Studies in crystal structure and luminescence properties of Eu-doped metal tungstate phosphors for white LEDs

The correlation between the crystal structure and luminescent properties of Eu³⁺-doped metal tungstate phosphors for white LEDs was investigated. Red-emitting A_4−3x(WO₄)₂:Eu_x³⁺ (A=Li, Na, K) and B_(4−3x)/2(WO₄)₂:Eu_x³⁺ (B=Mg, Ca, Sr) phosphors were synthesized by solid-state reactions. The findings confirmed that these phosphors exhibited a strong absorption in the near UV to green range, due to the intra-configurational 4f-4f electron transition of Eu³⁺ ions. The high doping concentration of Eu³⁺ enhanced the absorption of near UV light and red emission without any detectable concentration quenching. Based on the results of a Rietveld refinement, it was attributed to the unique crystal structure. In the crystal structure of the Eu³⁺-doped metal tungstate phosphor, the critical energy transfer distance is larger than 5 Å so that exchange interactions between Eu³⁺ ions would occur with difficulty, even at a high doping concentration. The energy transfer between Eu³⁺ ions, which causes a decrease in red emission with increasing concentration of Eu³⁺, appears to be due to electric multi-polar interactions. In addition, the Eu-O distance in the host lattice affected the shape of emission spectrum by splitting of emission peak at the ⁵D₀→⁷F₂ transition of Eu³⁺.     

两原子相干共振能量传递的单次与N次能量提取

两原子间隔一定距离且两原子跃迁频率接近时,两原子之间可发生能量传递.理论研究了供能原子和受能原子两共振原子的能量传递.求解薛定谔方程得出两原子共振能量传递效率.结果表明,供能原子在真空场中的激发态寿命在能量传递效率中起到十分重要的作用.能量传递效率与两原子间距离的负三次幂的正弦值的平方成正比,在一阶近似条件下,与两原子间距离的6次方成反比.以供能原子处于激发态时为初始时刻,能量从初始时刻随时间由供能原子向受能原子传递,对受能原子的单次能量提取的最大值大约在供能原子寿命的2/3时刻;对受能原子的连续N次能量提取的最大值,每次提取时间大约在供能原子寿命的1/2时刻.     

基于荧光共振能量转移的核酸适体传感器研究

基于荧光共振能量转移的原理,以修饰于核酸适体上的FAM作为能量供体,以氧化石墨烯作为能量受体,构建了荧光适体传感器,分别对不同浓度的胰岛素和多巴胺进行检测.结果表明,胰岛素的线性检测范围为0.05~10μmol/L,多巴胺的线性检测范围为1~500μmol/L,当胰岛素和多巴胺检测浓度相同时,胰岛素检测信号远强于多巴胺.对胰岛素和多巴胺分别进行特异性实验,发现该传感器对胰岛素和多巴胺有较强的特异性.说明基于荧光共振能量转移的核酸适体传感器不仅可实现多种物质的微量检测,还具有较强的选择性,在生物和医药检测领域应用前景广阔.     

超强飞秒激光与固体靶产生的超热电子加热机制

 在SILEX-1激光器上测量了超强飞秒激光与Ta靶相互作用产生的出射超热电子能谱及角分布,研究了出射超热电子加热机制。激光脉宽为 30 fs,激光功率密度为8.5×10¹⁸ W/cm²。靶前法线方向超热电子温度为550 keV。从实验结果可知：共振吸收是靶前法线方向超热电子主要加热机制,这与靶前存在大密度标长预等离子体的实验条件吻合。靶厚为6～50 μm时,靶后超热电子沿法线方向出射;靶厚为2 mm时,该发射峰消失。     

高能COIL偏振态的实验研究

 通过两块楔镜补充衰减和中性衰减片相结合的能量衰减方法,测得了功率密度为20 W/mm² COIL的偏振态。采用角反射器作为稳定腔折返装置,提高了激光能量分布的均匀性。激光光束分别以45°的入射角入射到两块楔镜上,被楔镜反射后,垂直通过中性衰减片,最后进入偏振态测试仪。实验结果表明：在腔内没有任何偏振选择器件和不加外部电磁场的情况下,采用折叠式稳定腔的横流双模块氧碘化学激光光束呈现部分偏振性质,而且在出光过程中偏振度逐渐降低。     

软X射线条纹相机的静态性能研究

软X光扫描相机是对软X光时间持性进行研究的主要诊断工具,我们利用 同步辐射作为光源,对它的静态性能：能量响应、增益等性能进行了相对标定,给出了软X 光条纹相机的能量响应曲线和增益特性曲线,并与利用B.L.Henke的经验公式计算给出的响 应曲线比较,其结果与理论较符合。     

AB_5型储氢合金及混合稀土的ICP-AES分析

对于制备镍氢电池负极材料的 AB5型储氢合金 ,制备储氢合金的原材料混合稀土主体元素和杂质元素的分析方法进行了较为详尽的研究。利用仪器的功能软件初步选出各分析元素的多条谱线 ,通过综合考察各干扰元素对分析元素波长的干扰系数 ,确定出各元素的最佳分析波长 ,部分受干扰的元素用干扰系数校正法进行了校正。本法应用于实际产品分析 ,分析精密度为 0 .12 %— 1.32 %之间 ,回收率在94 %— 10 6%之间。     

A simplified cavity analysis for estimating energy coupling during laser ablation and drilling of solids — experiment

The theory for a general departure function, f, for laser-irradiated cavities was previously developed to estimate laser energy coupling to an opaque solid target as a function of heat transfer and the cavity shape and size. In this article, a specific form of f is calculated for ultraviolet (UV) laser ablation of copper (Cu) and aluminum (Al) targets. Methods are also given for calculating the geometric factor, a, and experimentally determining the heat transfer parameter, ν, which is shown for this form of f to be the intensity-dependent effective reflectivity of the material. Experimental results for different gauges of laser energy coupling with a solid target are given and compared to calculations of net absorbed energy based on f and the incident laser energy. Using the simplified cavity analysis, the results demonstrate that the experimental values for f fall within the limits predicted by the theory, and that energy coupling can be predicted to within a mean of 2% of experimental gauges. Neglecting the factors in f from calculations of energy coupling can lead to large errors for laser-irradiated cavities, establishing that both cavity shape and heat transfer should be simultaneously considered. In addition, a first-order sensitivity analysis based on f shows that the initial rate of change in material removal strongly increases with reflectivity, which can lead to runaway cavity formation for highly reflective materials.     

热声热机中的能量模拟与分析

文中主要对回热器中的能流及其能流分量进行了模拟 ,并在此基础上分析了能流及其分量对热声热机的影响 ,为更深地理解热声热机中所发生的能量转换现象 ,更好地设计热声热机提供有价值的依据和参考。