倍，并有较好的精密度，相对标准偏差在１％左右，方法中用此技术测定了标准物质中Ｐｂ、Ｃｄ的含量，获得了满意的结果，它较之石墨炉原子吸收光地具有快速，简便的特点，具有较大的实用价值。