Solid‐State Gas Sensors Developed from Functional Difluoroboradiazaindacene Dyes

This article describes the synthesis and characterization of several new difluoroboradiazaindacene (BODIPY?) dyes functionalized at the central 8‐position by a phenyliodo, phenylheptynoate or phenylheptynoic fragment and at the 3‐ or 3/5‐position(s) by 4‐dimethylaminophenylstyryl residue(s). Single‐crystal structural determinations confirm the planarity of the dyes, while the absorption and fluorescence spectroscopic properties are highly sensitive to the state of protonation (or alkylation) of the terminal anilino donor group(s). Reversible color tuning from green to blue for absorption and from colorless (i.e., near‐IR region) to red for fluorescence is obtained on successive addition of acid and base. The difunctionalized derivative is especially interesting in this respect and shows two well‐resolved pK_a values of 5.10 and 3.04 in acetonitrile. Addition of the first proton causes only small spectral changes and deactivates the molecule towards addition of the second proton. It is this latter step that accommodates the large change in absorption and emission properties, due to the reversible extinction of the intramolecular charge‐transfer character inherent to this type of dye. The main focus of the work is the covalent anchoring of the dyes to inert, porous polyacrylate beads so as to form a solid‐state sensor suitable for analysis of gases or flowing liquids. The final material is highly stable—its performance is undiminished after more than one year—and fully reversible over many cycles. The sensitivity is such that reactions can be followed by the naked eye and the detection limit is about 600 ppb for HCl and about 80 ppb for ammonia. Trace amounts of diphosgene can be detected, as can alkylating agents. The sensing action is indiscriminate and also operates when the beads are dispersed in aqueous media.     

Microarray of DNA probes on carboxylate functional beads surface

The microarray of DNA probes with 5' -NH2 and 5' -Tex/3' -NH2 modified terminus on 10 um carboxylate functional beads surface in the presence of 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) is characterized in the preseni paper. it was found that the microarray capacity of DNA probes on the beads surface depends on the pH of the aqueous solution, the concentra-tion of DNA probe and the total surface area of the beads. On optimal conditions, the minimum distance of 20 mer single-stranded DNA probe microarrayed on beads surface is about 14 nm, while that of 20 mer double-stranded DNA probes is about 27 nm. If the probe length increases from 20 mer to 35 mer, its microarray density decreases correspondingly. Mechanism study shows that the binding mode of DNA probes on the beads surface is nearly parallel to the beads surface.     

The detection of tetrahydrofuran hydrate formation and saturation using magnetic resonance imaging technique

Tetrahydrofuran (THF) hydrate was formed in bulk as well as in glass beads pack with a mean diameter of 3.0 mm by controlling the temperature under ambient pressure. Images of THF hydrate formation procedure were obtained using the magnetic resonance imaging (MRI) technique. The experiment results showed that MRI is an effective method for the detection of hydrate formation. Saturation of hydrate formed both in bulk and glass beads can be confirmed by intensity integration of MRI images.     

Magnetic bead based immunoassay for enumeration of CD4 T lymphocytes on a microfluidic device

Human immunodeficiency virus (HIV) diagnostics are urgently needed in resource-scarce settings. Monitoring of HIV-infected patients requires accurate counting of CD4⁺ T lymphocytes. However, the current methods for enumeration of CD4⁺ T lymphocytes are of high cost, technically complex and time-consuming. In this paper, we developed a simple, rapid and inexpensive one-step immunomagnetic method for separating and counting CD4⁺ T lymphocytes on microfluidic devices with enlarged reaction chambers. CD4⁺ T lymphocytes were successfully separated and captured from the cell suspension obtained from mouse thymus. CD4 counts were determined under an optical microscope in a rapid and simple format. In order to acquire the maximum efficiency of cell capture, relative parameters were investigated, including section area of the reaction chamber and injection flow rate of the cell suspension. The enlarged reaction chamber with two symmetrical cone-shaped ends was helpful for cell capture, and the maximum capability of captured CD4⁺ T lymphocytes was about 700 cells μL⁻¹. Our investigations avoided the complex sample pre-treatment, and the entire analysis time was significantly reduced to 15 min. This CD4 counting microdevice had the potential to reduce the cost for HIV diagnosis in resource-limited settings.     

Preparation of magnetic indole-3-acetic acid imprinted polymer beads with 4-vinylpyridine and β-cyclodextrin as binary monomer via microwave heating initiated polymerization and their application to trace analysis of auxins in plant tissues

Auxin is a crucial phytohormone for precise control of growth and development of plants. Due to its low concentration in plant tissues which are rich in interfering substances, the accurate determination of auxins remains a challenge. In this paper, a new strategy for isolation and enrichment of auxins from plant tissues was obtained by the magnetic molecularly imprinted polymer (mag-MIP) beads, which were prepared by microwave heating initiated suspension polymerization using indole-3-acetic acid (IAA) as template. In order to obtain higher selective recognition cavities, an enhanced imprinting method based on binary functional monomers, 4-vinylpyridine (4-VP) and β-cyclodextrin (β-CD), was adopted for IAA imprinting. The morphological and magnetic characteristics of the mag-MIP beads were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy and vibrating sample magnetometry. A majority of resultant beads were within the size range of 80-150μm. Porous surface morphology and good magnetic property were observed. Furthermore, the mag-MIP beads fabricated with 4-VP and β-CD as binary functional monomers exhibited improved recognition ability to IAA, as compared with the mag-MIP beads prepared with the individual monomer separately. Competitive rebinding experiment results revealed that the mag-MIP beads exhibited a higher specific recognition for the template than the non-imprinted polymer (mag-NIP) beads. An extraction method by mag-MIP beads coupled with high performance liquid chromatography (HPLC) was developed for determination of IAA and indole-3-butyric acid (IBA) in plant tissues. Linear ranges for IAA and IBA were in the range of 7.00-100.0μgL(-1) and 10.0-100.0μgL(-1), and the detection limits were 3.9 and 7.4μgL(-1), respectively. The analytical performance was also estimated by seedlings or immature embryos samples from three different plant tissues, pea, rice and wheat. Recoveries were in the range of 70.1-93.5%. The results show that the present imprinting method is a promising approach for preparation of selective adsorbents for sample preparation of auxin analysis in plant tissues.     

A Facile Latex Agglutination Lectin Assay (LALA) for Weakly Binding Ligands

To apply the latex agglutination lectin assay (LALA) to carbohydrate ligands, monosaccharide derivatives were incorporated onto latex beads by various methods, and the usefulness of the resulting beads was evaluated. The best outcome, which resulted in aggregation with lectin concentrations of 1 to 4 μg/mL, was obtained when latex beads coated with bovine serum albumin were treated with divinylsulfone, a linker agent, and then with 2-aminoethyl glycosides. Monosaccharides with an amino or anomeric hydroxyl group other than N-acetylglucosamine were applicable in this direct LALA. For example, mannose- and 5-thiomannose-coupled latex beads showed aggregation with minimum concanavalin (ConA) concentrations of 4 and 32 μg/mL, respectively. An inhibition assay was more versatile than the direct LALA, and the standardized inhibition activity (EC⁰ ₅₀) was determined for several compounds. Representative EC⁰ ₅₀ data for mannose, methyl mannoside, and p-nitrophenyl mannoside (1, 0.12, and 0.06 mM, respectively) are consistent with those reported with other methods. We obtained EC⁰ ₅₀ values for some synthetic compounds with slightly different binding abilities to ConA, demonstrating a semiquantitative character of this method. The inhibition LALA can be performed without instrumentation or tedious derivatization and is thus suitable for the rapid evaluation of monovalent ligands prior to assemblage into multivalent ligands.     

Purification of transferrin by magnetic immunoaffinity beads

Immunoaffinity adsorbent for transferrin (Tf) purification was prepared by immobilizing anti‐transferrin (Anti‐Tf) antibody on magnetic monosizepoly(glycidyl methacrylate) beads, which were synthesized by dispersion polymerization technique in the presence of Fe₃O₄nanopowder and obtained with an average size of 2.0 μm. The magnetic poly(glycidyl methacrylate) (mPGMA) beads were characterized by Fourier transform infrared spectroscopy, swelling tests, scanning electron microscopy, electron spin resonance spectroscopy, thermogravimetric analysis and zeta sizing analysis. The density and swelling ratio of the beads were 1.08 g/cm³ and 52%, respectively. Anti‐Tf molecules were covalently coupled through epoxy groups of mPGMA. Optimum binding of anti‐Tf was 2.0 mg/g. Optimum Tf binding from aqueous Tf solutions was determined as 1.65 mg/g at pH 6.0 and initial Tf concentration of 1.0 mg/mL. There was no remarkable loss in the Tf adsorption capacity of immunoaffinity beads after five adsorption–desorption cycles. Tf adsorption from artificial plasma was also investigated and the purity of the Tf molecules was shown with gel electrophoresis studies.     

基于自动磁珠转运的转基因蛋白Cry1Ab检测

基于自动磁珠转运,建立了转基因蛋白Cry1Ab免疫检测的新方法.利用水热法制备了粒径约400 nm的纳米磁球,并进行电镜表征,通过溶胶法对磁球表面进行氨基修饰,采用戊二醛偶联对磁珠实现抗体包被,在核酸提取仪中进行酶联免疫反应,采用分光光度法进行检测.本方法对转基因蛋白Cry1Ab的检出限低于1 μg/L,与商品化酶联免...