Gas chromatographic system equipped with a mass detector and a selective nitrogen-phosphorous detector operating simulataneously in the analysis of pesticide residues

The possibility to perform gas chromatographic analysis using both a mass detector and a selective nitrogen-phosphorous detector will enable highly sensitive analytical results and an optimal identification reliability. In this work we describe an easily workable technical solution, which has been accomplished in our laboratory and the application of the above system to analytical procedures for the detection and determination of nitrogenous herbicides in drinking water and phosphorylated pesticides in agricultural products is discussed.     

Development and validation of methods for the trace determination of phthalates in sludge and vegetables

A routine method which is simple, quick and precise has been set up and validated for phthalate analysis in environmental samples (tomato plants and sewage sludges). Six phthalates have been studied simultaneously: dimethylphthalate, diethylphthalate, di-n-butylphthalate, n-butylbenzylphthalate, di-2-ethyl-hexyl phthalate (DEHP) and di-n-octylphthalate. Optimization of sample, solvent extraction uses a Soxtec apparatus and extract purification with an a solid-phase extraction cartridge allows between 90 and 110% recovery of phthalates. Precise, sensitive and selective identification and quantifying of analytes is by GC-MS in the single ion monitoring mode. This protocol allows analytes with concentrations as low as 10 microg/kg dry matter (DM) to be determined from small (1-2 g DM) samples. This analytical method has been applied to the phthalate transfer study for agricultural recycling of sludges, where phthalate bioavailability has been studied in aquiculture using two types of experiments. Tomatoes have been grown in containers where the trace organics have been directly introduced as pure substances, and in a second experiment under the same growth conditions, sewage sludge has replaced the pure substances. Transfer of these trace organics has been followed into the various parts of the tomato plant and in general only the DEHP is worthy of note although its percentage transfer remains very low even in an experiment designed to maximize this.     

The impact of LIMS design and functionality on laboratory quality achievements

 A laboratory information management system (LIMS) can make a major contribution to the quality and therefore to the efficiency and competitiveness of a laboratory. Since it can impact all aspects of a laboratory's organization it must be the key if not the principal player of the laboratory's quality system. It should support the laboratory in establishing, maintaining and applying quality procedures thereby enabling the laboratory to achieve its quality goals. As a tool, LIMS permits the laboratory to input and use its own know-how and experience to optimize the total organization (internal and external) and workflow of generated information. However, perceived "quality" in the context of an LIMS, can be viewed as being made up of different facets such as the security, reliability and accessibility of information as well as its turn around time and production cost. This paper reviews the role of a LIMS in the laboratory and the contribution that both system design and functionality can have on "building quality ". Received: 5 October 1998 · Accepted: 20 October 1998     

Spatially resolved characterization of PEFCs using simultaneously neutron radiography and locally resolved impedance spectroscopy

A method for performing neutron radiography and locally resolved impedance spectroscopy simultaneously in situ in an operating polymer electrolyte fuel cell (PEFC) is presented. The new method provides concurrently spatially resolved information about the local cell performance, the locally limiting processes, and the liquid water distribution. Information about the impact of water on cell performance and limiting processes can be gained in situ on a local scale in an operating PEFC. The method was applied to a PEFC operated on pure H₂/O₂ in co-flow mode under low humidity operating conditions. The results show that in co-flow mode strong flooding and severe drying can occur at the very same time in different sections of a PEFC.     

The detection of formaldehyde in textiles using interdigitated microelectrode array diffusion layer titration with electrogenerated hypobromite

An interdigitated microelectrode array (IDA) was applied to the determination of formaldehyde released from textiles produced in industry. The proposed method is based on formaldehyde reaction with hypobromite which is formed in weakly basic media by control current electrooxidation of bromide on the generator segment of the IDA array. The unreacted hypobromite diffuses through the gap between individually polarisable IDA segments and it is amperometrically detected on the collector segment of the IDA. The efficiency of this nonconvective transfer process in the absence of formaldehyde was substantially higher (78%) in comparison with that when using the rotating ring disc electrode. The influence of the added formaldehyde on the transfer process can be utilised to develop a simple and sensitive analytical procedure for formaldehyde detection with a detection limit of 4×10⁻⁶ mol dm⁻³.     

Ion-exchange method for separation and concentration of platinum and palladium for analysis of environmental samples by inductively coupled plasma atomic emission spectrometry

An ion-exchange procedure is proposed for determination of Pt and Pd in environmental samples, using a Dowex 1-X10 anion-exchange resin. Pt and Pd were separated from the matrix elements in the sample by selective retention on the column as anionic chloro complexes and subsequent elution by circulated thiourea at 60 °C. The eluent, containing Pt and Pd was analyzed by inductively coupled plasma (ICP) atomic emission spectrometry (AES). Average recoveries of 98% and detection limit of 15 ng/g for both metals were achieved. Analysis of Pt and Pd concentrations in road dust, sampled from several sites in Germany was performed. The comparison of the obtained data with the concentrations of Pt and Pd in the same samples, determined by ICP-MS showed a very good agreement.     

Quality assurance in research laboratories

During the last decade, it has become increasingly important that researchers demonstrate that research is conducted to the highest standards. The implementation of quality assurance for research laboratories will enable all fields of research and development to be judged impartially. There are no specific standards for research laboratories but where possible, existing standards can be adapted. This review is structured around two approaches. The first considers research to be a logical extension of testing, and it is assumed that testing standards can be applied methodically to each step in a research project. The second advocates a flexible approach, with research-specific criteria for assessing quality. The important papers published on this topic have been reviewed. The conclusions are that the general quality management approach, encompassed by the ISO 9000 series of standards with the emphasis on customer satisfaction and ‘fitness for purpose’, is suitable for implementing quality assurance in research laboratories.     

Monitoring nitrite with optical sensing films

A new, low-cost nitrite sensor was developed by immobilizing a direct indicator dye in an optical sensing film for food and environmental monitoring. This sensor was fabricated by binding Safranine O to a cellulose acetate film that had previously been subjected to an exhaustive base hydrolysis. The membrane has good durability (>12 months) and a short response time (<8 s). Nitrite can be determined for the range of 0.005-2.00 μg ml⁻¹ with 3δ detection limits of 0.001 μg ml⁻¹. The method is easy to perform and uses acetylcellulose as a carrier. The reagents used for the activity of the cellulose support are inexpensive, non-toxic and widely available.     

The European Eco-Management and Audit Scheme Accreditation – an overview

 Environmental quality is still deteriorating in the EU and worldwide despite all the Directives and Regulations in this field over the past 20 years. The European Community has devised a new approach to this problem with the introduction of the Eco-Management and Audit Scheme Regulation. This Regulation provides industry with an opportunity to demonstrate that it can achieve continuous improvement in its environmental performance through a voluntary scheme which is not based on the traditional command and control mechanisms of Directives. This paper gives an overview of the steps involved in implementing the European Eco-Management and Audit Scheme and the role of accreditation in supporting the scheme.     

Automated at-line solid-phase extraction-gas chromatographic analysis of micropollutants in water using the PrepStation

A fully automated at-line solid-phase extraction-gas chromatography procedure has been developed for the analysis of aqueous samples using the PrepStation. The sample extract is transferred from the sample preparation module to the gas chromatograph via an autosampler vial. With flame-ionization detection, limits of determination (S/N=10) of 0.05–0.13 μg/l were obtained for the analysis of HPLC-grade water when modifying the PrepStation by: (i) increasing the sample volume to 50 ml, (ii) increasing the injection volume up to 50 μl, and (iii) decreasing the desorption volume to 300 μl. The HP autosampler had to be modified to enable the automated “at-once” on-column injection of up to 50 μl of sample extract. The amount of packing material in the original cartridge had to be reduced to effect the decrease of the desorption volume. The total set-up did not require any further optimization after having set up the method once. The analytical characteristics of the organonitrogen and organophosphorus test analytes, i.e. recoveries (typically 75–105%), repeatability (2–8%) and linearity (0.09–3.0 μg/l) were satisfactory. The potential of the system was demonstrated by determining triazines and organophosphorus pesticides in river Rhine water at the 0.6 μg/l level using flame-ionization and mass-selective detection. No practical problems were observed during the analysis of more than 100 river water samples.