Flow‐Injection Amperometric Detection with Solvent Polymeric Membrane Ion Sensors

An amperometric detector for hydrophobic ions based on a plasticized poly(vinyl) chloride (PVC) membrane incorporated in a flow‐injection system was developed. A four‐electrode potentiostat with ohmic drop compensation was used, while a flow‐through cell incorporated the four electrodes and the membrane, which contained tetrabutylammonium tetraphenylborate. When the influence of the applied potential and of the flow‐injection variables on the determination of tetrabutylammonium was studied, a linear relationship was observed between current peak height and ion concentration over a range of 5×10^?6–6×10^?5 M tetrabutylammonium. Good repeatability and between‐day reproducibility and high sample frequency were obtained. The effect of other ions was studied. Two different amperometric methods, indirect and direct, were also developed for the determination of dodecylsulfate in the concentration range 3×10^?5–9×10^?4 M.     

Different Views on the Stability of Protein Conformations and Hydrophobic Effects

Apparently contradictory statements about the thermodynamics of aqueous protein solutions and of hydrophobic effect are quoted and discussed. Some credibility is found in the divergent points of view and it is pointed out that they focus attention on different aspects of the complicated conditions in aqueous solutions, some of which are more important than others for the stability of protein conformations.The importance of characteristics of solvent water is emphasized, in particular (1) the strong mutual cohesion of water molecules, and (2) structural changes of water induced by (nonpolar) solute molecules. It is stressed that consideration of only one of these effects and an inexpedient choice of standard states are origins of confusion in the literature about aqueous systems. A simple approach to hydrophobic effects considering both of the above mentioned effects, is proposed.     

SO4●－自由基氧化酪氨酸反应中的溶剂效应

研究了水-乙腈混合溶液中SO4●－自由基氧化酪氨酸的反应.实验结果表明，SO4●－自由基氧化酪氨酸的反应机制不因乙腈的加入而改变，但所产生的瞬态粒子的动力学行为受到较大影响.随介质中乙腈体积分数的增加，SO4●－的衰变速率减慢而酪氨酸中性自由基（TyrO●）的衰变速率加快.我们认为这两种自由基所呈现出来的相反的溶剂效应是由于其所带电荷的不同.随介质中乙腈体积分数的增加，SO4●－氧化酪氨酸的反应速率减慢.这一实验结果意味着，在有机溶剂存在的情况下TyrO●/ TyrOH的氧化还原电势可能发生了变化，从而旁证了关于TyrO●/ TyrOH的氧化还原电势因酪氨酸从游离状态变到肽或蛋白质中而发生变化的推测.     

Calix [ 4 ] arene Polyaza Derivatives： Novel Effective Neutral Receptors for Cations and α-Amino Acids

IntroductionCalixarenes are one of the most important supra-molecular building blocks, which can be modified byintroducing different functional and/or structural groupsto create a specific interaction between the host and thetarget molecules, such as meta…     

Rearrangements of N-alkyl-/aryl-nitrones derived from 4-oxo-4H-1-benzopyran-3-carboxaldehyde--a solvent-dependent process

C-(4-Oxo-4H-1-benzopyran-3-yl)-N-alkyl-/aryl-nitrones derived from 4-oxo-4H-1-benzopyran-3-carboxaldehyde, rearrange to 2-alkyl-/aryl-amino-3-formylchromone and/or 3-(alkyl-/aryl-aminomethylene)chroman-2,4-dione depending upon the reaction medium. 3-(Alkylaminomethylene)chroman-2,4-dione has been utilized in the synthesis of 1-benzopyrano[3,4-d]isoxazole-4-one.     

Qualitative supercritical fluid extraction coupled to capillary gas chromatography

The usefulness and ease of utilizing supercritical fluid extraction (SFE) directly coupled to capillary gas chromatography (GC) as quantitative or qualitative analytical problem-solving tools will be demonstrated. As an alternative to conventional liquid solvent extractions, SFE presents itself as a means to achieve high extraction efficiencies of different compounds in complex solid matrices in very rapid tims frames. Moreover, SFE has an additional advantage of being able to achieve distinct extraction selectivities as a function of the solubilizing power of the supercritical fluid extracting phase. For on-line SFE/GC, the extraction effluent is directly transferred to the analytical chromatograph. On-line SFE/GC involves the decompression of pressurized extraction effluent directly into a heated, unmodified capillary split injection port of the GC. In this respect, SFE introduction into GC can be used as an alternative means of GC injection, comparable to such modes of injection as pyrolysis and thermal desorption. This paper will show applications of SFE/GC where mass spectrometric detection together with flame ionization detection was used for component identification from environmental, tobacco, and petroleum matrices.     

Spectrophotometric Determination of Rhenium(IV) with Thiocyanate,TX-100 and N,N′-Diphenylbenzamidine

A spectrophotometric method to determine rhenium(IV) at trace level is based on the extraction of Re(IV)-SCN^? complex in sulphuric acid media with N,N′-diphenylbenzamidine(DPBA) in presence of a non-ionic surfactant triton X-100 (TX-100) in chloroform. The complex shows maximum absorbance at 435 nm with amolar absorptivity value of 4.24 × 10⁴ L mol^?1 cm^?1 at an acidity range 3.5-6.5 M H₂SO₄. The method followed Beer's Law for the system Re(IV)-SCN^?(TX-100)-DPBA upto 4.0 μg Re(IV) mL^?1. The detection limit of the method is 5 ppb. None of the tested foreign ions, except molybdenum(VI), interfere with the determination of rhenium. The interference due to molybdenum could effectively be removed by prior precipitation with oxine. The effect of various analytical parameters on the extraction of the metal are discussed.     

Solvent extraction of permanganates (Na, K) by 18-crown-6 ether from water into 1,2-dichloroethane: elucidation of an extraction equilibrium based on component equilibria

Ion-pair formation constants (K_MLA mol⁻¹ dm³) of Na⁺– and K⁺–18-crown-6 ether (18C6) complexes with MnO₄⁻ in water (w) were determined potentiometrically at 25 °C. Simultaneously, extraction constants (K_ex mol⁻² dm⁶) of the permanganates with 18C6 from w into 1,2-dichloroethane at 25 °C were obtained from the spectrophotometric determination of distribution ratios of the permanganates. These K_ex values were divided into K_MLA and other three component equilibrium constants and thereby extraction-selectivity and -ability were discussed in comparison with corresponding metal picrate–18C6 extraction systems reported before.     

Solvatochromism in Binary Solvent Mixtures by Means of a Penta‐tert‐butyl Pyridinium N‐Phenolate Betaine Dye

The solvatochromic behavior of a penta‐tert‐butyl prydinium N‐phenolate betaine dye was studied using UV‐visible spectrophotometry in several binary mixture solvents. The solvent polarity parameter, E_T (1) (kcal. mol^?1) was calculated from the position of the longest‐wavelength intramolecular charge transfer absorption band of this penta‐tert‐butyl betaine dye. For binary solvent mixtures, all plots of E_T (1) versus the mole fraction of a more polar component are nonlinear owing to preferential solvation of the probe by one component of the binary solvent mixture. In the computation of E_T (1) it was assumed that the two solvents mixed interact to form a common structure with an E_T (1) value not always intermediate between those of the two solvents mixed. The results obtained are explained by the strong synergism observed for some of the binary mixtures with strong hydrogen bond donors (HBD) solvents such as alcohols.     

Investigation on the Extraction Mechanism of Au（I） from Cyanide Solution with Quaternary Ammonium System

During the past decades, there has been a renewed interest in the application of solvent extraction to the recovery of Au (I) from cyanide solutions1,2. Among those various extractants, the amine extractants with the addition of organic phosphorus oxide as cosolvent have been widely investigated3,4. Various diluents and modifiers have been selected to optimize the extraction system so as to increase the loading capacity, improve the selectivity and/or reduce emulsification5. Quaternary amm…