亲水头基大小对正负离子表面活性剂混合体系的影响

<正>负离子表面活性剂混合体系曾被认为是表面活性剂配方的禁忌,但通过增大表面活性剂头基的面积,正负混合体系在很宽的物质的量比下都不会产生沉淀,而且还会产生显著的增效效应。头基大的离子型表面活性剂甚至能够用来增溶难溶的反电荷表面活性剂。     

伪可变体系的几何构造分析

伪可变体系几何可变性的研究，对轻型结构的设计分析已变得十分重要。本文先分析能量与平衡之间的普遍关系，进而得出判定体系可变性的能量准则。通过拉格朗日乘子的引入，建立能量泛函，得出判定极值的二次型。然后证明了乘积力法与能量法的一致性，并讨论了宜于计算机分析实现的矩阵表示方法。结果表明，若二次型确定，则体系伪可变；当半确定时，体系部分伪可变部分可变；否则体系含二阶以上的无穷小机构。     

Extraction-condensation method for solving large sets of equations in FE analysis

In static and dynamic analysis of a large complex structure, one may merely be interested in the stresses and displacements at some important locations. A new solution technique for structural analysis with FEM is proposed in this paper by which those important unknowns are separated from the rest. In static analysis the important unknows can be found directly. In dynamic analysis all mass and exciting forces can be condensed onto a small number of predetermined points in order to make the dynamic analysis much simplified. A large scale problem can be solved with a small capacity computer quickly.     

Multi-Stage Upscaling: Selection of Suitable Methods

Reservoirs are often composed of an assortment of rock types giving rise to permeability heterogeneities at a variety of length-scales. To predict fluid flow at the full-field scale, it is necessary to be aware of these different types of heterogeneity, to recognise which are likely to have important effects on fluid flow, and to capture them by upscaling. In fact, we may require a series of stages of upscaling to go from small-scales (mm or cm) to a full-field model. When there are two (or more) phases present, we also need to know how these heterogeneities interact with fluid forces (capillary, viscous and gravity). We discuss how these effects may be taken into account by upscaling. This study focusses on the effects of steady-state upscaling for viscous-dominated floods and tests carried out on a range of 2D models are described. Upscaling errors are shown to be reduced slightly by the increase in numerical dispersion at the coarse scale. We select a combination of three different upscaling methods, and apply this approach to a model of a North Sea oil reservoir in a deep marine environment. Six different genetic units (rock types) were identified, including channel sandstone and inter-bedded sandstone and mudstone. These units were modelled using different approaches, depending on the nature of the heterogeneities. Our results show that the importance of small-scale heterogeneity depends on the large-scale distribution of the rock types. Upscaling may not be worthwhile in sparsely distributed genetic units. However, it is important in the dominant rock type, especially if there is good connectivity through the unit between the injector wells (or aquifer) and the producer wells.This revised version was published online in May 2005. In the previous version one of the authors name was missing.     

求解弹性梁的普遍化方法

介绍了一种求解弹性梁的新方法．该方法利用奇异函数与拉普拉斯变换相结合的方法导出弹性梁弯曲变形的普遍表达式，并利用边界条件确定约束力，对具有任意支承形式、受力状况和阶梯形状的静定或超静定梁具有普适性．     

Dynamics of a Rigid Unbalanced Rotor with Nonlinear Elastic Restoring Forces. Part I: Theoretical Analysis

In a previous paper, the dynamic behaviour of a Jeffcott rotor was studied in the presence of pure static unbalance and nonlinear elastic restoring forces. The present paper extends the analysis to a rigid rotor with an axial length such as to make the transverse moment of inertia greater than the axial one. As in the previous investigation, the elastic restoring forces are assumed to be nonlinear and the effects of couple unbalance are also included but, unlike the Jeffcott rotor, the system exhibits six degrees-of-freedom. The Lagrangian coordinates were fixed so as to coincide with the three coordinates of the centre of mass of the rotor and the three angular coordinates needed in order to express the rotor's rotations with respect to a reference frame having its origin in the centre of mass. The precession motions of such a rotor turn out to be cylindrical at low angular speeds and exhibit a conical aspect when operating at higher speeds. The motion equations of the rotor were written with reference to a system that was subsequently adopted for the experimental analysis. The particular feature of this system was the use of a steel wire (piano wire) for the rotor shaft, suitably constrained and with the possibility of regulating the tension of the wire itself, in order to increase or reduce the nonlinear character of the system. The numerical analysis performed with integration of the motion equations made it possible to point out that chaotic solutions were manifested only when the tension in the wire was given the lowest values – i.e. when the system was strongly nonlinear – in the presence of considerable damping and rotor unbalance values that were so high as to lose any practical significance. Under conditions commonly shared by analogous real systems characterised by poor damping, where the contribution to nonlinearity is almost entirely due to elastic restoring forces, the analysis pointed out that precession motions may be manifested with a periodic character, whether synchronous or not, or a quasi-periodic character, but in no case is the solution chaotic.     

斜面结构冰荷载的动荷效应

利用改进的刚性梁模型进行了斜面结构冰荷载的动荷效应，推导了冰力的动荷系统，算例得到了与模型试验值和数值解相近的结果，依据分析对试验观察到的规律给出了理论上的证明和定性的解释，给出了准静态冰力条件的判别式。     

Application of material forces to fracture of inhomogeneous materials: illustrative examples

The material forces concept has become an elegant tool in continuum mechanics for the calculation of the thermodynamic driving force of a defect. Based on this concept, we have recently shown that inhomogeneities essentially shield or anti-shield crack tips from applied far-field stresses. The goal of this paper is to illustrate this by considering the model example of a crack in a CT-type specimen that contains a bimaterial interface. The crack driving force is calculated as the sum of the far-field driving force and the crack-tip shielding or anti-shielding. Several cases of inhomogeneity in either thermal or elastic properties are considered. Rather simple hand calculations are provided in addition to numerical results to illustrate the advantages of using the material forces concept.     

On an attempt to simplify the Quartapelle–Napolitano approach to computation of hydrodynamic forces in open flows

In this paper we are interested in the Quartapelle–Napolitano approach to calculation of forces in viscous incompressible flows in exterior domains. We study the possibility of deriving a simpler formulation of this approach which might lead to a more convenient expression for the hydrodynamic force, but conclude that such a simplification is, within the family of approaches considered, impossible. This shows that the original Quartapelle–Napolitano formula is in fact “optimal” within this class of approaches.