This work describes the sequential determination of amlodipine (AML) and atenolol (ATN) by batch injection analysis (BIA) with pulsed amperometric detection (BIA‐PAD). Boron doped diamond (BDD) was used as working electrode. AML was detected at +1.00 V and ATN at +1.65 V. The proposed BIA method is simple, robust, precise (RSD <3.2 %; n=10), presents high analytical frequency (>70 injections h?1), generates reduced volume of waste (without use of organic solvent) and requires minimal sample manipulation (dissolution and dilution in electrolyte). The limits of detection were 0.074 and 0.073 µmol L?1 for AML and ATN, respectively. The results obtained with the proposed BIA method were compared to those obtained by HPLC and similar results were obtained (at 95% of confidence level). 相似文献
Introduction3- ( 1 - Cyclohexenyl) - 2 - butanone( CHB) is oneofthe importantchemicals and has a potential valuein perfume industry.Beak et al.[1] reported thatthe acylation of ethylidenecyclohexane( EDC) withzinc chloride as a catalystgave3- ( 1 - cyclohexenyl) -2 - butanone in a good yield,butthey have notmadea more detailed investigation.The use of such aconventional catalyst as zinc chloride leads to anumber of problems such as corrosion,unclean re-action products and the disposal of pot… 相似文献
Preparation of racemic and enantiomerically enriched α-trifluoromethyl lactic acid amide [NHPh, NH(4-Cl-C6H5), NHBn, NHt-Bu] derivatives have been developed. Ph, 4-Cl-C6H5, and tert-Bu derivatives were found to have substantial magnitude of the self-disproportionation of enantiomers (SDE) via sublimation. For example, when the optically enriched Ph, 4-Cl-C6H5, and tert-Bu amide derivatives were subjected to sublimation under kinetic conditions (Petri dish in open air), the enantiomeric excess of the remainder has noticeably increased. On the other hand, the SDE of Bn amide derivative by sublimation resulted in almost no change in the optical purity of the remainder. These preliminary results on the SDE of the compounds under study, as well as their excellent chemical and physico-chemical characteristics, render these amide derivatives as readily available and very promising substrates for systematic study of SDE via sublimation. 相似文献
Different techniques are being developed for fabricating microcapsules; it is still a challenge to fabricate them in an efficient and environment‐friendly process. Here, a one‐step green route to synthesize silk protein sericin‐based microcapsules without any assistance of organic solvents is reported. By carefully changing the concentration of calcium ions accompanied with stirring, the morphology of the microcapsules can easily be regulated to form either discoidal, biconcave, cocoon‐like, or tubular structures. The chelation of Ca2+ and shearing force from agitation may induce the conformational transformation of sericin, which possibly results in the formation of microcapsules through the self‐assembly of the protein subsequently. The as‐prepared cocoon‐like microcapsules exhibit pH‐dependent stability. A potential application of microcapsules being fabricated from natural water‐soluble silk protein sericin for controlled bioactive molecules loading and release system by a pH‐triggered manner is quite feasible.
A thorough study concerning O-alkylation and α-bromination of dihydroxyacetophenone (DA) and N-alkylation of 1,2-diazine, under ultrasound (US) and microwave (MW) irradiation as well as under conventional thermal heating (TH) is presented. Under US and MW irradiation the yields are higher, the amount of used solvent decreases substantially, the reaction time decreases considerable (from hours or days to minutes) and the consumed energy decreases, consequently the O-alkylation, α-bromination and N-alkylation methods could be considered environmentally friendly. A selective and efficient way to either bis-O-alkylation or mono-O-alkylation of DA has been found, the relative position of the two hydroxyl groups on the phenyl moiety being compulsory. A selective and efficient way for α-bromination in heterogeneous catalysis of DA derivatives under US irradiation is presented. The N-alkylation reaction of DA under US and MW irradiation proved to be the most convenient setup procedure for these types of reactions. Overall, the use of US proved to be more efficient than MW or TH. 相似文献
The presented results convincingly demonstrate that self-disproportionation of enantiomers via sublimation is substantially more complex phenomenon then was previously believed. We demonstrate that the racemic form of isopropyl 3,3,3-trifluoro-2-hydroxypropanoate (1) sublimed faster regardless of the starting enantiomeric composition of the enantiomerically enriched mixtures studied in the range from 20.8, 36.8, 58.7 to 79.4% ee. This preferential sublimation of the racemic form allowed for, the most possibly simple, preparation of optically pure samples of compound 1. In this work we also suggest some general experimental procedures, which may be easily used to facilitate the interpretation of the data collected in different laboratories. 相似文献
A simple sol‐gel method with and without surfactant was applied to prepare TiO2‐ZrO2 mixed oxides containing Ti and Zr at a molar ratio of 1:1. Several catalysts containing w=15% –35% H3PO4 were set up using these mixed oxides. The physical and chemical properties of catalysts were investigated by BET, SEM and pyridine adsorption‐desorption. The catalytic performance of each material was determined for the vapor‐phase acylation of veratrole (1,2‐dimethoxybenzene) to 3,4‐dimethoxyacetophenone (3,4‐DMAP), which was found to be the major product of the reaction of veratrole with ethyl acetate, with alkylated products being the minor products. 2,3‐Dimethoxyacetophenone (2,3‐DMAP) was not detected in the product stream. In the best experimental conditions, the alkylated products were less than 0.7%. This reaction may represent an environmentally friendly alternative to use the ethyl acetate as the acylating reagent. The feed molar ratios of veratrole/ethyl acetate were varied over a wide range of 0.1 to 1, and the optimum feed ratio of veratrole/ethyl acetate was 1:3. Space velocity employed in the veratrole acylation reported as WHSV (veratrole) was 1.2 h?1. The acylation reactions were carried out in the temperature range of 423 to 673 K and the optimum H3PO4 content for acylation was w=15%. 相似文献
For the first time, sillica‐supported sulfuric acid has been used as a heterogeneous, reusable and efficient catalyst at room temperature to give the corresponding dipyrromethanes in a very short reaction time. The new reaction procedure is simple and solvent is not required. 相似文献
Sugar-assisted stable monometallic nanoparticles were synthesized by wet chemical method following a general scheme. Judicious manipulation of the reducing capabilities of different sugars has shown to have a bearing on the particle size that corroborates the shift of the absorbance peak positions and TEM analysis. Evaporation of the precursor solutions on the solid surface (strong metal--support interaction), led to the formation of smaller particles. Under the experimental condition, spherical nanoparticles of approximately 1, 3, 10 and 20 nm sizes were prepared reproducibly for gold, platinum, silver and palladium, respectively. Fructose has been found to be the best suited sugar for the synthesis of smaller particles and remained stable for months together. 相似文献
Several plants that are rich in polyphenolic compounds and exhibit biological properties are grown in the desert region of Mexico under extreme climate conditions. These compounds have been recovered by classic methodologies in these plants using organic solvents. However, little information is available regarding the use of alternative extraction technologies, such as ultrasound. In this paper, ultrasound-assisted extraction (UAE) parameters, such as the liquid:solid ratio, solvent concentration and extraction time, were studied using response surface methodology (RSM) for the extraction of polyphenols from desert plants including Jatrophadioica,Flourensiacernua, Turneradiffusa and Eucalyptuscamaldulensis. Key process variables (i.e., liquid:solid ratio and ethanol concentration) exert the greatest influence on the extraction of all of the phenolic compounds (TPC) in the studied plants. The best conditions for the extraction of TPC involved an extraction time of 40 min, an ethanol concentration of 35% and a liquid:solid ratio ranging from 8 to 12 ml g−1 depending on the plant. The highest antioxidant activity was obtained in the E. camaldulensis extracts. The results indicated the ability of UAE to obtain polyphenolic antioxidant preparations from desert plants. 相似文献