Protein nanotubes comprised of an alternate layer-by-layer assembly using a polycation as an electrostatic glue

We present the synthesis and structure of various protein nanotubes comprised of an alternate layer-by-layer (LbL) assembly using a polycation as an electrostatic glue. The nanotubes were fabricated by sequential LbL depositions of positively charged polycations and negatively charged proteins into a porous polycarbonate (PC) membrane, followed by release of the cylindrical core by quick dissolution of the template with CH(2)Cl(2). This procedure provides a variety of protein nanotubes without interlayer cross-linking. The three-cycle depositions of poly-L-arginine (PLA) and human serum albumin (HSA, M(w)=66.5 kDa) into the porous PC template (pore diameter, D(p)=400 nm) yielded well-defined (PLA/HSA)(3) nanotubes with an outer diameter of 419+/-29 nm and a wall thickness of 46+/-8 nm, revealed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. The outer diameter of the tubules can be controlled by the pore size of the template (200-800 nm), whereas the wall thickness is always constant, independent of the D(p) value. The (PEI/HSA)(3) (PEI: polyethylenimine) nanotubes showed a slightly thin wall of 39+/-5 nm. CD spectra of the multilayered (PEI/HSA)(n) film on a flat quartz plate suggested that the secondary structure of HSA between the polycations was almost the same as that in aqueous solution. The three-cycle LbL depositions of PLA and ferritin (M(w)=460 kDa) or myoglobin (Mb, M(w)=1.7 kDa) into the porous PC membrane also gave cylindrical hollow structures. The wall thickness of the (PLA/ferritin)(3) and (PLA/Mb)(3) nanotubes were 55+/-5 nm and 31+/-4 nm; it depends on the globular size of the protein (ferritin>HSA>Mb). The individual ferritin molecule was clearly seen in the tubular walls by SEM and TEM measurements.     

Novel single-crystal-to-single-crystal anion exchange and self-assembly of luminescent d(10) metal (Cd(II), Zn(II), and Cu(I)) complexes containing C(3)-symmetrical ligands

Ligands L1 and L2' (L1=N,N',N'-tris(4-pyridyl)trimesic amide, L2'=N,N',N'-tris(3-pyridinyl)-1,3,5-benzenetricarboxamide) belonging to an interesting family of tripyridyltriamides with C(3)-symmetry have been utilized to construct 3D porous or hydrogen-bonded frameworks. Through a novel single-crystal-to-single-crystal anion-exchange process, [Cd(L1)(2)(ClO(4))(2)](n) (1c) can be obtained from [Cd(L1)(2)Cl(2)](n) (1b) in the presence of ClO(4)(-) anions. This anion-exchange process is highly selective and only the substitution of Cl(-) by ClO(4)(-) or PF(6)(-) could be realized; Cl(-) was found not to be substituted by BPh(4)(-). This demonstrates that the exchange process depends on the size of the anions in relation to the size of the cavities in the host material (ca. 7.5 A). In addition, the anion-exchange properties of 1 b have also been investigated by means of powder X-ray diffraction (PXRD), elemental analysis (EA), and infrared absorption spectroscopy (IR). Structurally, [Zn(L1)(NO(3))(2)](n)(2) consists of a 2D coordination network with five-coordinate Zn(II) ions. Surprisingly, different trigonal-bipyramidal Zn(II) ions propagate to form distinct respective sheet structures, A and B, which are packed in an A-B-A-B manner in the crystal lattice, and these are hydrogen-bonded to give a 3D extended framework. The molecular structure of [CuI(L2')](n)(3) shows that the Cu(I) ion adopts a distorted tetrahedral geometry, and 3 also forms a 2D coordination network. Significantly, this 2D coordination network is further assembled into a remarkable 3D homochiral framework through triple hydrogen bonding and pi...pi interactions. All of these 3D coordination polymers and/or hydrogen-bonded frameworks are luminescent in the solid state, and their solid-state luminescent properties have been investigated at room temperature and/or at 77 K.     

Formation of 1 D and 3 D coordination polymers in the solid state induced by mechanochemical and annealing treatments: bis(3-cyano-pentane-2,4-dionato) metal complexes

Bis(3-cyano-pentane-2,4-dionato) (CNacac) metal complex, [M(CNacac)(2)], which acts as both a metal-ion-like and a ligand-like building unit, forms supramolecular structures by self-assembly. Co-grinding of the metal acetates of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) with CNacacH formed a CNacac complex in all cases: mononuclear complex was formed in the cases of Mn(II), Cu(II) and Zn(II), whereas polymeric ones were formed in the cases of Fe(II), Co(II) and Ni(II). Subsequent annealing converted the mononuclear complexes of Mn(II), Cu(II) and Zn(II) to their corresponding polymers as a result of dehydration of the mononuclear complexes. The resultant Mn(II), Fe(II), Co(II), Ni(II) and Zn(II) polymeric complexes had a common 3 D structure with high thermal stability. In the case of Cu(II), a 1 D polymer was obtained. The Mn(II), Cu(II) and Zn(II) polymeric complexes returned to their original mononuclear complexes on exposure to water vapour but they reverted to the polymeric complexes by re-annealing. Co-grinding of metal chlorides with CNacacH and annealing of the mononuclear CNacac complexes prepared from solution reactions were also examined for comparison. [Mn(CNacac)(2)(H(2)O)(2)], [M(CNacac)(2)(H(2)O)] (M=Cu(II) and Zn(II)) and [M(CNacac)(2)](infinity) (M=Mn(II), Fe(II) and Zn(II)) are new compounds, which clearly indicated the power of the combined mechanochemical/annealing method for the synthesis of varied metal coordination complexes.     

Control of aqueous droplets using magnetic and electrostatic forces

Basic control operations were successfully performed on an aqueous droplet using both magnetic and electrostatic forces. In our droplet-based microfluidics, magnetic beads were incorporated in an aqueous droplet as a force mediator. This report describes droplet anchoring and separation of the beads from the droplet using a combination of magnetic and electrostatic forces. When an aqueous droplet is placed in an oil-filled reservoir, the droplet sinks to the bottom, under which an electrode had been placed. The droplet was adsorbed (or anchored) to the bottom surface on the electrode when a DC voltage was applied to the electrode. The magnetic beads were removed with magnetic force after the droplet had been anchored. Surfactant addition into droplet solution was very effective for the elimination of electric charge, which resulted in the stable adsorption of a droplet to hydrophobic substrate under an applied voltage of DC 0.5-3 kV. In a sequential process, small volume of aqueous liquid was successfully transferred using both magnetic and electrostatic forces.     

Development of polyelectrolyte multilayer-coated electrospun cellulose acetate fiber mat as composite membranes

Electrostatic multilayers of chitosan (CHI)/sodium alginate (SA) and CHI/poly(styrene sulfonate) sodium salt (PSS) were alternatively coated on electrospun cellulose acetate (CA) fiber mat. Morphologies of the composite membranes were characterized by scanning electron microscopy. The morphology of the CHI/SA-coated membrane was denser than the CHI/PSS-coated one. The top layers consisted of carboxyl and sulfonic functional groups for SA and PSS layers, respectively. Amino groups of CHI were only presented in slight quantity. X-ray photoelectron spectroscopy (XPS) confirmed the deposition of the amino groups of CHI on the multilayer membrane surface. These composite membranes were characterized for its water permeability where the water flux decreased with an increase in the number of the bilayers. The water flux was in the range of 60 and 40 L m⁻² h⁻¹ for 15 and 25 bilayered membranes, respectively. The sodium chloride (NaCl) solution flux was lower than the pure water flux due to the effect of osmotic pressure, and it decreased with an increase in the NaCl concentration. The rejection of NaCl increased substantially with the number of the bilayers of the polyelectrolytes multilayers. The level of NaCl rejection from this work was in the range of 6% and 15% for 15 and 25 bilayered membranes, respectively.     

Assembled Organoruthenium(II) for Formaldehyde Decomposition and Hydrogen Production

Formaldehyde decomposition is not only an attractive method for hydrogen production, but also a potential approach for gaseous formaldehyde removal. In this research, we prepare some assembled organoruthenium through coordination reaction between Ru(p-Cymene)Cl₂ and bridge-linking ligands. It is a creative approach for Ru(p-Cymene)Cl₂ conversion into heterogeneous particles. The rigidity of bridge-linking ligand enables assembled organoruthenium to have highly ordered crystalline structure, even show clear crystal lattice with spacing of 0.19 nm. XPS shows the N−Ru bond are formed between bridge-linking ligand and Ru(p-Cymene)Cl₂. The assembled organoruthenium has high abundant active sites for formaldehyde decomposition at low temperature. The reaction rate could increase linearly with temperature and formaldehyde concentration, with a TOF of 2420 h⁻¹ at 90 °C. It is promising for gaseous formaldehyde decomposition in wet air or nitrogen. Formaldehyde conversion is up to 95 % over Ru-DAPM is 4,4′-diaminodiphenylmethane at 90 °C in air. Gaseous formaldehyde decomposition is a two-steps process under oxygen-free condition. Firstly, formaldehyde dissolve in water, and be converted into hydrogen and formic acid through formaldehyde-water shift reaction. Then intermediate formic acid will further decompose into hydrogen and carbon dioxide. We also find formaldehyde decomposition is a synergetic catalysis process of oxygen and water in moist air. Oxygen is conducive to formic acid desorption and decomposition on the active sites, so assembled organoruthenium exhibit slightly higher conversion for formaldehyde decomposition in moist air. This work proposes a distinctive method for gaseous formaldehyde decomposition in the air, which is entirely different from formaldehyde photocatalysis or thermocatalysis oxidation.     

Electrical characteristics of electrostatic precipitator with a wet membrane-based collecting electrode

Electrostatic precipitators (ESPs) with the wet membrane-based collecting electrode play an important role on the flue gas cleaning process. However, the mechanism researches on the excellent collection efficiency of the membrane-based ESPs are insufficient. This paper aims at characterizing the excellent collection efficiency of the ESPs in the aspect of the electrical characteristics. The discharge current density and distribution of the metal and wet membranes collecting electrode were measured using the boundary probe method under different conditions. The differences of the discharge current density and distribution between the wet membranes collecting electrode and the metal one were discussed in detail. In addition, the effects of applied voltage, distance between the electrodes and discharge electrode construction on the difference of the discharge current density between the wet membranes electrode and the metal one were also presented. The results show that the discharge current density is strongly increased by the wet membranes electrode, the increased discharge current density is the main reason for the excellent collection efficiency of the membrane-based WESPs.     

Anion Directed Self‐Assembly of One‐Dimensional and Two‐Dimensional Coordination Polymers Containing Bridging Diphosphine Ligands

The reactions of 1,2‐bis(diphenylphosphanyl)ethane (dppe) with different silver(I) salts facilitated the formation of 1D and 2D coordination polymers, [Ag(dppe)(OAc)]_n · nH₂O ( 1 ) and [Ag₂(dppe)_1.5(NO₃)₂]_n ( 2 ), respectively. The complexes were characterized by elemental analysis, ATR‐IR spectroscopy, ¹H NMR, ¹³C NMR, and ³¹P NMR spectroscopy, and single‐crystal X‐ray diffraction. Structural analysis revealed that complex 1 exhibits a 1D infinite wavy structure, in which each silver(I) ion is bridged by dppe ligands. Structure 2 has a 2D topologically promising architecture that displays a 6.6.6 graphitic net, which corresponds to hnd topology. The nitrate ions and dppe ligands are in a μ₂ bridging mode and support the formation of this net. Moreover, significant π–π interactions between the phenyl rings in the apertures of (6,3) grid stabilized complex 2 .     

Sodium chloride's effect on self‐assembly of diphenylalanine bilayer

Understanding self‐assembling peptides becomes essential in nanotechnology, thereby providing a bottom‐up method for fabrication of nanostructures. Diphenylalanine constitutes an outstanding building block that can be assembled into various nanostructures, including two‐dimensional bilayers or nanotubes, exhibiting superb mechanical properties. It is known that the effect of the ions is critical in conformational and chemical interactions of bilayers or membranes. In this study, we analyzed the effect of sodium chloride on diphenylalanine bilayer using coarse‐grained molecular dynamics simulations, and calculated the bending Young's modulus and the torsional modulus by applying normal modal analysis using an elastic network model. The results showed that sodium chloride dramatically increases the assembling efficiency and stability, thereby promising to allow the precise design and control of the fabrication process and properties of bio‐inspired materials. © 2016 Wiley Periodicals, Inc.     

Photoinduced Processes of Supramolecular Nanoarrays Composed of Porphyrin and Benzo[ghi]perylenetriimide Units through Triple Hydrogen Bonds with One‐Dimensional Columnar Phases

One‐dimensional supramolecular columnar phases composed of porphyrins (electron donor: D) and benzo[ghi]perylenetriimides (electron acceptor: A) through triple hydrogen bonds have been successfully constructed to perform sequential light‐harvesting and electron‐transfer processes. A series of benzo[ghi]peryleneimide derivatives have been synthesized to examine the substituent effects such as imide and nitrile groups on the spectroscopic and electrochemical properties. Then, formation of the 1:1 supramolecular complex between zinc porphyrin and benzo[ghi]perylenetriimide derivatives through triple hydrogen bonds was confirmed by Job's plot of ¹H NMR titration. Next, the one‐dimensional supramolecular nanoarrays were successfully prepared in a mixed solvent. X‐ray diffraction (XRD) measurement suggested that these nanoarrays contained one‐dimensional columnar phases composed of stacked donor and acceptor layers. Finally, femtosecond transient absorption and electron spin resonance (ESR) measurements clearly indicated that photoinduced electron transfer occurred via the singlet excited states in the supramolecular columns.