Solid phase analytical derivatization of anthropogenic and natural phenolic estrogen mimics with pentafluoropyridine for gas chromatography-mass spectrometry

A simple, low cost, fast and sensitive method is reported for the determination of the four endocrine disrupting chemicals (EDCs) 4-tert-butylphenol, 4-tert-octylphenol, bisphenol A and 17β-estradiol using pentafluoropyridine as the derivatizing reagent. These EDCs were determined by simultaneous extraction and derivatization in a solid phase analytical derivatization (SPAD) technique without the aid of any phase transfer catalyst (PTC) or an ion-pair mechanism. Recoveries of analytes as their tetrafluoropyridyl derivatives from water ranged from 71% for 4-tert-butylphenol to 106% for 17β-estradiol; from urine they ranged from 61% for 17β-estradiol to 91% for 4-tert-octylphenol; and from humic acids solution the ranged from 59% for 17β-estradiol to 104% for 4-tert-octylphenol in humic acid solutions. Calibration curves were constructed from a matrix of human male urine in the range 1-40 ng/mL and had coefficients of correlation greater than 0.99. For 4-tert-butylphenol, bisphenol A and 17β-estradiol the limits of quantitation were 5 ng/mL and for 4-tert-octylphenol it was 1 ng/mL. This method was applied to determine EDCs and detected 4-tert-octylphenol, bisphenol A and 17β-estradiol in concentrations comparable to those found in the literature. The method offers advantages in speed of analysis, reduced reagent and specificity of derivatization.     

Stir bar sorptive extraction of parabens, triclosan and methyl triclosan from soil, sediment and sludge with in situ derivatization and determination by gas chromatography-mass spectrometry

The aim of this research work was the evaluation of stir-bar sorptive extraction (SBSE) in combination with an in situ derivatization to determine parabens (methylparaben, isopropylparaben, n-propylparaben, butylparaben and benzylparaben), triclosan and methyltriclosan in soil samples. This is the first time that this approach has been applied to the determination of these compounds in soil samples, providing important advantages over conventional extraction techniques, such as minimization of sampling handling, complete elimination of the use of organic solvents and simplification of the analytical procedure with reduced time consumption. The enriched target analytes were desorbed thermally using a thermodesorption system coupled to a gas chromatograph and a mass spectrometer. The optimized derivatization and SBSE extraction conditions, as well as the analytical characteristics of the method were obtained using spiked soil samples. The proposed methodology proved to be easy to use and sensitive, with limits of detection between 80 ng/kg and 1.06 μg/kg, and reproducibility values below 13%. The accuracy of the method was evaluated at two concentration levels, obtaining apparent recoveries between 91% and 110%. The matrix composition significantly influenced the extraction procedure, and a need to adopt a standard additions protocol is apparent. The analytes assayed were determined successfully in different environmental soil samples.     

Bisphenol A-recognition polymers prepared by covalent molecular imprinting

A specific recognition material for bisphenol A (BPA) was prepared by using a covalent imprinting technique. A chloroform solution containing bisphenol A dimethacrylate as a template, ethylene glycol dimethacrylate as a cross-linking agent and 2,2′-azobis(isobutyronitrile) as an initiator was polymerized by UV initiation. When BPA was removed from the resulting polymer by hydrolysis of the ester bonds with aqueous sodium hydroxide, carboxylic acid residues were generated in the polymer. After the polymer was packed into a stainless steel column, retention factors of BPA and related compounds were measured. The imprinted polymer adsorbed BPA and structurally related compounds such as 4,4′-dihydroxybenzophenone, bis(4-hydroxyphenyl)sulfone and 4,4′-dihydroxybiphenyl. A typical association constant (K_a) was calculated to be 1.72×10⁵ M⁻¹ by Scatchard analysis. Interestingly, 17α- and 17β-estradiol were also bound to the imprinted polymer (K_a=1.68×10⁵ M⁻¹), indicating that the polymer could be used as artificial receptors for screening the compounds having estrogenic action.     

Evaluation of soot particles of biomass fuels with endocrine-modulating activity in yeast-based bioassay

Exposure to indoor air pollution (IAP) from the combustion of biomass fuels is an important cause of morbidity and mortality in developing countries. In the work discussed in this paper we evaluated the endocrine activity of soot particles from biomass fuels by using yeast bioassay. These pollutants could have -galactosidase activity with a relative potency (RP) about 10^–7–10^–9 that of estradiol. Soot particles from wood and straw combustion only partially induced -galactosidase activity whereas others produced fully inductive activity in the yeast assay system. These pollutants did not have estrogen antagonist and progesterone agonist activity within the defined concentration range. However, these pollutants require 2–4 orders of magnitude higher IC50 to inhibit the activity of progesterone in a similar dose-response manner to mifepristone. We therefore propose that the endocrine activity of some environmental pollutants may be because of inhibition of the progesterone receptor (hPR). GC–MS results showed that substituted polycyclic aromatic hydrocarbon (PAH) compounds, substituted phenolic compounds and derivatives, aromatic carbonyl compounds, and phytosteroids in these soot particles may be mimicking endogenous hormones.     

A comparison of three analytical techniques for the measurement of steroidal estrogens in environmental water samples

Research into the analysis and monitoring of steroidal estrogens has grown significantly over the last decade, resulting in the emergence of a range of applicable techniques. In this study, three popular techniques, gas chromatography-mass spectrometry (GC-MS), gas chromatography-tandem mass spectrometry (GC-MS-MS) and liquid chromatography-tandem mass spectrometry (LC-MS-MS) for the analysis of three highly potent steroidal estrogens in the aquatic environment have been compared. It has been observed that overall, the three techniques appear comparable in generating similar estrogen concentrations for river and effluent samples. Of the three techniques, the GC-MS technique is the simplest to operate, but fails to detect the estrogens at the lower-end of environmentally relevant concentrations. The tandem MS techniques are more selective than MS, and therefore able to detect lower concentration levels of the three steroidal estrogens of interest. However, the LC-MS-MS technique is more susceptible to matrix interferences for the analysis of samples, resulting in a reduction of the signal-to-noise ratio and a subsequent reduction in reliability and stability compared to GC-MS-MS. With the GC-MS-MS technique offering increased selectivity, the lowest limits of detection, and no false positive identification, it is recommended to be the preferred analytical technique for routine analysis of estrogens in environmental water samples.     

Imprinted silica nanoparticles coated with N‐propylsilylmorpholine‐4‐carboxamide for the determination of m‐cresol in synthetic and real samples

m‐Cresol‐imprinted silica nanoparticles coated with N‐propylsilylmorpholine‐4‐carboxamide have been developed that contain specific pockets for the selective uptake of m‐cresol. Silica nanoparticles were synthesized by a sol–gel process followed by functionalization of their surface with N‐propylsilylmorpholine‐4‐carboxamide. The formation of m‐cresol‐imprinted silica nanoparticles was confirmed by UV‐Vis spectrophotometry, infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. Electron microscopic studies revealed the formation of monodispersed imprinted silica nanoparticles with spherical shape and an average size of 83 nm. The developed nanoparticles were filled in a syringe and used for the extraction of m‐cresol from aqueous samples followed by quantification using high‐performance liquid chromatography with diode array detection. Various adsorption experiments showed that developed m‐cresol‐imprinted silica nanoparticles exhibited a high adsorption capacity and selectivity and offered a fast kinetics for rebinding m‐cresol. The chromatographic quantification was achieved using mobile phase consisting of acetonitrile/water (70:30 v/v) at an isocratic flow rate of 1.0 mL/min using a reversed‐phase C₁₈ column and detection at λ_max = 275 nm. The limits of detection and quantification were 1.86 and 22.32 ng/mL, respectively, for the developed method. The percent recoveries ranged from 96.66–103.33% in the spiked samples. This combination of this nanotechnique with molecular imprinting was proved as a reliable, sensitive and selective method for determining the target from synthetic and real samples.     

Continuous solid-phase extraction and preconcentration of bisphenol A in aqueous samples using molecularly imprinted columns

A bisphenol A (BPA) molecularly imprinted polymer, the composition of which was optimised using a chemometric approach, has been applied to the selective preconcentration of the template from aqueous samples. The selectivity of the polymer toward BPA and related compounds was evaluated chromatographically. The BPA-imprinted polymer was packed in a column and used for continuous on-column solid-phase extraction (MISPE) of aqueous samples followed by subsequent analysis by HPLC with fluorescence detection of the eluted fractions. The composition of the washing solvent applied in the MISPE procedure was optimised to favour the specific interactions of the MIP with BPA and to remove the non-selectively bound matrix components. The MISPE method has proven to be effective for selective preconcentration of BPA in aqueous samples (recoveries >84% obtained in the eluate for 10–100 mL sample volumes) enabling detection and quantification limits of 1.0 and 3.3 ng mL^–1, respectively (based on 25 mL sample size). Analytical recoveries were between 92 and 101% for river water samples spiked with known amounts of BPA (30, 60, and 80 ng mL^–1); relative standard deviations (RSD) were lower than 5.0%.     

Removal of 17β-estradiol by powdered activated carbon—Microfiltraion hybrid process: The effect of PAC deposition on membrane surface

The removal of 17β-estradiol (E2) was investigated in a powdered activated carbon-submerged microfiltration (PAC-MF) hybrid system to better understand the effect on the system performance of PAC deposition on the membrane. A series of experiments were carried out under various operating conditions. Although the rejection or adsorption of E2 by MF membrane itself was almost negligible, the concentration of E2 in the permeate was always lower than it was in the reactor. This is because E2 was further removed as it passed through the PAC layer deposited on the membrane. As the E2 removal efficiency by the deposited PAC was lower than that by the PAC in the bulk phase, the overall E2 removal was largely dependent on the fraction of the deposited PAC on the membrane which were influenced by operating parameters such as permeate flux, hydraulic retention time (HRT) and mixing intensity in a PAC-MF system. The effect of these parameters on the overall E2 removal rate were also determined quantitatively using model equations developed in this study.     

Extraction,separation, and fluorometric analysis of selected environmental contaminants

Teratogenic, carcinogenic, and pervasive endocrine disrupting compounds (EDCs) in suspect water systems present an immediate threat to both the environment and potable water supplies. The US Environmental Protection Agency mandated research regarding suspect EDCs, personal care products, and pesticide pollution requires the use of suitable methods of analysis that can perform extraordinarily well in the field and show low “cost to benefit” ratios. Such methods must increasingly address the need for enhanced sensitivity and selectivity in interrogating complex mixtures. Here, several device and method optimization strategies, specific for these classes of compounds, are discussed and include, among others, the preconcentration of field samples utilizing high performance extraction disk cartridges. Matrix interferences and undetectable concentration levels are eliminated by the way of an RP extraction technique that is vital to obtaining detectable concentrations of target analytes in the ppb range. Established capillary EKC methods are modified and implemented on a short capillary for low nanoliter discrete injections, efficient separations, and detection with LIF of analyte mixtures. Efficient separations were achieved with plate counts ranging from 10³ to 10⁴. Analytes spiked into real sample matrices at ppb levels were easily separated and detected via LIF using a He/Cd laser operating at 325 nm. The presented techniques are valuable in determining both the presence and concentration of suspect contaminates in different water systems. The methods presented here could easily be extended to microfluidic platforms with little to no optimization for on‐site testing.     

Simultaneous determination of triclosan,triclocarban, and transformation products of triclocarban in aqueous samples using solid‐phase micro‐extraction‐HPLC‐MS/MS

The presence of triclosan and triclocarban, two endocrine‐disrupting chemicals and antimicrobial agents, and transformation products of triclocarban, 1,3‐di(phenyl)urea, 1,3‐bis(4‐chlorophenyl)urea and 1,3‐bis(3,4‐dichlorophenyl)urea, in tap water, treated household drinking water, bottled water, and river water samples were investigated using solid‐phase micro‐extraction coupled with‐HPLC‐MS/MS, a rapid, green, and sensitive method. Factors influencing the quantity of the analytes extracted onto the solid‐phase micro‐extraction fiber, such as addition of salt, sample pH, extraction time, desorption time, and sample volume, were optimized using solid‐phase micro‐extraction‐HPLC‐MS/MS. The results showed that the method gave satisfactory sensitivities and precisions for analyzing sub‐part‐per‐trillion levels of triclosan, triclocarban, and transformation products of triclocarban in samples collected locally. The recoveries of analytes ranged from 97 to 107% for deionized water samples, and 99 to 110% for river water samples, and limits of detection were in the range of 0.32–3.44 and 0.38–4.67 ng/L for deionized water and river water samples, respectively. On average, the daily consumption of triclosan and triclocarban by an adult by consuming 2 liters of different types of drinking water were estimated to be in the range of 6.13–425 ng/day as a result of the concentrations of triclosan and triclocarban measured in this study.