原位电化学合成铁基电极材料及其超级电容器性能

采用胶体纳米粒子为模型进行研究。假设活性阳离子均匀分布在导电碳与粘结剂中,电解液离子的渗入可以原位形成活性胶体团簇。通过原位电化学方法合成了不同组成的铁基超级电容器电极材料。在不同的阳离子电解液中,铁胶体离子电极的电容不同,其中在KOH、NaOH、LiOH电解液中分别为1 113、927、755 F·g^-1。通过胶体的介尺度结构构筑,实现离子到材料性能的跨尺度可控调节。通过对胶体模型的拓展,提供了原位组成调节到材料性能跨尺度调控的新方法。     

Probing the Brønsted Acidity of the External Surface of Faujasite-Type Zeolites

We outline two methodologies to selectively characterize the Brønsted acidity of the external surface of FAU-type zeolites by IR and NMR spectroscopy of adsorbed basic probe molecules. The challenge and goal are to develop reliable and quantitative IR and NMR methodologies to investigate the accessibility of acidic sites in the large pore FAU-type zeolite Y and its mesoporous derivatives often referred to as ultra-stable Y (USY). The accessibility of their Brønsted acid sites to probe molecules (n-alkylamines, n-alkylpyridines, n-alkylphosphine- and phenylphosphine-oxides) of different molecular sizes is quantitatively monitored either by IR or ³¹P NMR spectroscopy. It is now possible, for the first time to quantitatively discriminate between the Brønsted acidity located in the microporosity and on the external surface of large pore zeolites. For instance, the number of external acid sites on a Y (LZY-64) zeolite represents 2 % of its total acid sites while that of a USY (CBV760) represents 4 % while the latter has a much lower framework Si/Al ratio.     

电泳法制备的致密氧化锡薄膜及其在高稳定性钙钛矿太阳能电池中的应用

在平面型钙钛矿太阳能电池中常采用SnO₂作为电子传输层材料,相应的SnO₂薄膜常采用溶液旋涂法制备。但是由于前驱液中的纳米颗粒可能会发生部分团聚、基底和溶液难以完全避免灰尘等杂质颗粒混入,且最佳的SnO₂电子传输层的厚度通常仅有约20 nm,所以这种方法制备的电子传输层难以保证严格致密和无纳米针孔。在本工作中,我们报道了一种电泳沉积制备致密SnO₂薄膜的方法,并用其有效地提高了钙钛矿太阳能电池的光电转换效率和工况稳定性。通过电泳法,表面带负电荷的SnO₂纳米颗粒在电场的作用下沉积到氧化铟锡(ITO)阳极表面,这种方法得到的薄膜比旋涂法制备的更为致密。将其应用于n-i-p结构的钙钛矿太阳能电池中,能够使得暗电流降低并抑制载流子的非辐射复合,从而提高电池的短路电流和开路电压,进而实现更高的光电转换效率(从18.17%提高到19.52%),且能消除迟滞效应。更重要的是,长期工况稳定性测试表明基于电泳-旋涂法制备的器件在1个太阳的光照下、最大功率点处连续工作960 h后,仍然能够保持71%的初始效率;然而基于旋涂法制备的器件在工作100 h后即降低到初始效率的70%。本工作提供了一种全新的SnO₂电子传输层的制备方法,显著地提高了器件性能和工况稳定性,后续有望应用于制备大面积器件和电池模组。     

磷矿及磷肥中氧化钙测定方法改进

为了解决磷矿及磷肥中氧化钙酸溶不完全和消除测定过程中磷酸根、镁、铁等的干扰,对磷矿和磷肥中氧化钙的测定方法进行改进.对不同酸溶解体系选择、酸用量、加热时间、干扰掩蔽实验、pH值等条件进行实验,确定采用10 mL王水、3 mL氢氟酸分解试样,加入2 mL盐酸溶解盐类,加入10 mL糊精和5 mL三乙醇胺溶液掩蔽Mg2+、...     

Characterization of a Multi-responsive Magnetic Graphene Oxide Nanocomposite Hydrogel and Its Application for DOX Delivery

Nanocomposite hydrogels are one of the most important types of biomaterials which can be used in many different applications such as drug delivery and tissue engineering.Incorporation of nanoparticles within a hydrogel matrix can provide unique characteristics like remote stimulate and improved mechanical strength.In this study,the synthesis of graphene oxide and graphene oxide nanocomposite hydrogel has been studied.Nanocomposite hydrogel was synthesized using carboxymethyl cellulose as a natural base,acrylic acid as a comonomer,graphene oxide as a filler,ammonium persulfate as an initiator,and iron nanoparticles as a crosslinking agent.The effect of reaction variables such as the iron nanoparticles,graphene oxide,ammonium persulfate,and acrylic acid were examined to achieve a hydrogel with maximum absorbency.Doxorubicin,an anti-cancer chemotherapy drug,was loaded into this hydrogel and its release behaviors were examined in the phosphate buffer solutions with different pH values.The structure of the graphene oxide and the optimized hydrogel were confirmed by Fourier-transform infrared spectroscopy,Raman spectroscopy,X-ray diffraction,scanning electron microscopy,and atomic force microscopy.     

ZIF-8衍生的具有可控氧空位的ZnO对光催化去除NO的增强及毒性NO2形成的抑制

氧化锌作为一种半导体材料,具有合适的能带结构位置,高催化效率,低成本和环境可持续性,因而广泛用于光催化领域.然而,由于氧化锌的宽带隙,可见光吸收能力差以及光生电子-空穴对的快速复合,极大地影响了其光催化效率.通过引入氧空位调控光催化剂的结构被证明是一种可以改善光生载流子的分离,从而提高光催化性能的有效方法.本文以ZIF-8为前驱体,采用两步煅烧法合成了具有不同浓度氧空位分布的ZnO纳米光催化剂,通过X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、X射线光电子能谱(XPS)、电子顺磁共振(EPR)、荧光光谱仪(PL)等手段系统地分析了合成的光催化剂的理化性质,并评价了它们在可见光下光催化氧化去除NO反应性能.EPR结果表明,样品中氧空位的浓度取决于温度处理的过程.通过两步煅烧法得到氧化锌中氧空位的含量高于一步直接煅烧法所得的样品.此外,随着煅烧温度升高,合成的氧化锌晶格越完好,其氧空位含量越少.UV-Vis DRS结果表明,两步煅烧法合成的ZnO与商业的ZnO及一步法直接煅烧合成的ZnO相比,其吸光范围从紫外光拓展到了可见光,表现出了更加优异的吸光性能.光催化反应结果表明,与商业氧化锌和一步直接煅烧法所得样品相比,两步煅烧法合成的样品表现出了更优异的光催化去除NO性能,并抑制了中间产物毒性NO2的产生,促进了NO的深度氧化.具体反应路径为:在光照过程中,光生电子很容易被氧空位俘获,与O2反应产生更多的超氧自由基(·O2^-),从而将NO氧化成最终的产物硝酸盐.尤其有趣的是,先在350 ℃煅烧2小时再400℃煅烧1小时的两步法样品Z 350-400的NO去除效率分别比一步法样品Z 400(400℃煅烧)和商用ZnO高出1.5和4.6倍.这表明以MOF材料衍生的具有适当量氧空位的金属氧化物为一种高效去除NO的光催化剂具有很好的应用前景.     

同构MOFs复合氧化石墨烯电极材料构筑高性能超级电容器

在水热条件下一步自组装合成系列同构X-MOF （X₆O （TATB）₄（H⁺）₂·（H₂O）₈·（DMF）₂,X=Zn、Co、Ni; H₃TATB=4,4'',4″-s-triazine-2,4,6-triyl-tribenzoic acid; DMF=N,N-二甲基甲酰胺）和氧化石墨烯（GO）的复合材料（X-MOF@GO）,并探究其作为超级电容器电极材料的电化学性能。通过X射线粉末衍射、X射线光电子能谱和扫描电子显微镜测试证明GO和MOFs复合成功。其中,性能最优的Ni-MOFs@1.5GO （GO的添加量为1.5 mL）的比电容高达694.8 F·g^-1（0.5 A·g^-1）,约是Ni-MOF的2倍。电化学测试结果表明：复合材料X-MOF@1.0GO较其原MOF表现出更大的比电容和更好的倍率性能。在3.5 A·g^-1的电流密度下,1 000次循环充放电后,Ni-MOFs@1.0GO仍保持初始比电容量的81.2%。与活性炭（AC）组装的非对称超级电容器Ni-MOF@1.5GO//AC的性能最优,其功率密度为754.3 W·kg^-1时,能量密度为15.4 Wh·kg^-1,且循环3 000次后比电容保持率约为70.0%,显示出较长的循环寿命。     

MnWO4/生物质衍生碳纳米复合催化剂的制备及催化性能

通过共沉淀法合成了双金属氧化物MnWO₄镶嵌生物质衍生碳（MnWO₄/BC）纳米复合催化剂,并将其作为对电极（counter electrode,CE）催化剂组装了染料敏化太阳能电池（dye-sensitized solar cell,DSSC）,探究了MnWO₄/BC在非碘体系中的催化性能和光伏性能。结果表明：在铜氧化还原（Cu²⁺/Cu⁺）电对DSSC中获得的光电能量转换效率（power conversion efficiency,PCE）为3.57%（D35）和1.59%（Y123）,高于Pt电极的PCE（3.12%,1.16%）;50次连续循环伏安测试表明,MnWO₄/BC催化剂具有较好的电化学稳定性。     

9,10⁃二(N⁃苯基吲哚⁃3⁃乙烯基)蒽的合成及聚集诱导荧光和压致荧光变色性质

通过简单的Wittig反应合成了一个荧光化合物9,10-二(N-苯基吲哚-3-乙烯基)蒽(IA-Ph); 通过核磁共振和质谱对其结构进行了确认; 利用荧光发射光谱和紫外吸收光谱对其光物理性质进行了表征. 结果表明, 化合物IA-Ph兼具聚集诱导荧光(AIE)和压致荧光变色性质, 在相同浓度下, 该化合物在THF/H₂O(体积比1∶9)混合溶液中的荧光强度比在纯四氢呋喃(THF)溶液中增加了12倍, 具有明显的AIE效应. 通过简单而有效的机械力研磨, 化合物可以从初始的发绿光转变为研磨后的橙红光, 光谱红移约68 nm; 而且在加热或溶剂熏蒸条件下, 化合物的颜色可以回复到起始的绿光, 具有完全可逆性.     

Development of Magnesium Anode-Based Transient Primary Batteries

Biodegradable primary batteries, also known as transient batteries, are essential to realize autonomous biodegradable electronic devices with high performance and advanced functionality. In this work, magnesium, copper, iron, and zinc – metals that exist as trace elements in the human body – were tested as materials for biomedical transient electronic devices. Different full cell combinations of Mg and X (where X = Cu, Fe, and Zn and the anodized form of the metals) with phosphate buffered saline (PBS) as electrolyte were studied. To form the cathodes, metal foils were anodized galvanostatically at a current density of 2.0 mA cm⁻² for 30 mins. Electrochemical measurements were then conducted for each electrode combination to evaluate full cell battery performance. Results showed that the Mg−Cu_anodized chemistry has the highest power density at 0.99 mW/cm². Nominal operating voltages of 1.26 V for the first 0.50 h and 0.63 V for the next 3.7 h were observed for Mg−Cu_anodized which was discharged at a current density of 0.70 mA cm⁻². Among the materials tested, Mg−Cu_anodized exhibited the best discharge performance with an average specific capacity of 2.94 mAh cm⁻², which is comparable to previous reports on transient batteries.