A Non‐Enzymatic Hydrogen Peroxide Sensor Based on Gold Nanoparticles/Carbon Nanotube/Self‐Doped Polyaniline Hollow Spheres

In this study, a novel non‐enzymatic hydrogen peroxide (H₂O₂) sensor was fabricated based on gold nanoparticles/carbon nanotube/self‐doped polyaniline (AuNPs/CNTs/SPAN) hollow spheres modified glassy carbon electrode (GCE). SPAN was in‐site polymerized on the surface of SiO₂ template, then AuNPs and CNTs were decorated by electrostatic absorption via poly(diallyldimethylammonium chloride). After the SiO₂ cores were removed, hollow AuNPs/CNTs/SPAN spheres were obtained and characterized by transmission electron microscopy (TEM), field‐emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FTIR). The electrochemical catalytic performance of the hollow AuNPs/CNTs/SPAN/GCE for H₂O₂ detection was evaluated by cyclic voltammetry (CV) and chronoamperometry. Using chronoamperometric method at a constant potential of ?0.1 V (vs. SCE), the H₂O₂ sensor displays two linear ranges: one from 5 µM to 0.225 mM with a sensitivity of 499.82 µA mM^?1 cm^?2; another from 0.225 mM to 8.825 mM with a sensitivity of 152.29 µA mM^?1 cm^?2. The detection limit was estimated as 0.4 µM (signal‐to‐noise ratio of 3). The hollow AuNPs/CNTs/SPAN/GCE also demonstrated excellent stability and selectivity against interferences from other electroactive species. The sensor was further applied to determine H₂O₂ in disinfectant real samples.     

Tuning of NaTaO_3 Band Structure through Mn~（2＋） Ion Doping and the Enhanced Visible Light Response

Pure and Mn-doped NaTaO3 nanoparticles were synthesized by a simple hydro- thermal method. XRD and XPS results suggested that manganese ions were successfully doped into the NaTaO3 crystalline in Mn2＋ state. UV-vis diffuse reflectance spectra revealed the obvious red-shift in the series of manganese doped NaTaO3 nanoparticles, resulting in a decrease in the band gap of NaTaO3 with the increase of Mn2＋ doping concentration. The photo-degradation experiment indicated that manganese doped NaTaO3 showed good photocatalytic performance and methylene blue（MB） degradation is improved with lower doping concentration of manganese ions under visible light. The simulation of energy band structure by density functional theory unfolded that the substitution of Ta5＋ ions by Mn2＋ ions resulted in an intermediate band（IB） below the bottom of the conduction band（CB）, which was mainly attributed to the state of Mn 3d.     

Enhanced photocatalytic activity of Ni doped TiO2 nanowire–nanoparticle hetero–structured films prepared by hydrothermal and sol–gel methods

TiO₂ nanowire-nanoparticle hetero-structured films were prepared via a sol–gel method and coated on glass substrates by dipping method for photocatalytic activity. In this study 0, 1, 3, and 5 mol% of Ni doped were studied. One-dimensional TiO₂ nanowires (NWs) were prepared by hydrothermal treatment with TiO₂ nanoparticles (NPs) which are commercially available. XRD, FESEM, DRS, and XPS were used to characterize the prepared nanowire-nanoparticle hetero-structures films. 3%Ni doped TiO₂ hetero-structured film (TNi3) had the highest photocatalytic activity on the degradation of methylene blue (MB). TNi3 films provided about 4.3 times of degradation rate compared to undoped TiO₂ (T). It revealed that TNi3 film resulted in shifting the absorption wavelength towards narrowing the energy band gap and small crystallite size. Therefore, the TNi3 film exhibited a photocatalytic activity on the degradation of MB under visible light irradiation greater than undoped film.     

Structural,thermal, optical and conductivity studies of Co/ZnO nanoparticles doped CMC polymer for solid state battery applications

In this study, a simple chemical precipitation method was used to synthesize ZnO: Co²⁺ as nanoparticles. The solution casting technique was used for the preparation of polymer films of Carboxymethyl cellulose (CMC) doped with different contents (0.5, 1.5, 3, and 5 wt%) of ZnO/Co NPs. As shown by the X-ray diffraction, the average size of ZnO/Co crystallite of the NPs is 25.6 nm. Meanwhile, the addition of ZnO/Co reduced the semi-crystallinity of CMC. The Fourier transform infrared (FTIR) confirmed the interaction between the ZnO/Co NPs and the polymer CMC. The direct and indirect band gap (Eg) was reduced from (5.32–5.01 eV and 5.20 to 4.99 eV respectively) with the increase in ZnO/Co NPs content up to 3 wt% after this content the Eg is increased as shown by the UV–Vis spectra. In addition, the results of TGA displayed the decomposition of the nanocomposite to be little compared to that of the pure CMC indicating the success of fabrication of products. The improvement of the ionic conductivity was noticed upon the addition of ZnO/Co NPs into the polymer CMC system which can be explained in terms of an increase in amorphicity as shown by the impedance spectroscopic study. It was found that the optimum ionic conductivity (3.209 × 10⁻⁶ Scm⁻¹) at ambient temperature was higher for the sample containing 1.5 wt% ZnO/Co NPs with highest of amorphicity and the lowest total loss of weight. Therefore, the improvements in optical properties, thermal stability, and AC conductivity which were observed represent a strong support for the use of the nanocomposite films in the solid state battery applications.     

Excitation‐Dependent Long‐Life Luminescent Polymeric Systems under Ambient Conditions

Organic room temperature luminescent materials present a unique phosphorescence emission with a long lifetime. However, many of these materials only emit single blue or green color in spite of external stimulation, and their color tunability is limited. Herein, we report a rational design to extend the emission color range from blue to red by controlling the doping of simple pyrene derivatives into a robust polymer matrix. The integration of these pyrene molecules into the polymer films enhances the intersystem crossing pathway, decreases the first triplet level of the system, and ensures the films show a sensitive response to excitation energy, finally yielding excitation‐dependent long‐life luminescent polymeric systems under ambient conditions. These materials were used to construct anti‐counterfeiting patterns with multicolor interconversion, presenting a promising application potential in the field of information security.     

Understanding the Origin of Highly Selective CO2 Electroreduction to CO on Ni,N‐doped Carbon Catalysts

Ni,N‐doped carbon catalysts have shown promising catalytic performance for CO₂ electroreduction (CO₂R) to CO; this activity has often been attributed to the presence of nitrogen‐coordinated, single Ni atom active sites. However, experimentally confirming Ni?N bonding and correlating CO₂ reduction (CO₂R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile‐derived Ni,N‐doped carbon electrocatalysts (Ni‐PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO₂R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X‐ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square‐planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.     

Promotion of oxidative desulfurization performance of model fuel by 3DOM Ce-doped HPW/TiO2 material

Phosphotungstic acid (HPW) supported on Ce-doped three-dimensional ordered macroporous (3DOM) TiO₂ catalysts are studied in catalytic oxidation desulfurization (ODS) of model oil. The structural and textural of as-synthesized catalysts are characterized by N₂ adsorption, XRD, Raman spectroscopy, SEM-EDS, TEM, FT-IR, XPS, UV–Vis and ICP. These results upheld the existence of periodically arranged macroporous structure of catalyst, with Keggin-type of HPW dispersed homogeneously on TiO₂ matrix. Among these 3DOM Ce-doped HPW/TiO₂ materials, catalyst with 15 wt.% cerium dosage exhibits best ODS performance, which oxidized 99.8% of dibenzothiophene (DBT) into corresponding sulfone within 40 min. The excellent ODS performance of 3DOM Ce-doped HPW/TiO₂ catalyst is related to the common influence of more oxygen vacancies produced by electron transformation between Ce³⁺ and Ce⁴⁺. The chemisorbed oxygen on the surface catalyst will facilitate the selective oxidation of sulfides to sulfones. Moreover, the 3DOM structure of catalyst will further promote the mass transfer of reactants and products on the pore channel. The as-prepared catalyst shows excellent reusability in the ODS system, no obviously decrease in catalytic activity even after 6 runs.     

具有高机械强度的掺Er3+∶TeO2-Nb2O5玻璃的光谱性质研究

熔制了掺铒碲铌玻璃样品(100-XTeO2-XNb2O5(X=5,10,15,20 mol%),测试了其密度、折射率、转变温度、析晶温度、维氏机械强度、吸收光谱、荧光光谱、荧光寿命等参量。利用Judd-Ofelt和McCumber理论分别计算了铒离子强度参量Ωt (t=2, 4, 6)和受激发射截面σemi的大小,研究了掺铒碲铌玻璃样品光谱参量对Nb2O5成分的依赖性,并与典型的碲锌钠玻璃（75TeO2-20ZnO-5Na2O）在热学、机械强度、光谱性质和放大品行四个方面进行了比较.     

低泵浦功率的遥泵放大在超长跨距密集波分复用系统中的应用

针对长跨距密集波分复用系统中喇曼放大入纤泵浦功率过大的问题,将遥泵放大器（RP-EDFA）引入到系统中,通过对共纤RP-EDFA的噪音性能及其优化设计的研究,在理论上计算比较了RP-EDFA系统和后向喇曼放大系统在不同泵浦功率水平下的光信噪比和非线性相移,表明遥泵放大技术有效降低了入纤泵浦的功率水平,更适合长跨距应用.运用遥泵放大技术,对一个典型的长跨距系统进行系统Q值的模拟,结果表明：在 220 mW泵浦功率水平下可以实现跨距为 167 km的40×11.6 Gbit/s系统1000 km传输,Q值裕量4.4 dB.     

Li原子掺杂C28单分子器件的热自旋输运性质

利用第一性原理对Li原子掺杂C₂₈的分子器件的热自旋输运性质进行了计算。在不同的温度场下,上下自旋分别为Li原子掺杂C₂₈的分子器件中的空穴和电子提供了输运通道,在MJ₁和MJ₃分子器件中,热自旋电流随着温度增加而增大,但在MJ₂分子器件中,热自旋电流先增大再减小。三种分子器件都出现了自旋塞贝克效应,MJ₂还出现了负微分电阻现象,利用费米-狄拉克分布和自旋输运谱对其物理机理进行了解释。根据Li掺杂C₂₈的单分子器件的热自旋输运性质,可设计新的自旋纳米器件。