Ultrasonic investigation of amorphous carbon in various frequencies at low temperatures from 2.1 to 300 K

Using pulse echo overlap measurement, the elastic behavior of amorphous carbon has been studied at ambient and low temperatures. The smaller ratio B/G of the bulk modulus to shear modulus and smaller Poisson's ratio σ at room temperature indicate that there is an intrinsic stiffening of transverse acoustic phonons in the amorphous carbon. The acoustic velocity and attenuation for longitudinal modes have been measured between 2.1 and 300 K at three frequencies of 7, 21 and 35 MHz, respectively. Their frequency and temperature dependence are observed. The elastic constant C₁₁ increases with decreasing temperature and show enhanced stiffening at low temperatures. In the 130-220 K region, the abnormal change and effect of longitudinal velocity and attenuation with temperature and frequency, and a phase transition associated with structure relaxations are discussed.     

Structure induced by irradiation of femtosecond laser pulse in dyed polymeric materials

We investigated the structures induced by an irradiation of a near‐infrared (NIR) femtosecond laser pulse in dye‐doped polymeric materials {poly(methyl methacrylate) (PMMA), thermoplastic epoxy resin (Epoxy), and a block copolymer of methyl methacrylate and ethyl acrylate‐butyl acrylate [p(MMA/EA‐BA) block copolymer]}. Dyes used were classified into two types—type 1 with absorption at 400 nm and type 2 with no absorption at 400 nm. The 400‐nm wavelength corresponds to the two‐photon absorption region by the irradiated NIR laser pulse at 800 nm. Type 1 dye‐doped PMMA and p(MMA/EA‐BA) block copolymer showed a peculiar dye additive effect for the structures induced by the line irradiation of a NIR femtosecond laser pulse. On the contrary, dye‐doped Epoxy did not exhibit a dye additive effect. The different results among PMMA, p(MMA/EA‐BA) block copolymer, and Epoxy matrix polymers are supposed to be related to the difference of electron‐acceptor properties. The mechanism of this type 1 dye‐additive‐effect phenomenon for PMMA and p(MMA/EA‐BA) block copolymer is discussed on the basis of two‐photon absorption of type 1 dye at 400 nm by the irradiation of a femtosecond laser pulse with 800 nm wavelength and the dissipation of the absorbed energy to the polymer matrix among various transition processes. Dyes with a low‐fluorescence quantum yield favored the formation of thicker grating structures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2800–2806, 2002     

Effect of Ga doping on magneto-transport properties in colossal magnetoresistive La0.7Ca0.3Mn1−xGaxO3 (0<x<0.1)

Samples of La_0.7Ca_0.3Mn_1−xGa_xO₃ with x=0, 0.025, 0.05 and 0.10 were prepared by standard solid-state reaction. They were first characterized chemically, including the microstructure. The magnetic properties and various transport properties, i.e. the electrical resistivity, magnetoresistivity (for a field below 8 T), thermoelectric power and thermal conductivity measured each time on the same sample, are reported. The markedly different behaviour of the x=0.1 sample from those with a smaller Ga content, is discussed. The dilution of the Mn³⁺/Mn⁴⁺ interactions with Ga doping considerably reduces the ferromagnetic double exchange interaction within the manganese lattice leading to a decrease of the Curie temperature. The polaron binding energy varies from 224 to 243 meV with increased Ga doping.     

Flicker noise in degenerately doped Si single crystals near the metal-insulator transition

In this paper we report some of the important results of experimental investigations of the flicker noise near the metal-insulator (MI) transition in doped silicon single crystals. This is the first comprehensive work to study low-frequency noise in heavily doped Si over an extensive temperature range (2 K<T<500 K). The measurements of conductance fluctuations (flicker noise) were carried out in the frequency range 10⁻²<f<4 × 10¹ Hz in single crystalline Si across the MI transition by doping with phosphorous and boron. The magnitude of noise in heavily doped Si is much larger than that seen in lightly doped Si over the whole temperature range. The extensive temperature range covered allowed us to detect two distinct noise mechanisms. At low temperatures (T<100 K) universal conductance fluctuations (UCF) dominate and the spectral dependence of the noise is determined by dephasing the electron from defects with two-levels (TLS). At higher temperatures (T>200 K) the noise arises from activated defect dynamics. As the MI transition is approached, the 1/f spectral power, typical of the metallic regime, gets modified by the presence of discrete Lorentzians which arise from generation-recombination process which is the characteristic of a semiconductor.     

氟氧化物陶瓷的多谱线上转换发光

以氧化硅、氟化铅为基质制备了Er3 :Yb3 共掺杂氟氧化物陶瓷 ,X 射线分析表明陶瓷中存在着 β PbF2 晶相 ,沉积在其中的稀土离子由于具有很低的无辐射跃迁几率而显示出良好的上转换性能。Er3 ,Yb3 离子之间存在的多种能量传递通道 ,导致稀土离子十分丰富的上转换谱线的出现。     

Influence of Temperature and Time on the Stability of Silver in Silica Sol-Gel Glasses

The darkening of silica sol-gel glasses doped with 0.05 mol% silver was studied. Six sols were prepared from TEOS and silver nitrate. Different additives were used, to influence the chemical and physical states of silver: oxidizing or reducing agents (H₂O₂, As₂O₅), colloid stabilizer (sodium citrate) and network modifiers (Li₂O, CaO). Sols were gelified at 60°C and densified at 600°C. The samples without additives and those prepared with H₂O₂ at room temperature even if they were protected from light. With increased temperature, the darkening became samples were heated above, 400°C, reversible bleaching took place. This darkening-bleaching is of thermal nature (“thermochromic effect”) and seems to be determined by a reversible aggregation-disaggregation of tiny silver particles. The presence of sodium citrate, as an additive delayed the darkening effect and the presence of CaO delayed it even further. Lithium oxide inhibited it totally.     

铒离子及其阳离子卟啉配合物对金黄色葡萄球菌生长的抑制和刺激作用

用微量热法研究了Er³⁺、TMP{TMP=5，10，15，20-四(4-甲氧基苯基)卟啉}及其阳离子铒卟啉配合物[Er(TMP)(H₂O)₃]Cl对金黄色葡萄球菌生长作用的生物热动力学特征，求算了在Er³⁺、TMP和[Er(TMP)(H₂O)₃]Cl作用下，金黄色葡萄球菌生长的热动力学参数。实验结果表明：TMP对金黄色葡萄球菌生长的作用表现为单向的抑制作用，而Er³⁺和[Er(TMP)(H₂O)₃]Cl对金黄色葡萄球菌的生长有双向调节作用。在低浓度下，Er³⁺对金黄色葡萄球菌生长的刺激作用强于[Er(TMP)(H₂O)₃]Cl；在较高浓度下，[Er(TMP)(H₂O)₃]Cl对金黄色葡萄球菌生长的抑制作用显著强于Er³⁺。对金黄色葡萄球菌的抗菌活性为：[Er(TMP)(H₂O)₃]Cl>>TMP>Er³⁺。对相互作用机理做了初步探讨。     

掺铒a-SixC1-x-H薄膜的发光特性

用等离子体增强化学气相沉积（PECVD）的方法，以固定的氢气（H2）流量和不同的硅烷（SiH4）和甲烷（CH4）流量比沉积了一系列的氢化非晶SiC（a-Si，C1-x-H）膜。用这种宽带隙的a-SixC1-x-H材料作为掺铒的基体材料，通过离子注入的方法得到掺铒的a-SixC1-x-H（a-SixC1-x-H：Er）膜。注入以后的样品经过不同温度的退火。用X射线光电子能谱（XPS）、红外吸收光谱（IR）、拉曼散射谱（Raman）等技术研究不同的SiH4／CH4流量比和退火温度对a-SixC1-x-H：Er发光强度的影响。结果表明，高温退火引起了膜中C的分凝，对饵的发光是不利的。通过低温和室温下铒发光强度的比较，表明这种材料具有较弱的温度猝灭效应。     

Anodic Stripping Voltammetry of Heavy Metals at Nanocrystalline Boron‐Doped Diamond Electrode

Boron‐doped Diamond (BDD) electrode has become one of the important tools for heavy metal detection. By studying some analytical parameters of DPASV method, like deposition time and potential in different electrolyte concentrations (acetate buffer), the conditions for detecting very low metal ion levels (Zn, Cd, Pb, and Cu) could be chosen. Diluted electrolyte (0.01 M buffer) was one of the factors favoring low detection and quantification limits, but its quantification range is short in comparison to more concentrated media. For ?1.7 V deposition potential, the detection of single metal at ppb levels was reached in 60 s deposition time. Understanding different metal‐metal interactions shows the limits to the simultaneous determination of heavy metals at BDD. Quantification was possible for the simultaneous determination of Zn, Cd and Pb despite the overlapping of Zn and Cd peaks. The performance of the BDD was compared with that of another C‐based solid electrode: the glassy carbon electrode (without mercury plating). A lower base line current, wider potential range, higher sensitivity (3 to 5 times higher than GC) and longevity of the material were noticed for the BDD.     

CATALYTIC BEHAVIOR OF DOPED MTiO_3 CATALYSTS FOR OXIDATIVE DEHYDROGENATION OF ETHANE

用Ｌｉ＋部分替代ＭＴｉＯ３（Ｍ＝Ｃａ、Ｓｒ）催化剂中的Ｔｉ４＋，明显地提高了乙烷氧化脱氢（ＯＤＨＥ）反应中乙烯的选择性。在ＣａＴｉ０．９Ｌｉ０．１Ｏ３－δ催化剂上，反应温度为８５０℃时，乙烯选择性为７７．４％，乙烷转化率为８１．７％。Ｌｉ掺杂的作用是增加了催化剂的Ｐ型半导性和未充分还原的氧物种数目。