Monitoring of Airborne Organic Vapors Using Ion Mobility Spectrometry

Abstract

Automated, continuous monitoring of organic vapors in air under three field designs for plume drift was demonstrated using a hand-held ion mobility spectrometer (IMS) in characterizing IMS behavior as a point sensor. In one field study, the IMS was placed 50cm from a 9m² grass plot contaminated with methylsalicylate and response to airborne vapors was recorded during a 13hr period of atmospheric turbulence to illustrate susceptibility of point sensors to wind direction. A similar study under near-quiescent atmospheric conditions was made using dimethylsulfoxide. In a third study, the plume from a point source of dipropyleneglycolmonomethylether was interrogated over a 25m × 12m grid downwind with windspeeds of 6–18km h^?. Laboratory studies were used to measure instrumental response times and influences from potentially interfering atmospheric organic pollutants.     

Determination of trans,trans‐muconic acid in workers' urine through ultra‐performance liquid chromatography coupled to tandem mass spectrometry

A novel method for the biological monitoring of benzene‐exposed workers has been developed through ultra‐performance liquid chromatography coupled to tandem mass spectrometry. The method uses trans,trans‐muconic acid in urine as the benzene‐exposure biomarker. The method was developed using a triple quadrupole mass spectrometer with enough sensitivity to facilitate diluting and injecting the urine samples directly, rather than performing a solid‐phase extraction procedure as is common in the available protocols. Moreover, compared with a conventional high‐pressure liquid chromatography system, the separation power provided by the ultra‐performance liquid chromatography system allows a 10‐fold reduction in run time. The method was adjusted to a dynamic range of between 198.9 and 4916.7 µg/L to cover the biological exposure index of trans,trans‐muconic acid in urine. Also, the method demonstrated intra‐day and inter‐day precision at 98%, and accuracy within an acceptable range of 101 ± 8%. The method has been used to quantify various types of urine samples, such as workers' urine and inter‐laboratory proficiency tests. Depending on the sample, the quantified levels ranged from less than the limit of quantitation to 3836.7 µg/L. No levels exceeding the calibration range were detected in the urine of workers, and the reported concentrations in urine for the proficiency tests were, as expected, based on known values. Moreover, the new method using sample dilution and faster chromatographic run was more effective, facilitating fast communication of results, as needed, to decision‐makers. Copyright © 2012 John Wiley & Sons, Ltd.     

Fast analysis of triterpenoids in Ganoderma lucidum spores by ultra‐performance liquid chromatography coupled with triple quadrupole mass spectrometry

A rapid and reliable method was established for simultaneous determination of main triterpenoids in Ganoderma lucidum spores using ultra‐high‐performance liquid chromatography coupled with triple quadrupole mass spectrometry (UPLC‐TQ‐MS). The established method was validated in terms of linearity, sensitivity, precision, accuracy and stability, and was successfully applied to determine the contents of 10 main triterpenoids in different batches of G. lucidum spores. The analysis results showed that moderate levels of triterpenoids were found in G. lucidum spores. In addition, a MS full scan with a daughter ion scan experiment was performed to identify the potential derivatives of triterpenoids present in G. lucidum spores. As a result, a total of 22 triterpenoids from different G. lucidum spores were unequivocally or tentatively identified via comparisons with authentic standards and literatures. This method provides both qualitative and quantitative results without the need for repetitive UPLC‐MS analyses, thereby increasing efficiency and productivity, making it suitable for high‐throughput applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Identification and quantification of the antipsychotics risperidone,aripiprazole, pipamperone and their major metabolites in plasma using ultra‐high performance liquid chromatography–mass spectrometry

The antipsychotics risperidone, aripiprazole and pipamperone are frequently prescribed for the treatment in children with autism. The aim of this study was to validate an ultra‐high performance liquid chromatography–mass spectrometry method for the quantification of these antipsychotics in plasma. An ultra‐high performance liquid chromatography–mass spectrometry assay was developed for the determination of the drugs and metabolites. Gradient elution was performed on a reversed‐phase column with a mobile phase consisting of ammonium acetate, formic acid in methanol or in Milli‐Q ultrapure water at a flow rate of 0.5 mL/min. The method was validated according to the US Food and Drug Administration guidelines. The analytes were found to be stable enough after reconstitution and injection of only 5 μL improved the accuracy and precision in combination with the internal standard. Calibration curves of all five analytes were linear. All analytes were stable for at least 72 h in the autosampler and the high quality control of 9‐OH‐risperidone was stable for 48 h. The method allows quantification of all analytes. The advantage of this method is the combination of a minimal injection volume, a short run‐time, an easy sample preparation method and the ability to quantify all analytes in one run. Copyright © 2015 John Wiley & Sons, Ltd.     

Experimental study and numerical modeling of brittle fracture of carbonate rock under uniaxial compression

The brittle carbonate rock taken from the Tarim Oilfield is tested in laboratory under uniaxial compression. The acoustic emission (AE) is used to monitor the microcracking activity in rock during the experiment. Moreover, the 3D tomograms of carbonate rock after uniaxial compression are obtained by using CT imaging technology, which indicates that microcracks mutually interconnect and eventually form macroscopic fractures after failure. The PFC2D is used to model the behavior of brittle rock including microcracks propagation. The stress–strain curve and cracks distribution in rock model are obtained from the PFC simulation. The numerical results agree with the experimental test well.     

Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites

The Fused Deposition Modelling (FDM™) process owes its popularity to its hardware versatility, low cost and wide range of materials (and colours) available. In this study, PEEK was produced with 1% and 5% carbon nanotubes (CNTs) and processed in a modified FDM system able to operate with high temperature polymers. The tensile strength, layer bonding and microstructure of the plain and CNT loaded PEEK samples were investigated throughout the three steps of manufacturing: compounded composite feedstock filaments, single FDM deposited layers and fabricated test specimens. Interestingly, every step of processing seems to fabricate structures of lower performance. As part of the characterisation of the FDM structures, short shear beam tests were used as a new method to assess layer-to-layer bonding.     

Size control of phase‐separated liquid crystal droplets in a polymer matrix based on the phase diagram

When a mixture of liquid crystal (LC) and photo reactive monomer is irradiated by UV light, polymerization occurs and LC droplets form through phase separation, producing polymer dispersed LCs (PDLCs). Although size control of LC droplets and reduced amounts of LC in PDLC films are important in applications, precise size control of LC droplets at a low LC fraction has not yet been accomplished. In this study, the phase diagrams of the LC/initial monomer and the LC/polymer during polymerization were used to control LC droplet size at various LC fractions. Both the relative position of the sample in the initial phase diagram and the shift of the phase separation line during polymerization were shown to be important in determining the size of LC droplets. Our results are expected to provide a new strategy for precise size control of LC droplets especially at a low LC fraction range, which would be a great help for PDLC applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Comparison of scale factor estimators for ultrasonic temperature monitoring: Application to structural health monitoring

In Structural Health Monitoring (SHM) of materials, estimating the effects of environmental and operational conditions such as temperature is important. Indeed, temperature changes induce modifications of the mechanical properties of the material and therefore cause a dilation of the acoustic signals characterized by a scale factor. This paper described four scale factor estimators able to monitor changes in temperature: The short-time cross-correlation (STXC) method, the stretching method (STRE), the Minimum Variance Based Estimator method (MVBE) and the Scale Transform Based Estimator method (STBE). The first two methods have already been assessed in the literature while the latter two have been specifically developed for this study. First, closed-form for the Cramer-Rao bound on the estimates of the scale factor, from a simplified deterministic signal, are derived and simplified expressions are given. Then, a statistical evaluation of the quality of estimates is conducted through Monte-Carlo simulations using synthetic signals, based on a model taking into account the influence of temperature. A raw estimate of the computational complexity of signal processing methods also completes this evaluation phase. Finally, the experimental validation of estimation methods is conducted on an aluminum plate subjected to temperatures variations in a controlled thermal environment. The temperature estimates are then faced with an analytical model describing the material behavior.     

Vibrational spectroscopy in the development of surface hydrophilic elastomer latex (SHEL)

An illustrative example is given to show how various vibrational spectroscopy techniques coupled with two-dimensional (2D) correlation analysis can be effectively utilized in the development of a novel and functional material. Surface-hydrophilic elastomer latex (SHEL) is a material exhibiting rather unusual permanently water-wettable surface feature despite having a soft and rubbery bulk property, which can be successfully analyzed with vibrational spectroscopy. 2D photoacoustic (PAS) IR spectra of a SHEL film indicate the localized surface segregation of long-chain ethoxylate moiety of the oligomeric surfactant used in the preparation of this material. The accumulation of the hydrophilic long-chain ethoxylate produces the high energy polar surface over the hydrophobic bulk phase of SBR copolymer. The persistence of very low water contact angle, even after repeated washing of a SHEL film with an excess amount of water, indicates permanent covalent attachment of long-chain ethoxylate group to the SBR copolymer. 2D Raman spectra generated from the process monitoring of the emulsion copolymerization of SHEL reveal the mechanism of the covalent attachment of long-chain ethoxylate. The reaction involves a separate step of oleyl moiety of the block surfactant reacting with 1,3-butadiene prior to the onset of copolymerization to produce the SBR latex product.     

A rapid and simple HPTLC assay for therapeutic drug monitoring of capecitabine in colorectal cancer patients

Capecitabine is a prodrug of 5‐flurouracil, employed as a broad spectrum chemotherapeutic agent. It is also used as monotherapy or a combination chemotherapy agent for the treatment of colorectal cancer. Capecitabine is administered in combination with oxaliplatin and hence it is essential to determine that co‐administration does not affect its metabolism. To determine the plasma concentration of capecitabine a simple HPTLC method was developed and validated. Blood samples from 12 patients with colorectal cancer were collected and analyzed by the HPTLC method with a reference internal standard. Out of these 12 patients, six were treated with capecitabine monotherapy and another six were treated with capecitabine + oxaliplatin combination therapy. The results of analysis indicated that there was no significant drug–drug interaction and the co‐administration of oxaliplatin did not affect the metabolism of capecitabine. This method is sensitive, robust and specific and allows analysis of multiple samples simultaneously, making it suitable for therapeutic drug monitoring of capecitabine.