NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

Atomic force microscopy （AFM） has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young＇s modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young＇s modulus distribution image together with reconstructed real topographic image. Then we were able to recognize three regions; rubber matrix, carbon black （or bound rubber） and intermediate regions. Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.     

功能碳黑修饰的丝网印刷碳糊电极葡萄糖生物传感器的特性与机理

从碳黑表面引发苯乙烯磺酸钠的原子转移自由基聚合制备了聚(苯乙烯磺酸钠)改性碳黑(CB-g-PSS),并分别以掺杂和沉积两种不同方式修饰电极的生物敏感膜,再在生物敏感膜上吸附固定葡萄糖氧化酶,制作了两种葡萄糖氧化酶传感器,得到了不同的效果.实验结果表明,将CB-g-PSS与成膜材料掺杂制作的生物传感器与无修饰传感器相比,响应灵敏度下降了1/3;将CB-g-PSS沉积修饰丝网印刷碳糊电极制作的传感器与无修饰传感器相比,响应灵敏度提高了2倍,且对1.1～33.3 mmoL/L的葡萄糖待测样本,RSD均＜7%,稳定性良好,有较高的应用价值.通过实验分析了CB-g-PSS以不同方式修饰电极的工作机理,结果表明,选择正确的修饰方式,能够发挥CB-g-PSS的导电效应及纳米效应,使其有利于酶的固定,提高响应灵敏度并改善酶促反应动力学特性.     

壳聚糖/乙炔黑修饰电极上萘酚异构体的电化学行为及同时测定

制备了壳聚糖/乙炔黑复合修饰电极(CS-AB/GCE),采用SEM和交流阻抗法对其进行表征。并利用循环伏安法(CV)研究了萘酚异构体(α-N和β-N)在该修饰电极上的电化学行为,对实验条件进行了优化。结果表明,在p H 7.0的PBS缓冲液中,α-N和β-N在该修饰电极上均出现一不可逆氧化峰,且在20~200m V/s范围内,其峰电流与扫速呈线性关系,表明电极过程是受吸附控制的不可逆过程。计算了电极过程的部分动力学参数,优化了差分脉冲伏安法(DPV)的实验参数,并对α-N和β-N进行同时测定,发现二者的微分氧化峰电流值与其浓度在2.5×10-6~1.0×10-4mol/L范围内呈良好的线性关系(rα-N=0.996;rβ-N=0.998)。α-N和β-N的检出限(S/N=3)分别为3.4×10-7mol/L和2.4×10-7mol/L。采用该法对实际水样进行检测,得到α-N和β-N的加标回收率分别为96.7%~105.1%和98.8%~103.9%。     

改性炭黑-LaMnO3复合材料的制备及其共价复合效应对氧还原性能的影响

以VulcanXC-72炭黑为载体,通过对炭载体石墨化处理和表面化学修饰,将其与化学沉淀法制备的纳米级LaMnO₃颗粒共混,再经特定温度下煅烧,制备出改性炭黑-LaMnO₃复合材料.X射线光电子能谱和热重分析表明,当煅烧温度在300℃时,炭载体与LaMnO₃纳米颗粒之间形成了大量C-O-M（M=La,Mn）化学键.扫描电子显微镜和高分辨透射电子显微镜分析发现,纯相LaMnO₃纳米颗粒主要呈现短棒、三支棒或竹节棒的形貌特征,炭载体则为具有完整石墨层的空心球结构,LaMnO₃均匀分散在炭载体上.在25℃,1mol/LNaOH溶液中的电化学测试结果表明,成分比（LaMnO₃：C）为2：3的复合材料具有很高的氧还原电催化活性,氧还原反应电子数为3.81,中间产物H₂O₂产率为9.5%,其活性接近商业Pt/C催化剂（E-TEK）.高的氧还原电催化活性主要归因于LaMnO₃纳米颗粒与炭载体之间形成了大量共价键.     

PICVib: An accurate,fast, and simple procedure to investigate selected vibrational modes at high theoretical levels

A new approach Procedure for Investigating Categories of Vibrations (PICVib) for estimating vibrational frequencies of selected modes using only the structure and energy calculations at a more demanding computational level is presented and explored. The PICVib has an excellent performance at only a small fraction of the computational demand required for a complete analytical calculation. The errors are smaller than ca. 0.5% when DFT functionals are combined with high level ab initio methods. The approach is general because it can use any quantum chemical program and electronic structure method. It is very robust because it was validated for a wide range of frequency values (ca. 20–4800 cm^–1) and systems: XH₃ (D_3h) with X = B, Al, Ga, N, P, As, O, S, and Se, YH₄ (D_4h) with Y = C, Si, and Ge, conformers of RDX, S_N2 and E2 reactions, [W(dppe)₂(NNC₅H₁₀)] complex, carbon nanotubes, and hydrogen‐bonded complexes including guanine‐cytosine pair. © 2012 Wiley Periodicals, Inc.     

含氟体系中高性能T型分子筛膜的合成

含氟体系中,在负载晶种的大孔莫来石支撑体表面快速合成了高性能且取向生长的T型分子筛膜。采用XRD、SEM和MASNMR等手段对分子筛膜层和粉末进行表征。讨论了添加物、氟硅比、合成温度和合成时间等条件对膜生长与分离性能的影响,并阐述了含氟体系中T型分子筛膜快速晶化的机理。碱金属氟盐的加入促进了T型分子筛晶体层的晶化速率,并对晶体层形貌产生了一定的影响。膜应用于75℃、水/异丙醇（10：90,w/w）体系的平均渗透通量和分离因子分别为（4.91±0.18）kg·m^-2·h^-1和7060±1130。     

亚临界水萃取及气相色谱-串联质谱法检测红茶中多种农药残留

建立了亚临界水萃取及气相色谱-串联质谱(GC-MS/MS)检测红茶中21种有机氯和拟除虫菊酯农药残留的方法。在萃取压力为5 MPa条件下,样品经150 ℃的亚临界水提取15 min后,将目标物转移至丙酮-正己烷(1:1, v/v)中,经ENVI-Carb固相萃取净化小柱净化,DB-5毛细管气相色谱柱分离,在多反应监测(MRM)模式下进行MS/MS检测,基质匹配溶液内标法定量。各目标物在5.0～320.0 μg/L范围内线性关系良好,相关系数均大于0.99,其定量限(信噪比(S/N)＞10)为50 ng/g,检出限(S/N＞3)为10 ng/g。茶叶基质中添加50、100和200 ng/g的标准品时,21种农药的回收率为70.18%～119.98%,相对标准偏差(RSD)为5.01%～11.76%。该方法的灵敏度、准确度和精密度均符合农药残留测定的技术要求,适用于红茶中有机氯和拟除虫菊酯农药残留的检测。     

壳聚糖修饰炭黑负载Pt-Au催化剂对甲醇氧化的电催化性能

以炭黑及自制的壳聚糖-炭黑(CHI-C)复合材料为载体,采用溶胶负载法制备了Pt_m＾Au/C及Pt_m＾Au/CHI-C催化剂(＾ 代表Au、Pt为分步负载,m代表Pt/Au原子比),通过紫外-可见吸收光谱、X射线衍射、透射电镜及X射线光电子能谱对催化剂进行了表征。利用循环伏安法和计时电流法分别测定了Pt-Au催化剂对甲醇电催化氧化反应的活性和稳定性,考查了Pt/Au原子比及CHI改性对电催化活性和稳定性的影响。结果表明,Pt_1.0＾Au/C具有最高的催化活性,炭黑中加入少量CHI能提高Pt_1.0＾Au/C催化剂的稳定性。     

碳纳米微粒的共振散射光谱研究

液相碳纳米微粒的共振散射光谱实验表明,当碳浓度小于360mg/L时,它在400、470、510和940nm产生4个共振散射峰;浓度大于900mg/L时无共振散射、碳微粒浓度在0．45－45mg/L范围内与共振散射光强度I470nm成良好的性关系,研究了光源和扫描速度对液相碳纳米微粒共振散射光谱的影响。结果表明,光源的发射强度分布不一是产生共振散射光谱峰的一个重要因素,并结合已有的实验结果提出了界面共振吸收和黑白纳米微粒共振散射概念,解释了碳纳米微粒体系的共振散射光谱。     

Topochemical Synthesis of Two‐Dimensional Transition‐Metal Phosphides Using Phosphorene Templates

Transition‐metal phosphides (TMPs) have emerged as a fascinating class of narrow‐gap semiconductors and electrocatalysts. However, they are intrinsic nonlayered materials that cannot be delaminated into two‐dimensional (2D) sheets. Here, we demonstrate a general bottom‐up topochemical strategy to synthesize a series of 2D TMPs (e.g. Co₂P, Ni₁₂P₅, and Co_xFe_2?xP) by using phosphorene sheets as the phosphorus precursors and 2D templates. Notably, 2D Co₂P is a p‐type semiconductor, with a hole mobility of 20.8 cm² V^?1 s^?1 at 300 K in field‐effect transistors. It also behaves as a promising electrocatalyst for the oxygen evolution reaction (OER), thanks to the charge‐transport modulation and improved surface exposure. In particular, iron‐doped Co₂P (i.e. Co_1.5Fe_0.5P) delivers a low overpotential of only 278 mV at a current density of 10 mA cm^?2 that outperforms the commercial Ir/C benchmark (304 mV).