Crystallization,melting and structure of polypropylene/poly(vinylidene-fluoride) blends

Blends were prepared from isotactic polypropylene (iPP) along with its b-nucleated form and poly(vinylidene-fluoride) (PVDF). Melting, and crystallization characteristics as well as structure of the blends were studied by polarized light microscopy (PLM) and differential scanning calorimetry. According to PLM studies, the phase structure of these blends is heterogeneous in the molten state. The temperature range of crystallization of PVDF during cooling is higher than that of iPP. PVDF has a strong α-nucleating effect on iPP. The crystallization of iPP starts on the surface of dispersed PVDF droplets and an α-transcrystalline layer forms on the surface of the crystalline PVDF phase. The iPP matrix crystallizes predominantly in a-form in spite of the presence of a highly active b-nucleating agent. This revised version was published online in August 2006 with corrections to the Cover Date.     

Copolymerization of propylene with higher α‐olefins in the presence of the syndiospecific catalyst i‐Pr(Cp)(9‐Flu)ZrCl2/MAO

The catalyst system i‐Pr(Cp)(9‐Flu)ZrCl₂/methylaluminoxane was used for the synthesis of random syndiotactic copolymers of propylene with 1‐hexene, 1‐dodecene, and 1‐octadecene as comonomers. An investigation of the microstructure by ¹³C NMR spectroscopy revealed that the stereoregularity of the copolymers decreased because of an increase in skipped insertions in the presence of the higher 1‐olefin. The melting temperature of the copolymers, as measured by differential scanning calorimetry (DSC), decreased linearly with increasing comonomer content independently of the comonomer nature. During the DSC heating cycle, an exothermic peak indicating a crystallization process was observed. The decrease in the crystallization temperature with higher 1‐olefin content, measured by crystallization analysis fractionation, indicated a small but significant dependence on the nature of the comonomer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 128–140, 2002     

Characterization of the changes in the initial morphology for MgCl2-supported Ziegler-Natta polymerization catalysts

Recently considerable detail has become available on the initial morphology and the morphological changes that occur for silica based Cr catalysts for ethylene polymerization. These catalysts are produced as a dry powder and may be employed either in gas phase or in slurry processes. MgCl₂-supported Ziegler-Natta polymerization catalysts are often prepared and employed as slurries. They usually are never dried and thus few studies have employed the spectra of physical techniques common to the characterization of pore structure. In the current study, we have carefully removed the solvent for both ball-milled and precipitated MgCl₂-supported catalysts. These catalysts are characterized by physical sorption, mercury porosimetry, and electron microscopy both as prepared and during the initial stages of polymerization (to ～ 100 g of polymer/g of catalyst). We find that the initial catalyst may be represented by a complex agglomerate of small crystallites as contrasted with the branched pore network found in Cr/silica catalysts. As a result, it is concluded that the initial fragmentation of the MgCl₂ based systems is more uniform as contrasted with the progressive fragmentation of the silica-based system. This fragmentation mechanism facilitates the retention of greater polymer/catalyst surface during the initial stages of the polymerization. © 1992 John Wiley & Sons, Inc.     

Improved experimental characterization of crystallization kinetics

Polymer solidification occurring in many processes, like for instance injection molding, compression molding and extrusion, is a complex phenomenon, strongly influenced by the thermo-mechanical history experienced by the material during processing. From this point of view, characterization of polymer crystallization in the range of processing conditions, i.e. including high cooling rate, is of great technological and academic interest. Quiescent, non-isothermal crystallization kinetics of two polypropylene resins were investigated using a new method, based on fast cooling of thin samples with air/water sprays and optical detection of the crystallization phenomenon. The range of cooling rates attained in this experimental study is considerably larger than that achieved by traditional methods. Quiescent crystallization kinetics of the resins is also investigated by the means of DSC, operated under isothermal conditions with a limited degree of under-cooling and for constant cooling rates up to about 1 K s⁻¹. The results demonstrate the importance of performing fast cooling experiments to gather reliable crystallization kinetics data.     

Facile synthesis of oligo(4‐methoxyphenol) in water and evaluation of its efficiency in stabilization of polypropylene

A hindered polyphenol, oligo(4‐methoxyphenol), has been first successfully synthesized via a mild biocatalytic pathway using horseradish peroxidase as catalyst in water without any additive. Then the efficiency of oligo(4‐methoxyphenol) in stabilization of polypropylene (PP) was evaluated in terms of thermal analysis and accelerated aging test. It was observed that the apparent activation energy for thermal decomposition of PP/oligo(4‐methoxyphenol) calculated by Friedman's method is higher than that of virgin PP. Oligo(4‐methoxyphenol)‐stabilized PP maintains its tensile strength even after aging at 120°C for 800 hours. Oxidation induction time and onset oxidation temperature of PP/oligo(4‐methoxyphenol) are higher than both virgin PP and PP/4‐methoxyphenol, as well as PP stabilized with commercially available 6‐di‐tert‐buty‐4‐methylphenol or 1076. These results indicate that oligo(4‐methoxyphenol) can effectively improve the thermo‐oxidative resistance of PP. Noting that oligo(4‐methoxyphenol) is synthesized via enzymatic polymerization in water under mild condition with a facile procedure, oligo(4‐methoxyphenol) is thus proposed as a new efficiency and readily available antioxidant for PP.     

Synthesis of a novel hyperbranched and phosphorus‐containing charring‐foaming agent and its application in polypropylene

In this work, a novel hyperbranched and phosphorus‐containing triazine derivative (HPCFA) is synthesized. HPCFA is used as charring‐foaming agent and combined with ammonium polyphosphate (APP) as intumescent flame retardant to flame retard polypropylene (PP). PP/HPCFA/APP composite can achieve limited oxygen index value of 31% and pass UL 94V‐0 rating by addition of 20 wt% HPCFA/APP (1/2, w/w). Besides, HPCFA is compared with another hyperbranched charring‐foaming agent (HCFA). HPCFA and HCFA have similar chemical structure, and their only difference is that HPCFA has phosphorus‐containing unit in the main chain compared with HCFA. HPCFA/APP system exhibits superior flame retardancy compared with HCFA/APP system. Char residue analysis demonstrates that HPCFA/APP system can form denser and more compact char layer in comparison with that of HCFA/APP system.     

等离子体引发聚丙烯接技苯乙烯共聚物的合成及性能

将等离子体接枝技术用于聚丙烯接枝苯乙烯共聚物的合成．ＦＴ ＩＲ、ＳＥＭ及ＸＰＳ证明所得产物为接枝共聚物．研究了不同等离子体处理体系压强、处理功率，反应瓶不同直径、体积，不同接枝聚合反应时间、温度对接枝率的影响．利用接枝共聚物制备了硫酸钠型离子交换膜，并对其电性能进行了初步探讨．     

Small-angle x-ray scattering of distorted lamellar structures

Small-angle x-ray scattering (SAXS) intensity for the lamellar structure of polymeric materials has been formulated with consideration of structural defects such as the finiteness of the lamellar stack, the lamellar bend, and the paracrystalline distortions. In particular, the effects of the lamellar bend on the SAXS profile have been elucidated on the basis of Vonk'xss formula γ₁(x) – γ(x)exp(?2x/d). Here, the scattering profile due to the lamellar bend is shown to be expressed by a Cauchy function. The integral breadth is equal to 2π/d, being independent of the order of scattering. As an example of the SAXS analysis based on the theory, the characterization of the lamellar structure in the “hard” elastic polypropylene films is reported. The long period and the lamellar thickness are evaluated from the correlation function, and the distortion length and Hosemann's g factor are estimated according to the procedure presented here. On the basis of these structural parameters, the relationship between the manufacturing process and the lamellar structure of the polypropylene films is discussed. © 1993 John Wiley & Sons, Inc.     

聚丙撑碳酸酯的流动性能

聚丙撑碳酸酯的流动性能王胜杰，黄玉惠，丛广民（中国科学院广州化学研究所广州５１０６５０）关键词聚丙撑碳酸酯，流动性能，表观粘度，粘均分子量聚丙撑碳酸酯（ＰＰＣ）是由二氧化碳和环氧丙烷共聚而成的新型含端羟基脂肪族聚碳酸酯［１］，作为对它的基本表征之一，...     

聚甲基丙烯酸甲酯/石墨薄片纳米复合及其导电性能研究

在聚合物绝缘材料基体中添加入足够数量的导电填料 ,聚合物便具有导电性或半导体性能 .石墨材料 ,由于资源丰富、价廉、性质稳定 ,被广泛用作导电聚合物复合材料的填料 .一般 ,填料含量越高 ,复合材料的导电性能越好 ,但是材料的力学性能也随之劣化 ,特别是材料脆性增加 .将石墨加工成纳米级粒子 ,再与聚合物纳米复合 ,有望用较少的石墨填充量使复合材料具有良好的电传导性能 ,从而保持材料的力学性能 .最近报道的利用膨胀石墨与聚合物实现纳米复合的研究引起了人们的兴趣 ,如所报道的尼龙 6 膨胀石墨[1] 、PS PMMA 膨胀石墨[2 ] 、PP …