Volatile sulphur compounds in wines related to yeast metabolism and nitrogen composition of grape musts

The influence of nitrogen compounds in grape musts on the content of sulphur compounds of wines was studied. Different vinifications were performed with the addition of methionine (20 mg l⁻¹) and/or cysteine (40 mg l⁻¹) to grape musts before alcoholic fermentation. Six grape musts, with different nitrogen composition, from cultivars of the ‘Vinhos Verdes’ Region, in Portugal, were used. Addition of methionine to grape musts enhanced the content of wines in 3-(methylthio)-1-propanol, acetic acid-3-(methylthio)propyl ester, 3-(methylthio)propionic acid and some unidentified sulphur compounds. Increase of cysteine concentration in musts led to the production of wines with high levels of hydrogen sulphide and cis-2-methyltetrahydro-thiophene-3-OL and also unidentified sulphur compounds; however, the content of 3-(methylthio)propionic acid in the wines decreased considerately with the addition of cysteine to grape musts. This work showed that cultivars from the Vinho Verde Region show different sulphur compound contents. Avesso wines, elaborated from grape musts with low amino acids level, presented the highest total sulphur compounds content. Wines from Azal branco and Alvarinho were characterised by high contents of 4-(methylthio)-1-butanol and 3-(methylthio)propionic acid, respectively. A high content of N-(3-(methylthio) propyl)-acetamide and dimethylsulphone characterise the Loureiro wines. In contrast, Trajadura wines, produced from a must rich in amino acids, presented a low total sulphur compounds content; however, these wines were also characterised by high concentrations of 4-(methylthio)-1-butanol, acetic acid-3-(methylthio)propyl ester and hydrogen sulphide.     

Normal-phase high-performance liquid chromatographic separations using ethoxynonafluorobutane as hexane alternative. II. Liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry applications with methanol gradients

We have reported recently that high-speed normal-phase (NP) HPLC separations of a broad range of organic compounds can be performed on cyano columns using gradients of methanol in hexane-like solvent-ethoxynonafluorobutane (ENFB), available commercially. In this communication, we demonstrate that atmospheric pressure chemical ionization (APCI) in combination with mass spectrometry (MS) can be effectively used for detection in such separations. The efficiency of APCI under conditions studied has also been compared to the efficiency of traditional electrospray ionization (ESI) in combination with MS for reversed-phase (RP) HPLC of the same compounds. The compounds included in this study were steroids, benzodiazepines, and other central nervous system-active substances, nonsteroidal anti-inflammatory drugs, tricyclic antidepressants, and beta-adrenergic blocking agents. Non-polar compounds were found to respond stronger when APCI-MS technique was used, whereas APCI and ESI ionization efficiencies were comparable when polar substances were studied. The combination of normal-phase HPLC separation conditions with mass spectral detection may expand the range of LC-MS applications traditionally associated with reversed-phase HPLC and ESI-MS detection.     

乙醇羰化反应负载型催化剂的研究

本文由七种负载型催化剂中选出两种比较好的乙醇羰化催化剂,研究了影响反应转化率和选择性的因素,考察了活性组份的价态和载体的酸性。此外,还对催化剂进行了能量色散X射线分析。从其结果看,谱图上只有活性中心铑的谱峰而没有氯的谱峰,说明铑是以离子形式进入载体,而不是以化合物形式被吸附于载体上。     

The effect of low concentrations of a polyatomic gas in argon on erosion on copper cathodes in a magnetically rotated arc

Experimental results are presented for electrode erosion on copper cathodes in magnetically rotated arcs in argon, dry air, nitrogen, ammonia, and carbon monoxide as well mixtures of the above with argon. Water-saturated argon was also used. Erosion rates were determined by weight loss after chemical cleaning, and the runs were sufficiently long (between 5 to 60 min) to represent steady-state operation. Arc currents of 100 A and gas pressures of 1.1 atm. were used. Pure argon gave the highest erosion rates and the lowest arc velocities. Small concentrations of any of the diatomic gases in argon greatly increased the arc velocity and decreased the erosion rates. The results suggest that erosion is primarily a thermal phenomenon but that the surface chemistry can greatly influence erosion rates by modifying arc behavior.     

铌酸锂晶体性能的组成依赖性(英文)

总结了铌酸锂晶体的各项性能指标,显示了其对晶体实际组成的强烈依赖性.利用化学键模型定量地解释了这种依赖性产生的根源,从而说明了制约该晶体性能提高的关键因素是晶体结构中的缺陷控制.     

Determining the chromophore in the amylopectin–iodine complex by theoretical and experimental studies

A partial hydrolysis of amylose followed by the addition of iodine provides a spectrum almost identical to that of the amylopectin–iodine (API) complex suggesting the involvement of smaller “amylose-like” units in the API complex. Our theoretical studies on different polyiodine and polyiodide species suggest that a nearly linear I₄ unit stabilized within the cavity of a small “amylose-like” helix is responsible for the characteristic API spectrum. Since there are 2.75 anhydroglucose residues (AGU) for every iodine atom in the amylose–iodine (AI) complex and a structural similarity exists between the API and the AI (amylose–iodine) complexes, we identify (C₆H₁₀O₅)₁₁I₄ to be the chromophore in the API complex. © 1994 John Wiley & Sons, Inc.     

核心素养为本的单元教学设计与实施——以“探究水的组成”为例

以“探究水的组成”教学为例，通过课标、教材及学习者分析，从认识角度、探究水平、认识水平等3个维度整体规划“身边的化学物质”主题单元目标学习进阶，明确“探究水的组成”课时目标，通过温故建模、据模探究、探究推理等3个阶段的教学实施，建立具体物质的研究思路模型，运用模型研究陌生物质（氢气），初步形成定量研究物质组成的能力。     

Use of NIRS technology with a remote reflectance fibre-optic probe for predicting major components in bee pollen

In the present work, we study the use of near infra-red spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for determination of the major components in bee pollen. The method allows immediate control of the bee pollen without prior sample treatment or destruction through direct application of the fibre-optic probe to the sample.The regression method employed was modified partial least squares (MPLS). The calibration results obtained using 45 samples of bee pollen allowed the measurement of protein, moisture, ash, reducing sugars, and pH with multiple correlation coefficients (RSQ) and prediction corrected standard errors (SEPC) of 0.91, 0.56% for protein, of 0.78 and 0.49% for moisture; 0.92 and 0.049% for ash; 0.81 and 1.32 g of glucose/100 g of bee pollen; 0.84 and 0.15 for pH, respectively.The prediction capacity of the pattern was checked by applying it to samples of unknown pollen in external validation.     

Analysis of Essential Oil from the Needles of <Emphasis Type="Italic">Pinus pinaster</Emphasis> Growing in Algeria

The needle oil of the Algerian maritime pine (Pinus pinaster Ait.) growing in natural habitats in Sidi Feradj (Algiers region) was obtained by hydrodistillation in 0.3% yield and analyzed by GC and GC/MS. More than 46 compounds amounting to 65.2% of the total oil were identified. The main components were β-caryophyllene (26.6%), allo-aromadendrene (12.5%), and α-humulene (4.3%). __________ Published in Kimiya Prirodnikh Soedinenii, No. 5, pp. 445–447, September–October, 2005.     

High solids content emulsion terpolymerization of vinyl acetate,methyl methacrylate and butyl acrylate. II. Open loop composition control

A method for the calculation of the optimal monomer addition policies for polymer composition control in emulsion terpolymerization is developed. The method is applied to reactors with and without limited heat removal capacity. A mathematical model that incorporates the main features of the vinyl acetate/methyl methacrylate/butyl acrylate high solids content emulsion terpolymerization system allows the calculation of the composition of the initial charge of the reactor and the time-dependent monomer addition rates required. © 1994 John Wiley & Sons, Inc.