The role of various binding materials for trace elemental analysis of powder samples using laser-induced breakdown spectroscopy

Study of various binding materials like potassium bromide, poly(vinyl alcohol), starch, silver and aluminum has been carried out using laser-induced breakdown spectroscopy (LIBS). The role of matrix effects using these five binders on LIBS signal intensity was investigated for better performance of LIBS technique as a quantitative analytical tool. For comparative study of different binders, the signal intensity of different Mg lines at 518.3, 517.2, 383.8 and 279.5 nm wavelengths were recorded for pellets prepared with known concentrations of Mg in these binders. The influence of laser energy on ablated mass under different binding materials and its correlation with LIBS signal intensity has been explored. Optical scanning microscopy images of the ablated crater were studied to understand the laser ablation process. The study revealed that the binding material plays an important role in the generation of LIBS signal. The relative signal intensity measured for a standard Mg line (at 518.3 nm) were 735, 538, 387, 227 and 130 for potassium bromide, starch, poly(vinyl alcohol), silver and aluminum as binders, respectively. This indicates clearly that potassium bromide is better as a binder for LIBS studies of powder samples.     

Mechanical properties of SBR-networks: I. Determination of crosslink densities by stress-strain-measurements

The tube model is applied for the treatment of stress-strain measurements on SBR networks. It is shown that this theory allows the separation of crosslink and constraint contributions to the stress-strain behavior and, also, a reliable determination of crosslink densities. The consideration of dynamical contributions is discussed and a special numerical method is developed.     

龋病人牙釉质表面硬度及抗磨损性能测试

采用人工方法制成人牙釉质浅龋及使用抗龋措施的龋损釉质样本，分别测量各组釉质表面显微硬度，并以微动摩擦磨损试验机测试其抗磨性能，试验结果表明：各组实验组釉质较对照组表面硬度都有不同程度下降，氟化钠前处理会使釉质表达硬度显著下降，人工浅龋牙釉质的抗磨损性能不如正常釉质，使用两种抗龋措施对其抗磨性能没有明显改善。     

以催化油浆窄馏分为添加剂的Al－MCM－41分子筛的合成

 采用阳离子表面活性剂十六烷基三甲基溴化铵为模板剂，以正硅酸乙酯为硅源，以硫酸铝为铝源，水热合成了以催化油浆窄馏分为添加剂的高比表面积Al－MCM－41介孔分子筛，并利用XRD，HREM，TG－DTA及N2吸附－脱附等测试手段对合成样品进行了表征．合成的Al－MCM－41分子筛的比表面积和孔体积分别达到1295m2／g和1．5cm3／g，其平均孔径为4．3nm．重点研究了Al－MCM－41分子筛结晶度、晶胞参数、比表面积、孔体积及平均孔径等结构性质随催化油浆窄馏分添加量及其组成的变化规律，并从合成机理上进行了解释．     

吸热碳氢燃料裂解镧改性混合型催化剂的研究

制备了吸热型碳氢燃料NNJ-150和镧离子交换改性的USY、ZSM-5分子重申及混合分子筛，考察了NNJ-150在USHY、HZSM-5和两者混合物以及镧改性单分子筛和混合分子筛催化剂上的裂解反应。结果表明，ZSM-5分子筛中添加镧，对NNJ-150的单分子裂解反应有明显影响；混合分子两种分子筛之间存在协同作用，低温（500℃）下，LaUSY LaZSM-5（75：25）混合分子筛对低碳烯烃的选择性较高（41.48％），催化剂寿命较长（35min以上），能有效提高吸热型碳氢燃料NNJ-150的吸热能效。     

Dependence of Performance of Organic Light-emitting Devices on Sheet Resistance of Indium-tin-oxide Anodes

IntroductionIndium-tin-oxide(ITO) has been widely used asthe anode material in organic light-emitting devices(OLEDs) because of its high transmittance in the visi-ble region and low electrical resistivity. In the pastyears, many investigations focused on …     

Chemometric interpretation of pesticide occurence in soil samples from an intensive horticulture area in north Portugal

An extensive monitoring programme of pesticides was carried out in soil samples from an intensive horticulture area in north of Portugal, putting into practice the needs for increased control of soil quality as far as organic pollution is concerned. The area under investigation was additionally defined as vulnerable to nitrates due to local soil and aquifer characteristics, which might be extended to pesticides contamination. Five sampling sites were selected and soils analysed at three depths in eight sampling campaigns, for the period of 2 years. A stepwise multivariate statistical approach was selected to uncover most relevant patterns inside a complex environmental data matrix. Cluster analysis was applied both to group pesticides and samples, giving a primary and unsupervised overlook of privileged relationships. Clusters of persistent pesticides and selected herbicides were identified, whereas sample classes were also formed and disposed geographically. Thirty eight percent of analysed soils samples fell into one class characterized by low contamination (class 1 in cluster analysis), which is entirely representative of the sampling site no. 1. Afterwards, linear discriminant analysis was applied to identify those pesticides, which had a higher impact in the definition of classes. Finally, factor analysis using a five component model was implemented in order to bring to light the constitution and data variance explained by each of the five main principal components, as well as, their relation to pest management practices. A factor was identified (PC1 – 22% variance) composed of chlorinated pesticides, which was representative of one of the investigated sites indicating its high contamination status. Qualitative main findings and class average concentration values were obtained through this multivariate statistical approach.     

Simultaneous speciation of mercury and butyltin compounds in natural waters and snow by propylation and species-specific isotope dilution mass spectrometry analysis

A robust method has been developed for simultaneous determination of mercury and butyltin compounds in aqueous samples. This method is capable of providing accurate results for analyte concentrations in the picogram per liter to nanogram per liter range. The simultaneous determination of the mercury and tin compounds is achieved by species-specific isotope dilution, derivatization, and gas chromatography–inductively coupled plasma mass spectrometer (GC–ICP–MS). In derivatization by ethylation and propylation, reaction conditions such as pH and the effect of chloride were carefully studied. Ethylation was found to be more sensitive to matrix effects, especially for mercury compounds. Propylation was thus the preferred derivatization method for simultaneous determination of organomercury and organotin compounds in environmental samples. The analytical method is highly accurate and precise, with RSD values of 1 and 3% for analyte concentrations in the picogram per liter to nanogram per liter range. By use of cleaning procedures and SIDMS blank measurements, detection limits in the range 10–60 pg L^–1 were achieved; these are suitable for determination of background levels of these contaminants in environmental samples. This was demonstrated by using the method for analysis of real snow and seawater samples. This work illustrates the great advantage of species-specific isotope dilution for the validation of an analytical speciation method—the possibility of overcoming species transformations and non-quantitative recovery. Analysis time is saved by use of the simultaneous method, because of the use of a single sample-preparation procedure and one analysis.     

Rheology of polystyrene solutions around the coil overlapping concentration: A phenomenological description of stresses in simple shear flow

Linear viscoelasticity behavior is described with the sum of two terms for polystyrene solutions in tricresyl phosphate around the coil overlapping concentration (K. Osaki, T. Inoue, & T. Uematsu, J Polym Sci Part B: Polym Phys 2001, 39, 211). One is a Rouse–Zimm (RZ) term represented by the Zimm theory with arbitrarily chosen values of the hydrodynamic interaction parameter and the longest relaxation time (τ_RZ). The other (the L term) consists of a relaxation mode with a single relaxation time (τ_L > τ_RZ) and a high‐frequency limiting modulus proportional to the square of the concentration. In this study, we describe the viscosity (η) and first normal stress coefficient (Ψ₁) in steady shear with simple formulas. The stress due to the L term is assumed to be given by a Kaye, Bernstein, Kearsley, and Zapas (K‐BKZ) equation with the damping function h(γ) = (1 + 0.2γ²)^?1/2, where γ is the magnitude of shear. Contributions to η and Ψ₁ from the RZ term are derived from the RZ model, in which the relaxation time in steady flow is given by τ_st = τ + (τ_RZ ? τ)/(1 + 0.35τ_RZ γ˙) instead of τ_RZ. Here, γ˙ is the rate of shear, and τ is the τ_RZ value at the infinite dilution limit. η and Ψ₁ at various concentrations for two polystyrene samples (with molecular weights of 2890 and 8420 kg mol^?1) are well described with parameters derived from dynamic viscoelasticity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1038–1045, 2002     

Nitrotyrosine-modified proteins and oxidative stress induced by diesel exhaust particles

Protein tyrosine nitration is a post-translational modification that occurs under conditions of oxidative stress and may play a role in the pathogenesis of diseases such as asthma. Through their ability to generate reactive oxygen species in macrophages and epithelial cells, particulate pollutants, such as diesel exhaust particles (DEPs), may lead to a worsening of the asthmatic condition. In this study, we looked for evidence of oxidative modification of proteins in RAW 264.7 cell line treated with DEP chemicals. We show that the induction of oxidative stress is accompanied by 53 newly expressed proteins which are suppressed by a thiol antioxidant, N-acetylcysteine. These include antioxidant enzymes, pro-inflammatory components, and products of intermediary metabolism. In addition, inducible nitric oxide synthase (iNOS) was identified as a biologically relevant oxidative stress protein that is induced concurrent with increased NO production and protein tyrosine-nitration in DEP-exposed RAW 264.7 cells. Utilizing two-dimensional gel electrophoresis, anti-nitrotyrosine immunoblotting, and mass spectrometry led to the identification of an additional ten nitrotyrosine modified proteins, including oxidative stress proteins involved in intermediary metabolism (e.g., GAPDH and enolase), antioxidant defense (e.g., MnSOD) and inhibition of proteosomal activity (e.g., Hsp 90alpha). These oxidative proteins may serve as markers for oxidative stress generation in vivo.