Polymers Derived from 4-Substituted Salicylic Acids as Antifungal Agents

4-Amino-, chloro-, and bromo-substituted salicylic acid-formaldehyde polymers and their metal chelates were screened for their antifungal activity. Various copolymers prepared from 4-chloro-(bromo)salicylic acid, formaldehyde, and other comonomers were also screened for their antifungal activity. All these polymers, copolymers, and polychelates were found active against several fungi Their fungicidal activities are compared with those of the corresponding monomers and monomeric chelates.     

pH-Responsive Nanocomposites From Methylcellulose and Attapulgite Nanorods: Synthesis,Swelling and Absorption Performance on Heavy Metal Ions

A pH-responsive methylcellulose-g-poly(sodium acrylate)/attapulgite (MC-g-PNaA/APT) nanocomposite superabsorbent was prepared by the free-radical solution polymerization of methylcellulose (MC), sodium acrylate (NaA) and nanoscale attapulgite (APT) in the presence of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The structure and morphology of the nanocomposite were characterized by FTIR, FESEM, TEM, XRD and EDS techniques, and the effects of the amount of MBA, MC and APT nanorods on swelling behaviors were also evaluated. Results indicate that NaA has been grafted onto MC macromolecular chains and APT nanorods participated in polymerization by its active silanol groups, and APT led to a better dispersion in the MC-g-PNaA matrix. The incorporation of APT clearly enhanced the swelling capacity and rate of the superabsorbent. In addition, the nanocomposite exhibited excellent absorption capacity on heavy metal ions, and its absorption amounts on Ni²⁺, Cu²⁺ and Zn²⁺ ions reached 9.86, 7.66 and 21.86 times greater than active carbon (AC). The biopolymer-based nanocomposite superabsorbents can be used as a potential water-saving material and candidate of AC for heavy metal ion absorption.     

Superfast Responsive Ionic Hydrogels: Effect of the Monomer Concentration

A series of strong polyelectrolyte gels were prepared in aqueous solution, using the sodium salt of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) as the monomer and N,N'‐methylene(bis)acrylamide (BAAm) as a crosslinker. The gels were both prepared below (?22°C) and above (25°C) the bulk freezing temperature of the water, producing cryogels and hydrogels, respectively. The crosslinker (BAAm) content was set at 17 mol%, while the initial monomer concentration C_o was varied over a wide range. It was found that, at ?22°C, a macroscopic network starts to form at an initial monomer concentration of as low as 0.1 w/v%. In contrast to the conventional hydrogels formed at 25°C, the cryogels have a discontinuous morphology consisting of polyhedral pores of sizes 10⁰–10² μm. The cryogels exhibit superfast swelling properties, as well as reversible swelling–deswelling cycles in water and acetone. An increase in the initial monomer concentration from 2.5 to 10% further increases the response rate of the cryogels due to the simultaneous increase of the porosity of the networks.     

Styrene-PEG (600) DMA Crosslinked Polymers for Absorption of Oil Derivatives

In this work, styrene (St) based crosslinked polymers were prepared for removal of oil derivatives from aqueous solutions. Polyethylene glycol (600) dimethacrylate (PEG (600) DMA) was used as crosslinker in synthesis of styrene based crosslinked polymers, for the first time. The polymers were characterized by FTIR, SEM, elemental analysis and solvent (toluene, chloroform and fuel-oil) absorption capacities. The effects of different reaction parameters like crosslinker type, diluents amount and the presence of pore forming agent on the absorption properties of polymers were investigated. The polymers synthesized by using PEG (600) DMA have higher solvent absorption capacity than that of synthesized by using conventional crosslinker. Furthermore, the polymers synthesized in the presence of good diluents have higher absorption capacities. The addition of pore forming agent into the reaction medium has also improved the absorption rate of polymers. The absorption capacity of polymers in different solvents is in order of chloroform > toluene > fuel-oil. It was seen that oil derivatives can be removed efficiently from water by the St-PEG (600) DMA polymers.     

The Effect of Volume Reorganization of Amorphous Poly(ethylene Terephthaiate) on Thermal Properties

When poly(ethylene terephthalate) was quenched from above T_g and then heated, it exhibited a step increase in thickness in the glass transition region at every rate tested. When the polymer was cooled more slowly than it was heated, a higher T_g and a slightly larger step increase in thickness were observed as the cooling rate was reduced. These experimental results appear to be adequately interpreted on the basis of the normal structural changes that occur in a glass as its thermal history is varied. Two observations, however, were not easily included in this view. First, the polymer, on cooling from above T_g, exhibited an abnormally high expansion coefficient over much of the range of temperature in which it exists as a fluid. Second, the polymer exhibited a step increase in thickness when it was heated at the same rate at which it had previously been cooled.     

Swelling and Network Parameters of 1-Hexadecene-Co-Trimethylolpropane Distearate Monoacrylate Sorbers

Linear and crosslinked copolymers with different compositions of 1-hexadecene and trimethylolpropane distearate monoacrylate monomers were synthesized and evaluated for oil-absorbency application. Different concentrations of ethylene glycol diacrylate (EGDA) and ethylene glycol dimethacrylate (EGDMA) crosslinkers were used. The concentration of both crosslinkers was varied from 0.5% to 2%. Copolymer compositions were determined from ¹H NMR spectroscopy. Monomer reactivity ratios were calculated using Fineman-Ross and Kelen-Tudos techniques at low conversions. The oil absorbency and swelling rate constant were measured and influenced mainly by the degree of crosslinking and the hydrophobicity of copolymer units. The final equilibrium oil content, volume fraction of polymer and swelling capacity were determined at 298 K. The effective crosslinking density V_e, theoretical crosslink density V_t, the average molecular weight between the crosslinks M_c and the polymer-toluene interaction parameter χ were determined from swelling measurements. The efficiencies of EGDA and EGDMA crosslinking agents toward copolymers were determined.     

聚乙烯醇/壳聚糖复合水凝胶的物理化学性质

测定了聚乙烯醇(PVA)和壳聚糖(CS)复合水凝胶的平衡含水量、熔融焓、等温溶胀动力学和非等温失水动力学等性质,讨论了水凝胶的组成和制备参数对这些性质的影响.结果显示:PVA/CS复合水凝胶具有适宜于软骨修复替代材料的网络结构和平衡含水量.CS与PVA复合减弱了凝胶的结晶度,但却增强了水与凝胶支架的相互作用.尽管水凝胶力学拉伸强度有所降低,但却优化了凝胶的生物相容性和降解能力.PVA/CS复合水凝胶是一种潜在的软骨修复材料,作为一种理论研究的模型体系,它将促进热力学在复杂医用材料方面的应用.     

Synthesis of dual pH- and temperature-sensitive poly(N-isopropylacrylamide-co-acrylic acid)/sewage sludge ash hydrogel with the simultaneously high performance of swelling and deswelling

An advanced dual pH- and temperature-sensitive hydrogel (NASH2.5) was optimally synthesized through modification of N-isopropylacrylamide (NIPAM) hydrogel with introducing 5 mol% acrylic acid (AA) and 2.5 wt% sewage sludge ash (SSA). The swelling kinetic results showed that NASH2.5 exhibited both high equilibrium swelling ratio and swelling rate, which was attributed to the higher porous structure as shown in scanning electron microscope, and the more hydrogen bonding formed inside of the hydrogel as investigated in Fourier transform infrared spectrometer. In addition, its curve was better fitted to the pseudo-second-order model, indicating that the water absorption process was dominated by chemisorption through forming the hydrogen bonding among the water molecules and carboxyl/silanol groups of the hydrogel. Compared with the pure NIPAM hydrogel, the water transport mechanism switched from Case I diffusion to Case II diffusion by introduction of AA and further SSA. Furthermore, through the results of the deswelling kinetics in pH value change (from 9 to 4 and 2, respectively), temperature value change (from 25 to 40, 50, and 60°C, respectively), and dual pH and temperature values changes, NASH2.5 not only presented a high pH sensitivity, but also showed high sensitive to temperature by achieving high water recovery ratio in rapid dehydrated rate. Therefore, the dual stimuli-sensitive hydrogel with the simultaneously high performance of swelling and deswelling would provide a suitable alternative for specific applications such as pollutant adsorption.