NaAlF4: Preparation, crystal structure and thermal stability

The compound NaAlF₄ has been obtained in the form of thin fibrous crystals or fine colorless powder by condensation at 18 °C of vapors arising over chiolite Na₅Al₃F₁₄ or NaCaAlF₆, heated up to 800 °C. Thermal stability has been investigated by the methods of thermal analysis and high temperature X-ray diffraction. When heated in air, NaAlF₄ is stable up to 390-400 °C, then there is an exothermal solid state decay into Na₅Al₃F₁₄(s) and AlF₃(s). At higher temperature Na₅Al₃F₁₄(s) decays into Na₃AlF₆(s) and NaAlF₄(g). The crystal structure (space group Cmcm, a=3.6124(1) Å, b=14.9469(7) Å, c=5.2617(3) Å, V=284.10 Å³) has been determined by X-ray powder diffraction method. In the crystal structure of NaAlF₄ the octahedrons [AlF₆] are joined through vertices and form corrugated layers, sodium ion layers being located between them. The distances between the atoms of Al-F are in the range 1.791-1.814 Å, and those for Na…F are in the range 2.297-2.439 Å. In spite of limited thermal stability of the crystal form, the compound NaAlF₄ is the main component of the gas mixture over solid and molten salts in the ternary system NaF-AlF₃-CaF₂ and participates in chemical transformations between the phases at high temperature.     

Determining scaling in known phase diagrams of nonionic microemulsions to aid constructing unknown

Microemulsions based on nonionic surfactants of the ethylene oxide alkyl ether type C_mE_n, have been studied thoroughly for around 30 years. Thanks to the considerable amount of published data available on these systems, it is possible to observe trends to make predictions of phase diagrams not yet determined. Strey and Kahlweit, and subsequently Sottmann and Strey, with coworkers have studied and published phase diagrams for systems with a fixed ratio of oil to water, varying the surfactant, the so-called Kahlweit fish-cut diagrams. Some properties of the phase diagrams can be scaled to become general and not system dependent. Here are shown two examples of scaling data from phase diagrams and the use of trends to determine phase diagrams, both inside and outside a dataset. The trends of microemulsions with fixed ratio of surfactant to oil, the so-called Lund-cut diagrams, are also investigated. The trends are used to determine a new phase diagram and this is compared with previously unpublished experimental data on C₁₂E₅-Octadecane-Water system. The scalings and trends make it possible to get good estimations of many of the important properties of the phase diagrams, both temperatures and surfactant concentrations of interest, by investigating one sample in the 3-phase region of the balanced fish-cut diagram.     

Phase diagrams of the KF-K<Subscript>2</Subscript>TaF<Subscript>7</Subscript> and KF-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> systems

The phase diagrams of the systems KF-K₂TaF₇ and KF-Ta₂O₅ were determined using the thermal analysis method. The phase diagrams were described by suitable thermodynamic model. In the system KF-K₂TaF₇ eutectic points at x _KF=0.716 and t=725.4°C and at x _KF=0.214 and t=712.2°C has been calculated. It was suggested that K₂TaF₇ melts incongruently at around 743°C forming two immiscible liquids. The system KF-Ta₂O₅ have been measured up to 8 mol% of Ta₂O₅. The eutectic point was estimated to be at x _KF∼0.9 and t∼816°C. The formation of KTaO₃ and K₃TaO₂F₄ compounds has been observed in the solidified samples.     

The ternary system H2O–Fe(NO3)3–Co(NO3)2 isotherms 0 and 15 °C

The solid–liquid equilibria of the ternary system H₂O–Fe(NO₃)₃–Co(NO₃)₂ were studied by using a synthetic method based on conductivity measurements.

Two isotherms were established at 0 and 15 °C, and the stable solid phases which appear are the iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O), the iron nitrate hexahydrate (Fe(NO₃)₃·6H₂O), the cobalt nitrate hexahydrate (Co(NO₃)₂·6H₂O) and the cobalt nitrate trihydrate (Co(NO₃)₂·3H₂O).     

Crystallization of chiral compounds 4. Simple physical model for reconstruction of post-eutectic DSC traces for melting of binary enantiomeric mixtures

A theoretical model reproducing qualitative and quantitative characteristics of DSC traces for melting of eutectic enantiomeric mixtures was proposed. The method for reconstruction of an idealized trace from a fragment of the real experimental melting curve was developed. When studying a sample of intermediate enantiomeric composition, the reconstruction of the trace makes it possible to avoid ambiguity in determination of the liquidus temperature, determine the melting temperature for an enantiopure compound, and estimate the composition of the sample. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1288–1293, July, 2007.     

Assessment of the Fe-Sn-Zn phase diagram at 450°C

The Fe-Sn-Zn system is of interest because Sn is one element added to the Zn galvanizing bath to overcome the drawbacks due to the presence of Si in semi-killed steels. This work has been undertaken with the aim to understand the tin effect on the microstructure and the layers growth in batch galvanized coatings on low alloyed steels. Various experimental techniques such as metallography, scanning electron microscopy (SEM) coupled with X-ray energy dispersive spectroscopy (EDX) are used in order to characterize the microstructure and the properties of such coatings elaborated in a zinc bath enriched with tin. Solidification phenomena and layers growth mechanisms during galvanization are explained by means of the ternary phase diagram Fe-Sn-Zn at 450°C. The Calphad method allows to obtain this phase diagram from the three optimized binary phase diagrams Fe-Sn, Fe-Zn and Sn-Zn and some experimental data inside the ternary Fe-Sn-Zn system.     

Thermal Analysis of the System Na3AlF6–NaVO3

Summary. The phase diagram of the system Na₃AlF₆–NaVO₃ was determined by means of thermal analysis. The system is a simple binary eutectic one. The eutectic point was estimated at x(NaVO₃) = 0.975 and t _eut = 617°C. The XRD patterns of samples after thermal analysis revealed the presence of cryolite and NaVO₃ only supporting the above assumption of a simple eutectic binary system.     

Phase diagram of Na2S2O3 + ethanol + water at ambient pressure and temperature

In the present communication, we report the studies concerning liquid–liquid–solid equilibria for the ternary system sodium thiosulphate (Na₂S₂O₃) + ethanol + water at ambient pressure and at room temperature (303 ± 2 K). The solubility data of Na₂S₂O₃ are reported for solutions in water, ethanol and solutions of varying concentrations of ethanol in water. The phase diagram for the said system is developed, described and compared with similar system K₂CO₃ + methanol + water. These results have been explained in terms of structural properties of aqueous ethanol solutions and further discussed in terms of the effect of ions to cause phase separation.     

Rapid QM/MM approach for biomolecular systems under periodic boundary conditions: Combination of the density‐functional tight‐binding theory and particle mesh Ewald method

A quantum mechanical/molecular mechanical (QM/MM) approach based on the density‐functional tight‐binding (DFTB) theory is a useful tool for analyzing chemical reaction systems in detail. In this study, an efficient QM/MM method is developed by the combination of the DFTB/MM and particle mesh Ewald (PME) methods. Because the Fock matrix, which is required in the DFTB calculation, is analytically obtained by the PME method, the Coulomb energy is accurately and rapidly computed. For assessing the performance of this method, DFTB/MM calculations and molecular dynamics simulation are conducted for a system consisting of two amyloid‐β(1‐16) peptides and a zinc ion in explicit water under periodic boundary conditions. As compared with that of the conventional Ewald summation method, the computational cost of the Coulomb energy by utilizing the present approach is drastically reduced, i.e., 166.5 times faster. Furthermore, the deviation of the electronic energy is less than . © 2016 Wiley Periodicals, Inc.     

Monte Carlo NPT系综法模拟考察几种水模型

应用NPT系综法模拟考察了五种水的势能模型 .模拟中采用周期边界条件、Metropolis抽样方法 ,并用Ewald方法对水分子间电荷作用进行长程校正 .模拟计算了内能 ,密度 ,压力及恒压热容等性质 .同时 ,还对这五种模型模拟得到的径向分布函数作了分析 .结果与文献及实验测定相比符合较好