An experimental study on effects of solid concentration and ζ-potential on pseudoplastic flow of suspensions

The pseudoplastic flow of suspensions, alumina or styrene-acrylamide copolymer particles in water or an aqueous solution of glycerin has been studied by the step-shear-rate method. The relation between the shear rate,D, and the shear stress,, in the step-shear-rate measurements, where the state of dispersion was considered to be constant, was expressed as = AD ^1/2 +CD. The effective solid volume fraction,ø _F, andA were dependent on the shear rate and expressed byø _F =aD ^b andA = D . Combining the above relations, the steady flow curve was expressed by = D ^{1/2 +} + ₀ (1 – a D ^b/0.74)^–1.85 D, where ₀ is the viscosity of the medium.With an increase in solid volume fraction and a decreases in the absolute value of the-potential, the flow behavior of the suspensions changed from Newtonian ( = = b = 0), slightly pseudoplastic ( = b = 0), pseudoplastic ( = 0) to a Bingham-like behavior.The change in viscosity of the medium had an effect on the change in the effective volume fraction.     

A finite element explicit algorithm for solving the temporal temperature fields

Practical calculations and numerical experiments in this paper have shown that in elements relating to a common node it is acceptable and reasonable for derivaties of temperature with respect to time on nodes of those elements to be presented with one on common node, if linear interpolation shape function is taken. The relation between the derivative of temperature to time on a certain node and the temperature on other nodes around that node may therefore be established after discretization of the differential equation is made in space by the finite element method. Then an explicit scheme for calculating the temperature fields may be constructed. The obtained algebraic equations. being simple and the procedure being straight will be its two tangible advantages and its calculating will, therefore, be fast. The stability analysis by the maximum principle, as in the example quoted, proves that the stability condition is similar to that in implicit algorithms.     

关于度量加一类几何不等式

度量加的方法用于解决某些几何极值问题是卓有成效的．利用杨路和张景中关于度量加不增加空间维数的充要条件,将度量加的一个基本的不等式推广到两个实相关有限点集的情形,它蕴涵了近期文献中的一些结果．     

Uniform Drug Loading into Prefabricated Microparticles by Freeze‐Drying

Microparticle‐based drug delivery is a promising technology for small volume bioassay platforms. The general utilization of the drug‐loaded microparticles in the in vitro bioassay platforms requires the drug loading method, which should impregnate the general drug types (e.g., water insoluble) with high payload into the variously designed microparticles. Loading the drug into the prefabricated microparticles using solvent evaporation satisfies the requirement. However, similar to the “coffee‐ring effect,” drugs are loaded in a seriously nonuniform manner, caused by the capillary flow during the evaporation process. Here, it is presented that the freeze‐drying is an efficient way to load uniform and high amount of the drug into the prefabricated microparticles. It is demonstrated that freezing solvent can block the capillary flow during the solvent removal process, improving the loading uniformity. The delivered amount of drugs is linearly proportional to the initial loading amount of drugs. Also, this drug loading method is shown to be applied to the various drug types and the prefabricated microparticles with different properties. Considering many challenges to suppress the “coffee‐ring effect” that induces nonuniform impregnation/deposition, the proposed concept can be applied not only for microparticle‐based drug delivery but also for uniform coating applications (e.g., thin‐film coating, DNA/protein microarray).     

三维空间二阶精度流体体积界面重构方法

给出三维空间网格模板含81个单元的最小二乘流体体积界面重构方法,并和Youngs方法及网格模板含125个单元的最小二乘流体体积界面重构方法进行比较.静态和动态的测试例子均表明:该方法能精确重构任意方向的平面界面,对C²光滑曲面它能达到二阶收敛精度.和网格模板含125个单元的最小二乘流体体积界面重构方法相比,在达到同样网格精度的条件下,减少了计算量,节省了计算时间,提高了计算效率.     

数值模拟微米粒子的体全息记录与再现

体全息对小粒子记录及再现的影响关系到体全息材料在粒子场检测领域的应用前景,提出结合角谱传播理论与多光栅耦合波理论进行体全息图衍射分析的方法,并数值模拟了微米量级小粒子衍射光场的体全息记录与再现。数值分析结果表明体全息理论并不能像薄全息理论那样精确的再现出原始物光。其再现光场的角谱分布相对于原始光场存在高阶衰减,这使得再现光场成像后的图像边缘模糊,而且模糊程度还会随着粒子尺寸的下降逐渐上升。虽然这一现象为粒子边缘判读带来困难,但是再现图像的径向强度分布可为提高判断精度提供有益的参考。     

多重网格法在非结构网格中的应用

将多重网格法运用于非结构网格.网格是通过聚合法得到的,网格之间是相互关联的.方程的求解采用Jamson的有限体积法.给出了二维、三维情况的数值算例.     

大容量高密度体全息数据存储

基于晶体体全息存储机理 ,采用半导体泵浦固体激光器取代氩离子激光器作为系统光源 ,设计并构建了小型体全息存储器 ,实现了 15 0 0幅等衍射效率高分辨率全息图的记录和复现 ,其存储容量大于 1 1Gbit ,存储密度大于1 4Gbit/cm3 。     

A New Cooperation Mechanism of Kinesin Motors when Extracting Membrane Tube

Membrane tubes are important functional elements for living cells. Experiments have found that membrane tubes can be extracted from giant lipid vesicles by groups of kinesin. How these motors cooperate in extracting the membrane tube is a very important issue but still unclear so far. In this paper, we propose a cooperation mechanism called two-track-dumbbell model, in which kinesin is regarded as a dumbbell with an end (tail domain) tethered on the fluid-like membrane and the other end (head domain) stepping on the microtubule. Taking account of the elasticity of kinesin molecule and the excluded volume effect of both the head domain and the tail domain of kinesin, which are not considered in previous models, we simulate the growth process of the membrane tube pulled by kinesin motors. Our results indicate that in the case of strong or moderate exclusion of motor tails, the average number of motors pulling the tube can be as high as 9 and thus motors moving along a single microtubule protofilament can generate enough force to extract membrane tubes from vesicles. This result is different from previous studies and may be tested by future experiments.     

A New Higher Order Shear Deformation Model for Static Behavior of Functionally Graded Plates

In this paper, a new displacement based high-order shear deformation theory is introduced for the static response of functionally graded plate. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, has strong similarity with classical plate theory in many aspects, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. The mechanical properties of the plate are assumed to vary continuously in the thickness direction by a simple power-law distribution in terms of the volume fractions of the constituents. Numerical illustrations concerned flexural behavior of FG plates with Metal-Ceramic composition. Parametric studies are performed for varying ceramic volume fraction, volume fraction profiles, aspect ratios and length to thickness ratios. The validity of the present theory is investigated by comparing some of the present results with those of the classical, the first-order and the other higher-order theories. It can be concluded that the proposed theory is accurate and simple in solving the static behavior of functionally graded plates.