One-pot synthesis of 1, 3-thiazolidin-4-one using Bi(SCH2COOH)3 as catalyst

A catalytic multi-component reaction involving aromatic amine,aromatic aldehydes,mercapto acid as substrates and Bi（SCH₂COOH）₃ as catalyst under solvent free conditions,afforded thiazolidin-4-one in good yields.The efficiency of the catalyst was proved with a variety of substrates,ranging from electrondeficient to electron-rich aldehydes.     

Synthesis, Structure and Photoluminescence of a New Cd(Ⅱ)Coordination Polymer Based on 4-(Carboxymethoxy)-benzoic Acid and 1,10-Phenanthroline Derivative

A new 1D coordination polymer, [Cd2(L1)2(L2)2]·H2O (1, H2L1 = 4-(carboxy-methoxy)benzoic acid and L2 = 2-(4-fluorophenyl)-1H-imidazo[4,5-f][1,10]phenanthroline), has been hydrothermally synthesized and characterized by elemental analysis and single-crystal X-ray diffraction. It crystallizes in triclinic, space group Pī with a = 9.985(5), b = 10.768(5), c = 12.512(5), α = 68.959(5), β = 80.354(5), γ = 79.663(5)°, V = 1227.4(10) 3, Z = 1, C56H36Cd2F2N8O11, Mr = 1259.73, Dc = 1.704 g/cm3, F(000) = 630, μ(MoKa) = 0.949 mm-1, R = 0.0261 and wR = 0.0655. The L1 anions link the neighboring Cd(II) atoms to form a 1D double chain structure. The L2 ligands are alternately located on both sides of the double chains. More interestingly, the lateral L2 ligands from adjacent double chains are paired to furnish strong π-π interactions, yielding a 2D supramolecular layer. N-H···O, O-H···N and O-H···O hydrogen bonds further stabilize the structure of 1. The luminescent property of 1 was studied in solid state at room temperature.     

锂离子电池正极材料LiNi0.5Mn1.5O4金属掺杂的第一性原理研究

近来尖晶石相LiNi0.5Mn1.5O4被认为是一种有前景的二次锂离子电池正极材料.但是其相对较差的循环性能和倍率性能限制了LiNi0.5Mn1.5O4的大规模应用.金属掺杂被认为是一种提高其电化学性能的有效方法.然而,还急需深层次地理解掺杂对材料结构和电化学性质的影响.采用第一性原理方法,系统地研究了金属掺杂的LiM0.125Ni0.375Mn1.5O4(M为Cr,Fe和Co)电极体系的结构与电子性质.计算结果显示,少量的过渡金属M取代LiNi0.5Mn1.5O4晶格中的Ni,能够有效抑制材料在电化学脱嵌锂过程中的体积变化(从锂化相到脱锂相,体积变化率约为4%,而未掺杂的情况为4.7%),提高材料循环性能.体系态密度表明金属掺杂能够减小体系的带隙,进而提高材料的电子传导.另外,通过Li离子的扩散计算,我们发现与未掺杂的LiNi0.5Mn1.5O4相比,Co掺杂使得Li在材料中两条不同扩散路径的扩散能垒分别降低了约90 meV和140 meV,表明Co掺杂有利于Li在材料中的快速扩散.     

两个4-[(8-羟基-5-喹啉)偶氮]苯磺酸配合物的合成、结构及性质研究

以4-[(8-羟基-5-喹啉)偶氮]苯磺酸(H₂L)为配体,采用溶剂热合成法合成了两个配合物[CuL(en)]·0.5H₂O (1)和[CuL₂][Cu(en)₂]·2H₂O (2)(en=乙二胺),并采用单晶X-射线衍射、红外光谱、元素分析、X-射线粉末衍射和热重分析对其进行表征。化合物1和2通过氢键和π…π相互作用连接形成了三维超分子网格。此外,还研究了两个化合物的荧光性质。     

还原氧化石墨烯/碳纳米管/Co_3O_4三元复合材料的制备与电化学性能

将低温水热反应和低温热处理相结合,制备了含还原氧化石墨烯(RGO)、碳纳米管(CNTs)和Co3O4的三元纳米复合材料RGO-CNTs-Co3O4;利用X射线衍射仪、扫描电子显微镜、透射电子显微镜分析了合成产物的相组成和微观结构,分析了其形成过程;并利用电化学测试装置测定了其作为锂离子电池负极材料的电化学性能.结果表明,在合成反应过程中,氧化石墨烯被还原剂肼还原为石墨烯,同时在石墨烯和CNTs表面生成氢氧化钴;再经低温热处理得到RGO-CNTs-Co3O4三元复合材料.Co3O4纳米颗粒均匀分散在由RGO片层和CNTs组成的三维网络结构中;这种三维网络结构既有利于电子和离子的传输,又能够有效抑制Co3O4在脱嵌锂过程中因体积变化引起的结构破坏.总体而言,合成的新型三元复合材料具有高的比容量以及良好的循环性能与倍率性能.     

Ce4+替代Pu4+的模拟固化体(Gd1-xCex)2Zr2O7+x的合成及结构演变

Gd₂Zr₂O₇中Gd具有很大的中子吸收截面, 其烧绿石结构-缺陷萤石结构的转变能较低, 使其成为理想的核废料固化基材. 使用硝酸盐为原料, 添加少量NaF作助熔剂, 在较低温度下(和传统高温固相反应相比), 合成了烧绿石型Gd₂Zr₂O₇. 以Ce⁴⁺模拟Pu⁴⁺, 研究了Gd₂Zr₂O₇对锕系核素的固化, 并合成了系列模拟固化体(Gd_1-xCe_x)₂Zr₂O_7+x (0≤x≤0.6). 采用粉末X射线衍射(XRD)对系列样品进行了表征. 结果表明: 随着x值的增大,样品从烧绿石结构向缺陷萤石结构转变, 且晶胞大小基本保持恒定, 但当x=0.6时, 衍射峰明显宽化, 晶格畸变比较严重, 晶格稳定性降低. 当x=1时, 即用Ce⁴⁺完全取代Gd³⁺进行合成, 不能得到Ce₂Zr₂O₈, 产物发生了相分离, 为四方结构的(Zr_0.88Ce_0.12)O₂和萤石结构的(Ce_0.75Zr_0.25)O₂的混合物. 模拟固化体的浸出率测试表明: 当x≤0.2时, 各元素浸出率均很低, 但当x≥0.4时, 各元素的浸出率明显升高, 说明以Gd₂Zr₂O₇作为固化Pu⁴⁺的基材, Pu⁴⁺掺入量不宜高于40%.     

电化学石英晶体微天平研究高氯酸钠水溶液中活性炭电极的离子存储行为

以电化学石英晶体微天平(EQCM)为主要测试手段,在不同浓度的高氯酸钠(NaClO4)水溶液中研究了水合离子吸附到活性炭电极孔隙过程中电极的质量变化.对于每种电解液,根据Raman光谱和EQCM数据分别计算了本体溶液中和电极/溶液界面上Na+的水合数.通过比对这两组Na+水合数,探讨了Na+存储到活性炭负极过程中的去溶剂化效应.     

双亲聚合物分子印迹自组装胶束电化学传感器研究

结合大分子自组装和分子印迹技术制备了分子印迹聚合物胶束, 并通过电沉积将其固载到电极表面得到分子印迹电化学传感器. 首先以甲基丙烯酸二甲氨基乙酯(DMA)、丙烯酸羟乙酯(HEA)、丙烯酸二异辛酯(EHA)和苯乙烯(St)合成了共聚物poly(DMA-co-HEA-co-EHA-co-St), 在其侧链接枝上双键得到可光交联的双亲共聚物. 以水为沉淀剂诱发该双亲共聚物在含有对乙酰氨基苯酚的溶液中自组装, 得到印迹有对乙酰氨基苯酚的聚合物胶束, 利用动态激光光散射(DLS)和透射电镜(TEM)表征其尺寸和形貌. 最后通过电沉积技术诱导印迹胶束在金电极表面组装, 经紫外光辐照交联后, 洗脱模板分子形成分子印迹膜, 制备了对乙酰氨基苯酚分子印迹传感器, 通过循环伏安法、差分脉冲溶出伏安法研究此印迹传感器的性能. 实验结果表明, 该传感器对对乙酰氨基苯酚具有良好的选择性和灵敏度, 浓度响应线性范围为1×10^{-6 到4×10-3 mol/L, 检测限为3.3×10-7 mol/L.}     

Effect of Precursor Drying Process on the Properties of LiFePO4/C Composite with Low Carbon Content

<正>Properties of two LiFePO_4/C composites with low carbon content synthesized from precursors dried by spray drying and blast drying are investigated by scanning electron microscopy, X-ray diffraction, Raman spectroscopy and electrochemical measurements. The two samples have a different morphology and particle size, while the structure of LiFePO_4 is unaffected. The LiFePO_4/C composite prepared from the precursor dried by blast drying has a much lower surface resistance and a much better rate capability because the deposited carbon is more graphite-like and more conductive. The cycling performance is also much better for the LiFePO_4/C composite prepared from the precursor dried by blast drying because only a slight impedance growth is involved upon cycling. These results suggest that the precursor drying process has a significant impact on the properties of LiFePO_4/C composite, and its effect is highly dependent on the carbon content.