聚丙烯基纳米碳纤维复合材料结晶行为研究

采用示差扫描量热法(DSC)研究了纳米碳纤维对PP／CNF复合材料中PP结晶行为的影响。结果表明：纳米碳纤雏可提高PP的结晶温度，但略降低其结晶速率和结晶度。提高纳米碳纤雏含量或减小纳米碳纤雏直径，PP结晶行为的上述变化更为明显，但结晶速率随纳米碳纤维含量出现先减小后增大的趋势。     

反相液体色谱中饱和醇保留行为的研究 Ⅰ.低碳醇保留行为与溶质分子结构的关系

本文从吸附-疏溶剂理论出发,根据热力学平衡观点,导出了一定固定相和流动相时,描述溶质保留行为与其分子结构关系的理论模型,并用之预测了饱和醇的保留值,获满意结果。从而表明本模型不但能用于同系物,而且亦可用于同分异构体及立体异构体保留行为的预测。     

Conformations of fold part in isotactic polypropylene lamella with diamond lattice model

Ｉｎｔｈｅｆｉｅｌｄｏｆｐｏｌｙｍｅｒｐｈｙｓｉｃｓ,ｔｈｅｃｒｙｓｔａｌｌｉｎｅｓｔａｔｅｏｆｐｏｌｙｍｅｒｓｈａｓｌｏｎｇｂｅｅｎｏｆｉｎｔｅｒｅｓｔ.ＴｈｅｅｘｉｓｔｅｎｃｅｏｆｐｏｌｙｍｅｒｓｉｎｇｌｅｃｒｙｓｔａｌｗａｓｆｉｒｓｔｄｉｓｃｏｖｅｒｅｄｂｙＪａｃｃｏｄｉｎｅ[1]ｉｎ1955.Ｔｈｅｔｈｉｃｋｎｅｓｓｏｆｍｏｓｔｓｏｌｕｔｉｏｎｇｒｏｗｔｈｃｒｙｓｔａｌｓｉｓｆｏｕｎｄｔｏｂｅｏｆｔｈｅｏｒｄｅｒｏｆ～10ｎｍ.Ｔｈｉｓｏｂｓｅｒｖａｔｉｏｎｉｓｓｏｍｅｗｈａｔｓｕｒｐｒｉｓｉｎｇ.Ｓ…     

Investigation of glow discharge plasma for surface modification of polypropylene

Material surface properties of polymers, plastics, ceramics and textiles can be modified by atmospheric or low‐pressure glow discharge plasma. The aim of the present work is to study the surface modification of biaxially oriented polypropylene (BOPP) film in order to improve its hydrophilic and wetting properties. In this article we used low‐pressure, low‐temperature oxygen plasma for the surface treatment of BOPP. Scanning electron microscopy indicates that plasma treatment causes mainly physical changes by creating microcraters and roughness on the surface and increasing surface friction. Attenuated total reflectance infrared spectra show oxygen‐containing groups such as ? OH at 3513 cm^?1 and C?O at 1695 cm^?1. Microscopic investigations of water droplets on BOPP (treated, untreated) show that the interfacial adhesion of treated surfaces is increased. Copyright © 2003 John Wiley & Sons, Ltd.     

Vacuum-ultraviolet induced oxidation of the polymers polyethylene and polypropylene

The emission from low-pressure microwave plasmas in the vacuum-ultraviolet (VUV) region (λ < 200 nm) was investigated in order to use these plasmas as light sources for the study of the VUV photochemistry of polyethylene (PE) and polypropylene (PP) as part of the study of plasma-polymer interaction. These polymers, immersed in low-presure oxygen, were exposed to radiation with wavelengths down to 112 nm, the cut off of magnesium fluoride used as a window to separate the polymer specimen from the plasma light source. Total oxygen incorporation in the surface [O], and the formation of hydroxyl, carbonyl, and carboxyl groups were measured using XPS in combination with chemical derivatizations, particularly their dependence upon the radiation spectrum and the oxygen pressure around the sample. In most experiments the surface oxygen concentration [O] attained a constant value that appears to be related to the initial oxidation rate; this suggests a competition between oxygen incorporation and chain scission reactions, followed by the removal of volatile oxidation products. PE is usually oxidized to a higher level than PP, the latter appearing to be more susceptible to reaction with atomic oxygen than PE. A general initiation mechanism for the VUV experiments is proposed that allows us to explain the observed differences in behavior between PE and PP, and the results obtained under different irradiation conditions. The nature of oxidation products is in both cases very similar to what is observed after direct plasma treatment of the polymers. We conclude that short wavelength radiation contributes very appreciably to the observed surface modification effects during plasma treatment of PE and PP. © 1995 John Wiley & Sons, Inc.     

The effect of Pb and other elements found in recycled polypropylene on the manufacturing of lead-acid battery cases

Polypropylene (PP) is one of the most common plastics used in the manufacturing of lead-acid battery cases, where the recycling of the material has become common practice, being both economically viable and environmentally friendly. During the recycling process, the various components of the spent battery are separated, where the crushed battery case is washed in order to remove any excess acid and lead-containing particles. The plastic components are subsequently melted and extruded into pellets that are then blended with virgin material to injection mold new battery cases and lids. This study showed that a significant amount of lead-containing particles in the form of lead dioxide and lead sulfate remain in the recycled plastic, and are evenly distributed throughout the polymer matrix. TEM studies showed that the particles are less than 1 μm in size and X-ray diffraction analysis of ashed recycled PP samples showed the presence, amongst others, of talc, calcium carbonate, rutile and iron oxide. These compounds come from a range of fillers, flame-retardants, colorants and impurities that originated from the various original battery cases that were recycled. The study showed that modern X-ray fluorescence (XRF) analysis is a quick and reliable method to quantify the amount of the elements found in the plastic and that the concentration of Pb in the plastic can be used as a type of “tracer” to determine the amount of recycled PP used in the manufacturing of a particular battery case. The study also showed that there is possible environmental contamination, in particular with Pb and Br contained in recycled PP during the injection molding process and the burning of the plastic. The Pb- and Br-containing particles are small enough to become air-borne during the burning process of the plastic, resulting in them being part of the soot and other hydrocarbon oils that are emitted. No Pb was observed in the gases emitted during simulated low-temperature injection molding conditions; however, a significant amount of Br was detected in the gases at the lower temperatures. Clear environmental waste classification of the battery case plastic should be done before its final incineration where the amount of trace metals present and its possible contamination to the environment should be considered. Care should also be taken for machine operators who work with the recycled plastic, that no excessive exposure to the halogenated compounds is experienced.     

Influence of particle diameter distribution on protein recovery in the expanded bed adsorption process

The General Rate model has been developed and solved to describe protein adsorption in an expanded bed. The model takes into account axial and local variation of particle size distribution (PSD), external and intra-particle mass transfer resistances, and dispersion in liquid phase. The influence of PSD on breakthrough profiles has been analysed. The simulation results show that for a significantly high expanded bed the lower part of the breakthrough curve profiles, calculated for local particle size distribution (LPSD) and for axial average particle size distribution (APSD) are very similar. However, the upper part of breakthrough profiles calculated for LPSD approaches inlet concentration much more slowly than those calculated for APSD. The retention times of the lower part of uptake curves calculated with average particle diameter are constantly shorter than those obtained from LPSD. For the calculation of the dynamic capacity (DC), the LPSD can be replaced by APSD for large expanded bed heights. Using breakthrough profiles calculated for average particle size, DC values are constantly underestimated.     

Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.     

聚丙烯微孔膜基渐变聚合物的制备,结构与性能的研究

以聚丙烯微孔膜为基材，通过扩散控制原位共聚合的方法在人填充了组成沿膜的厚度方向逐渐改变的无规共聚物，Ｘ－光电子能谱（ＸＰＳ）、全反射红外光谱（ＡＴＲ）以及动态粘弹谱的分析结果。说明所制备得到的合膜具有明显的渐变聚合物性质。     

Photodegradation of polypropylene thermal bonded non-woven fabric

Samples of thermal bonded polypropylene non-woven fabrics were exposed to light from two TUV 30W G30T8 Philips lamps (λ = 253.7 nm) in a covered open-air chamber at room temperature (25 °C and 55% relative humidity) for different periods of time. In order to determine the state of degradation, the samples were examined by optical microscopy, scanning electron microscopy, staining with an isopropanol solution of methylene blue and Sudan III, colourimetry, Fourier transform infrared (FTIR) spectroscopy and density measurements. Although the bonded areas formed under complex thermal and mechanical deformations during the fabric production, no localized staining was observed. The colour of the irradiated and stained fabrics changed uniformly due to the even production of polar groups in the process of irradiation. It was found that the change of redness and blueness of degraded and stained samples can be correlated linearly with the evolution of POOH groups as determined by FTIR spectroscopy. Products containing carbonyl (CO), hydroxyl and/or hydroperoxide (POOH) groups increase with time of degradation with a non-linear relation. It was also observed that the density and 997 cm⁻¹/972 cm⁻¹ FTIR absorbance ratio increases with degradation time. Density fluctuation and the build up of degradation products caused fibre cracks and embrittlement.