Critical size and surface effect of the hydrogen interaction of palladium clusters

Metal hydrides are used for electrochemical or gaseous storage of hydrogen because considerable amounts of hydrogen are reversibly absorbed and desorbed at interstitial sites. Palladium is often used as a model system. Nanophase material is of interest because properties related to the hydrogen absorption are size dependent. In this study, clusters from the size of 55 to 1415 atoms are investigated and compared with bulk Pd. It turns out that not only the amount of hydrogen per palladium that can be intercalated changes but also kinetics and chemical potentials are dependent on the cluster size. The clusters used for this study were chemically synthesised and stabilised by a ligand shell. Received 9 October 1998 and Received in final form 10 May 1999     

Kinetic modelling of ultrasound-assisted extraction of phenolics from cereal brans

Cereal brans are by‐products of the milling of cereal grains, which are mainly used as low value ingredients in animal feed. Wheat and oat bran is a rich source of bioactives and phytochemicals, especially phenolic compounds. Within this study, the application of ultrasound (US) technology to assist the extraction of phenolics from oat and wheat bran was investigated (20–45 kHz). Peleg’s mathematical model was used to study the kinetics of ultrasound-assisted extraction (UAE) and subsequent stirring of total phenolic compounds (TPC). The surface morphology of cereal brans after extraction was studied using SEM analysis. The excellent agreement was determined between the values of TPC calculated from Peleg’s mathematical model and actual experimental results. The constant that represents a time required for the initial phenolic concentration to be extracted to one-half of its initial value has been introduced (K_1/2). It was shown that the TPC extraction kinetics was dependent only on K_1/2 enabling fast kinetics fitting and comparison between extraction rates. Moreover, different values of K_1/2 constant could indicate the differences in brans composition and consequently different influence of US pretreatment on these samples.     

蒙药阿木日-6多糖的提取与含量测定

本文采用热水提取-乙醇沉淀的方法从蒙药阿木日-6中提取多糖,采用硫酸-苯酚法进行了糖含量的测定,求得其回归方程为y=0.00745x 0.2172,相关系数为r=0.9991,平均回收率为102.1%,RSD=0.84%(n=5).     

HFC/HC混合工质共沸点的推算

HFC/HC混合工质的气液性平衡实验研究结果表明,该类型混合工质大多存在共沸现象。根据形成共沸点的热力学条件,以PR状态方程结合vdW混合法则,利用建立的二元相互作用系数k_ij差值关联模型,对10种HFCs工质（HFC23、HFC32、HFC125、HFC143a、HFC134a、HFC152a、HFC227ea、HFC236fa、HFC236ea、HFC245fa）与3种HCs工质（HC290、HC600a、HC600）相互组合而成的30种HFC/HC混合工质进行了共沸点判断和共沸点性质推算,并与已有气液相平衡实验数据的体系进行对比。结果表明该方法可用于推算HFC/HC混合工质共沸点性质。     

Effect of temperature,collection mode,and modifier on the supercritical CO2 extraction of dicofol residues from fish samples

Toxicity evaluation of Dicofol to Astyanax bimaculatus schubarti, a characteristic fish species living in tropical rivers and lakes was carried out through LC₅₀ – 96 Hours. These experiments were performed under laboratory controlled conditions with atmospheric air flow and dilution water at 25°C in the static mode, supercritical fluid extraction (SFE) with pure CO₂ and CO₂ modified with hexane and methanol were used at 50, 70, 80, and 100°C and 300 atm. Several collection modes were studied to extract Dicofol from fish samples. The extraction efficiencies were directly comparedd with those obtained after 8 h of Soxhlet extraction using the same clean-up with Florisil and analysis by HRGC/ECD and HRGC/MS as a confirmatory analytical technique. The SFE recoveries at temperatures lower than 80°C were typically lower than soxhlet recoveries; however a temperature increase enhanced the efficiency of SFE. The results showed that under certain conditions, supercritical fluid gave higher extractio power (extracted 11 % more pesticide), shorter extraction time, and lower solvent consumption than Soxhlet, thus affording an excellent alternative to the conventional method for extracting Dicofol from fish sample.     

Phase equilibria of binary mixtures containing methyl acetate,water, methanol or ethanol at 101.3 kPa

Isobaric vapor–liquid equilibria data at 101.3?kPa were reported for the binary mixtures (methyl acetate?+?(water or methanol or ethanol), methanol?+?(water or ethanol) and (ethanol?+?water)). The experimental data were tested for thermodynamic consistency by means of the Wisniak method and were demonstrated to be consistent. The experimental data were correlated using Wilson, NRTL and UNIQUAC models for the activity coefficients and predicted using the UNIFAC and PSRK equation of state for testing theirs capability. The results show that the obtained data for the studied binary systems are more reliable than other published data.     

Ternary Liquid-Liquid Equilibria Of (Acetonitrile + n-Octane + Propanols or Butanols)

Abstract

The liquid-liquid equilibria of (acetonitrile + n-octane + 1-propanol or 2-propanol or 1-butanol or 2-butanol, or iso-butanol or tert-butanol) at 298.15 K have been measured. The ternary experimental results agree well with those predicted from the UNIQUAC associated-solution model with binary parameters alone.     

Study of factors influencing pressurised solvent extraction of polar steroids from plant material. Application to the recovery of withanolides

Summary Pressurised solvent extraction was applied to the extraction of three withanolides from the leaves oflochroma gesnerioides. A study was carried out of the influence of various parameters on the extraction efficiency and kinetic parameters; these included the nature of the extracting solvent, its flow rate, the pressure and temperature, as well as the particle size of the plant material. The pressurised solvent extraction method compared to a conventional Soxhlet extraction showed similar recoveries and extraction selectivity but the total handling time and solvent volume were dramatically reduced.     

Validation of a high-performance liquid chromatographic method for determination of isoflavonoids in soybeans. Study of the extraction procedure by experimental design

Summary An improved analytical method, reversed-phase high-performance liquid chromatography on a narrow-bore C₁₈ column, has been developed for the simultaneous determination of genistein, daidzein, formononetin, and biochanin A. The method was validated in terms of detection limits, quantitation limits (LOQ), linearity, and precision.LOQ in the 0.04–0.1 μg mL⁻¹ range were calculated, enabling determination of these compounds of nutritional concern at trace levels. Good linearity was demonstrated over three orders of magnitude of concentration for each analyte (r ²=0.998–1.000). The intra-day repeatability was evaluated in terms ofRSD (%) at two concentration levels for each analyte (RSD (%) <1.8%). Good inter-day reproducibility of data was proved by performing homoscedasticity and ANOVA tests (P>0.05 at the 95% confidence level). The method was applied to the determination of genistein and daidzein in yellow soybeans, after optimization of the method for extraction of isoflavonoid aglycones from soybeans by experimental design, i.e. central composite design. Extraction recoveries up to 87±4% were obtained when the corresponding glycosidic forms (genistin and daidzin) were added to soybean samples.     

High-pressure phase equilibrium data for the (carbon dioxide + l-lactide + ethanol) system

Experimental phase equilibrium values (cloud points) for the ternary system involving carbon dioxide, l-lactide and ethanol have been measured in order to provide fundamental values to conduct the polymerization reaction in supercritical carbon dioxide medium. The experiments were performed using a variable-volume view cell over the temperature range from 323 K to 353 K, system pressure between 9 MPa and 25.0 MPa and different mole ratios of ethanol to l-lactide (0.5:1, 1:1 and 1.5:1). Phase transitions of vapour-liquid types were observed. The experimental results were modelled using the Peng–Robinson (PR) equation of state with the Wong–Sandler (PR–WS) mixing rule, providing a good representation of the experimental phase equilibrium values.