辽河冷家油田特稠油降粘剂LJVR-1及其性能评价

采用荧光法测定了辽河冷家油田冷47-556井特稠油乳化HLB值,然后以混合型表面活性剂、非离子型表面活性剂为主剂,快速渗透剂为辅剂按一定比例制备了水基降粘剂LJVR-1.实验结果表明,该降粘剂具有良好的乳化降粘性能,开采后易于破乳脱水,是一种较为理想的特稠油降粘剂.     

A new method for the reduction of nitronyl nitroxides

Reduction of nitronyl nitroxides using hexamethylenetetramine is a very convenient method for preparing the corresponding imino nitroxides and 2-imidazoline N-oxides.     

Enantioselective synthesis of preclavulone A and its methyl ester

A highly enantioselective synthesis of the (8S,12S)-enantiomer of preclavulone A and its methyl ester is described featuring the Julia protocol for installing the (Z)-double bond in the lower chain. This procedure is suitable for the preparation of labeled preclavulone analogues for biosynthetic studies on marine clavulones.     

置换环上的稳定矩阵

本文证明了置换环上的正则稳定矩阵是幂等矩阵和可逆矩阵的积,进一步证明了置换环上的正则稳定矩阵可以对角化。     

Catalytic enantioselective Mukaiyama aldol reaction via a chiral indium(III)-pybox complex

A chiral indium(III) complex prepared from indium triflate and a pybox ligand has been developed to give good yields and enantioselectivities (up to 92% ee) in the addition of (1-methoxy-2-methyl-propenyloxy)-trimethylsilane to various aromatic and aliphatic aldehydes via the Mukaiyama aldol reaction.     

Schedule-an expert-like system for machine scheduling

The construction of an expert-like system for machine scheduling called SCHEDULE is presented. Essential parts of SCHEDULE were developed by students in a laboratory course Operations Research on Microcomputers at the University of Karlsruhe, Germany. SCHEDULE consists of the components data base, knowledge base, inference engine, explanation facility, dialog component, and knowledge acquisition component. The knowledge base contains an algorithm base for solving different types of scheduling problems. To establish the rules of the knowledge base the well-known three-field classification of deterministic machine scheduling problems and the concept of the reduction digraph are exploited. Experiences gained during building and demonstrating SCHEDULE are reported.     

苯部分加氢制环己烯的非晶态Ru-M-B/ZrO2催化剂的表征

采用化学还原法，制备了高活性，高选择性非晶态RU-M-B/ZRO2催化剂，并将其用于催化苯部分加氢制环己烯，在140℃、5.0Mpa氢压下，苯转化40%时，环己烯选择性达到85%左右。环己烯最高收率达到52.1%，用XRD、SEM、BET比表面积测定等手段对摧化剂进行表征，XRD和SEM测试表明，RU-U-B/ZRO2属于非晶态，活性组分高度分散，XRD结果证实，在加氢过程中，非晶分解，RU晶化；温度愈高，RU晶化愈快，催化剂的活性、选择性与RU微晶的粒径有关，RU微晶粒径应控制在5nm左右，BET比表面积测定表明，ZRO2的负载提高了催化剂的比表面积，从而有利于活性组分的高度分散，并可阻止RU微晶的长大，讨论了B和ZRO2对提高选择性的作用。     

溶剂热还原合成Cr2O3纳米管(英)

Cr₂O₃ nanotubes with diameters of 80 nm and lengths of 550 nm were synthesized in a solvothermal reduction system at 180 ℃. The acetyl acetone (AcAc) and ethylene glycol (EG) were used as the chelate agent and the reductant respectively in the system. An intermediate compound-Cr(Ⅲ)(C₅H₇O₂)₃ was formed to force Cr₂O₃to crystallize along one direction.     

还原温度对超细K－Co－Mo催化剂合成低碳醇性能的影响

 用溶胶－凝胶法合成了K－Co－Mo催化剂．样品经不同温度还原后，用于低碳醇的合成．XRD和HRTEM结果表明，样品是超细粒子，粒子尺寸为2～5nm．考察了催化剂的还原温度和反应条件对催化剂性能的影响．实验结果表明，还原温度对催化剂的活性有较大的影响，最佳还原温度为500℃．最佳反应温度范围为310～330℃．升高压力和空速可以提高醇的收率和选择性．在空速14400h－1，压力6．0MPa和温度310℃的条件下，醇的选择性为55．8％，收率为520．0g／（kg·h），MeOH／C2＋OH为0．27．催化剂稳定性良好，在200h的寿命实验中，活性基本不变．与文献中催化剂相比，超细K－Co－Mo催化剂对合成醇具有较高的活性和选择性，尤其是对C2＋OH的合成明显高于其他合成醇催化剂体系．     

碲氢化钠还原亚胺的方法

本文报道一种还原亚胺的新方法。取代的芳基和脂肪基亚胺可以在较温和的条件下被碲氢化钠顺利地还原为相应的仲胺。