基于量纲分析和达西定律的地下化学爆炸气体泄漏规律

针对周围是均匀岩石介质的地下化学爆炸,研究爆炸后爆室内气体的泄漏规律.利用量纲分析,得到影响气体泄漏时间的主要物理量,包括气体动力学粘度、爆室内超压、围岩孔隙率及围岩厚度的平方与渗透率的比值等,并初步给出它们之间的函数关系.然后基于达西定律,推导计算气体泄漏时间的解析公式.得到的气体泄漏时间计算公式与通过量纲分析得到的定性函数关系式完全相符,二者从不同的角度对同一问题给出了相容的结果.可为地下化学爆炸气体泄漏的理论分析和规律性研究提供研究思路和工具,为地下爆炸有关的工程估算提供参考依据.     

Impact of Linear Operator on the Convergence of HAM Solution: A Modified Operator Approach

The linear operator plays an important role in the computational process of Homotopy Analysis Method (HAM). In HAM frame any kind of linear operator can be chosen to develop a solution. Hence, it is easy to introduce the modified/physical parameter dependent linear operators. The effective use of these operators has been judged through solving fluid flow problems. Modification in linear operators affects the solution and improves the computational efficiency of HAM for larger values of parameters. The convergence rate of the solution is rapid and several times higher resulting in less computational time.     

利用混合FE-SEA方法的前围隔声性能优化设计*

为了提升某重型商用车前围的隔声性能,建立了用于分析前围传递损失的有限元-统计能量分析(FE-SEA)模型。针对前围结构复杂的特点,依据FE-SEA模型建模原则,提出了通过在表面创建声腔来确保能量在模型中的正确传递路径。将仿真结果与测试值对比,二者误差小于1.6 dB(A),验证了FE-SEA方法的准确性。用吸声材料与隔声材料复合设计前围声学包,采用正交试验法对前围声学包进行优化设计并对各个试验方案进行仿真计算。对仿真结果进行极差分析与方差分析,选出了在传递损失、重量和厚度三方面达到最佳平衡的声学包:毛毡(10 mm)+EPDM隔声垫(2 mm)。结果表明,优化后的前围传递损失在测试频率315 Hz～2000 Hz范围内最小提升了3.8 dB(A),最大提升了7 dB(A),前围的隔声性能得到较大的提升。     

An Algorithm for the Global Optimization of a Class of Continuous Minimax Problems

We propose an algorithm for the global optimization of continuous minimax problems involving polynomials. The method can be described as a discretization approach to the well known semi-infinite formulation of the problem. We proceed by approximating the infinite number of constraints using tools and techniques from semidefinite programming. We then show that, under appropriate conditions, the SDP approximation converges to the globally optimal solution of the problem. We also discuss the numerical performance of the method on some test problems. Financial support of EPSRC Grant GR/T02560/01 gratefully acknowledged.     

Spectral methods for pantograph-type differential and integral equations with multiple delays

We analyze the convergence properties of the spectral method when used to approximate smooth solutions of delay differential or integral equations with two or more vanishing delays. It is shown that for the pantograph-type functional equations the spectral methods yield the familiar exponential order of convergence. Various numerical examples are used to illustrate these results.      

我国工业污染分布状况研究

环境污染越来越受到我国的重视,而工业污染是造成环境污染的重要原因.为了对我国的环境污染分布状况进行深入了解,从总量出发,利用聚类分析和因子分析法分析了我国工业污染的分布情况,并探讨了各类地区工业污染差异的原因,为我国进行侧重点治理环境污染提出可行性建议.     

偏心和倾斜光学系统的像差特性

运用一种新的分析偏心和倾斜光学系统初级像差特性的方法—矢量像差理论,分析了具有较大交叉倾斜角的平行平板光学系统和具有较大倾斜角的光楔光学系统的像差特性.通过ZEMAX光学设计软件像差分析功能中的垂轴像差曲线、场曲曲线和点列图加以比较,两者非常吻合,证明该理论可以对具有较大倾斜元件的非共轴光学系统设计起指导作用.     

不同窑口古代青瓷的产地特征的中子活化分析

产地属性是科学鉴别遗址和墓葬中出土的古陶瓷烧制产地的重要依据.用仪器中子活化（INAA）有损分析了浙江寺龙口越窑、江西洪州窑和陕西耀州窑出土的古瓷碎片样品,通过实验数据的统计分析,结果表明3个窑口古瓷的元素组成具有各自的特征,它们之间具有可以区分的依据,寺龙口越窑与南方江西洪州窑的制胎原料关系较近,与北方陕西耀州窑的关系较远.这些试验结果将为古陶瓷地研究提供重要参数.Provenance characteristic is an important scientific parameter to identify ancient porcelain wares unearthed from sites and graves.The porcelain samples of Si Long Kou kiln of Zhejiang Province,Hong Zhou kiln of Jiangxi Province and Yao Zhou kiln of Shanxi Province have been analyzed with neutron activation analysis(NAA) in this paper.The experimental data were studied with statistic methods.The results show that the chemical compositions of porcelain body samples for three kilns were different. The difference was been able identified. The body materials of both Si Long Kou Yue kiln and Hong Zhou kiln of Jiangxi were similar. The samples of Yao Zhou kiln in north of China existed obvious difference.     

Domain decomposition preconditioners for multiscale problems in linear elasticity

We analyze two‐level overlapping Schwarz domain decomposition methods for vector‐valued piecewise linear finite element discretizations of the PDE system of linear elasticity. The focus of our study lies in the application to compressible, particle‐reinforced composites in 3D with large jumps in their material coefficients. We present coefficient‐explicit bounds for the condition number of the two‐level additive Schwarz preconditioned linear system. Thereby, we do not require that the coefficients are resolved by the coarse mesh. The bounds show a dependence of the condition number on the energy of the coarse basis functions, the coarse mesh, and the overlap parameters, as well as the coefficient variation. Similar estimates have been developed for scalar elliptic PDEs by Graham et al. 1 The coarse spaces to which they apply here are assumed to contain the rigid body modes and can be considered as generalizations of the space of piecewise linear vector‐valued functions on a coarse triangulation. The developed estimates provide a concept for the construction of coarse spaces, which can lead to preconditioners that are robust with respect to high contrasts in Young's modulus and the Poisson ratio of the underlying composite. To confirm the sharpness of the theoretical findings, we present numerical results in 3D using vector‐valued linear, multiscale finite element and energy‐minimizing coarse spaces. The theory is not restricted to the isotropic (Lamé) case, extends to the full‐tensor case, and allows applications to multiphase materials with anisotropic constituents in two and three spatial dimensions. However, the bounds will depend on the ratio of largest to smallest eigenvalue of the elasticity tensor.