Theoretical Study on Dissociation Potential Energy Surface of Peroxynitric Acid

The lowest energy structures of peroxynitric acid have been studied with B3LYP/6-311+ G(2d,2p) method. The potential energy surfaces (PES) along the O-N and O-Obonds have been scanned at CCSD(T)/aug-cc-pVDZ level, respectively. The calculated results show that on the O-N PES, the O3-N4 bond length of the loose transition state is 2.82 ? and the corresponding energy barrier is 25.6 kcal/mol, while on the O-O PES, the loose transition state with of O2-O3 bond length of 2.35 ? has the energy barrier of 37.4 kcal/mol. Thus the primary reaction path for peroxynitric acid is the dissociation into HO₂ and NO₂.     

La0.8Sr0.2Ga0.8Mg0.2O3与La0.8Sr0.2Ga0.8Mg0.15Co0.05O3电导的对比

采用固相合成法制备了La0.8Sr0.2Ga0.8Mg0.2O3(LSGM8282)和La0.8Sr0.2Ga0.8Mg0.15Co0.05O3 (LSGMC5), 利用四电极交流阻抗法和Hebb-Wagner 极化法对比研究了两种材料的总电导率和电子电导率. 实验结果表明, LSGM8282 的总电导率与氧分压无明显依赖关系, 而LSGMC5 的总电导率在高氧分压区随氧分压降低而增加,在中等氧分压区域基本保持不变. 在973-1173 K的温度范围内, LSGM8282的自由电子电导率以及电子空穴电导率的氧分压级数分别为-1/4和1/4.在1073-1173 K的温度范围内, LSGMC5的自由电子电导率以及电子空穴电导率的氧分压级数分别为-1/4和约为1/8, 表明LSGMC5的空穴产生机制可能与LSGM8282不同. LSGM8282 的氧离子电导率与氧分压无关, 而LSGMC5 的氧离子电导率在高氧分压区随氧分压的减小而增加.     

脲醛树脂合成反应过程的FTIR研究

利用傅里叶变换红外(FTIR)光谱研究了脲醛树脂合成中不同结构形成和变化情况. 对FTIR谱图解析和分析的结果表明, 在脲醛树脂预聚物合成过程中, 随着甲醛与尿素反应的进行, 红外谱图特征峰发生有规律的变化, 酰胺II带特征峰波数逐渐低移, 有更多羟甲基、醚键和—NHCH2—结构基元形成, 固化反应使上述结构基元相应减少. 着重分析了不同甲醛与尿素摩尔比(nF/nU)下尿素与甲醛反应产物结构的变化, 随nF/nU的增加, 酰胺II带特征峰波数逐渐低移, 碱性条件下醚键和—NHCH2—结构基元明显增加, 在较强酸性条件下Uron环、亚甲基桥和羟甲基显著增加, 而—NHCH2—结构基元含量下降.     

反式和顺式HOOOH的电子光谱的理论研究

用密度泛函方法(DFT)和全活化空间自洽场方法(CASSCF)以及耦合簇理论(CCSD)优化了反式和顺式HOOOH的平衡几何构型, 用DFT计算了HOOOH顺反异构化反应的势能曲线和谐振动频率. 用含时密度泛函理论(TD-DFT)和二阶全活化空间微扰理论(CASPT2)计算了反式和顺式HOOOH垂直激发能. 计算结果表明: (1)反式异构体比顺式异构体稳定; (2)两种稳定构型的异构化反应有两种路径; (3)对于垂直跃迁能最低的单态和叁态, 反式的垂直跃迁能比顺式的低; (4)在单激发态中, CASPT2方法预测的顺式HOOOH寿命最长的激发态为21A′′, 其跃迁能是167.43 nm, 寿命为 1.44×10−5 s; 反式HOOOH寿命最长的激发态为21A, 其跃迁能是165.52 nm, 寿命为 2.07×10−5 s.     

一个各向异性磁稀释杂化钙钛矿系列[CH3NH3][CoxZn1-x(HCOO)3]

Inorganic-organic or hybrid perovskite materials, which are the complementary counterparts of pure inorganic perovskites, can provide many new opportunities in the researches of phase transitions, critical phenomena, and relevant properties, as they combine the characteristics of inorganic and organic components. Therefore, the hybrid perovskites of ammonium metal formate framework are very promising, and their properties have been found to be strongly dependent on the characteristics of the constituent metal ions and/or ammonium ions. Herein, we used solid solution strategies, borrowed from solid state chemistry, to investigate the anisotropic diluted magnetic hybrid perovskite system of [CH₃NH₃][Co_xZn_1-x(HCOO)₃], wherein the B-sites are occupied by the mixed metal ions of Co²⁺ and Zn²⁺. The solid solution compounds of this series in the range x = 0–1 (or the molar percent Co% = 0–100%) were successfully prepared using conventional solution chemistry methods. The resulting compounds were demonstrated to be iso-structural by using both single-crystal and powder X-ray diffraction analyses. The solid solution crystals belong to the orthorhombic space group Pnma, with the cell parameters being a = 8.3015(2)–8.3207(3) Å, b = 11.6574(4)–11.6811(5) Å, c = 8.1315(3)–8.1427(4) Å, and V = 787.89(5)–790.98(7) ų. The perovskite structure consists of a simple cubic anionic metal-formate framework and CH₃NH₃⁺ cations which are located in the framework cavities, with N―H···O hydrogen bonds formed between the framework and the cation. The members of this series showed negligible changes (< 0.4%) in their respective lattice and structural parameters. Thus, the prepared solid solution compounds constitute good molecule-based examples for the study of magnetic dilution under almost the same structural parameters and molecular geometries. Upon dilution, the magnetization per mole of Co at low temperatures and low fields was suppressed by the magnetic anisotropy of Co²⁺ and gradual destruction of the large spin canting between coupled Co²⁺ ions, in contrast to the magnetization enhancement observed in the isotropic diluted system of [CH₃NH₃][Mn_xZn_1-x(HCOO)₃] with the same perovskite structure. The percolation limit was estimated as (Co%)_P = 27(1)% (or x_P = 0.27(1)) from the magnetic data, which was slightly lower than that predicted by the percolation theory for a simple cubic lattice (31%); this trend was due to the strong magnetic anisotropy of the present system. In addition, rare incommensurate phase transitions were primarily detected below ~120 K for the pure Co and Zn members, which may also affect the magnetic properties of the materials.     

常见客体分子对笼型水合物晶格常数的影响

Natural gas hydrates are considered as ideal alternative energy resources for the future, and the relevant basic and applied research has become more attractive in recent years. The influence of guest molecules on the hydrate crystal lattice parameters is of great significances to the understanding of hydrate structural characteristics, hydrate formation/decomposition mechanisms, and phase stability behaviors. In this study, we test a series of artificial hydrate samples containing different guest molecules (e.g. methane, ethane, propane, iso-butane, carbon dioxide, tetrahydrofuran, methane + 2, 2-dimethylbutane, and methane + methyl cyclohexane) by a low-temperature powder X-ray diffraction (PXRD). Results show that PXRD effectively elucidates structural characteristics of the natural gas hydrate samples, including crystal lattice parameters and structure types. The relationships between guest molecule sizes and crystal lattice parameters reveal that different guest molecules have different controlling behaviors on the hydrate types and crystal lattice constants. First, a positive correlation between the lattice constants and the van der Waals diameters of homologous hydrocarbon gases was observed in the single-guest-component hydrates. Small hydrocarbon homologous gases, such as methane and ethane, tended to form sI hydrates, whereas relatively larger molecules, such as propane and iso-butane, generated sⅡ hydrates. The hydrate crystal lattice constants increased with increasing guest molecule size. The types of hydrates composed of oxygen-containing guest molecules (such as CO₂ and THF) were also controlled by the van der Waals diameters. However, no positive correlation between the lattice constants and the van der Waals diameters of guest molecules in hydrocarbon hydrates was observed for CO₂ hydrate and THF hydrate, probably due to the special interactions between the guest oxygen atoms and hydrate "cages". Furthermore, the influences of the macromolecules and auxiliary small molecules on the lengths of the different crystal axes of the sH hydrates showed inverse trends. Compared to the methane + 2, 2-dimethylbutane hydrate sample, the length of the a-axis direction of the methane + methyl cyclohexane hydrate sample was slightly smaller, whereas the length of the c-axis direction was slightly longer. The crystal a-axis length of the sH hydrate sample formed with nitrogen molecules was slightly longer, whereas the c-axis was shorter than that of the methane + 2, 2-dimethylbutane hydrate sample at the same temperature.     

Nanostructured Ni/Ti_3C_2T_x MXene hybrid as cathode for lithium-oxygen battery

Ti_3C_2 belongs to MXenes family,which is a new two-dimensional material and has been applied in many fields.With simple method of hydrothermal and high temperature calcination,nano structured Ni/Ti_3C_2T_x hybrid was synthesized.The stable layer structure of Ti_3C_2 MXene providing high surface area as well as excellent electronic conductivity are beneficial for deposition and decomposition of discharge product Li_2O_2.Furthermore,possessing special catalytic activity,Ni nanoparticles with size of about 20 nm could accelerate Li_2O_2 breaking down.Taking advantage of two kinds of materials,Ni/Ti_3C_2T_x hybrid as cathode of Li-O_2 battery can achieve a maximal specific capacity of 20,264 mAh/g in 100 mA/g and 10,699 mAh/g in 500 mA/g at the first cycle.This work confirms that the prepared Ni/Ti_3C_2T_x hybrid exhibiting better cycling stability points out a new guideline to improve the electrochemical performance of lithium-oxygen batteries.     

Synthesis and structural investigation of mono- and polynuclear copper complexes of 4-ethyl-1-(pyridin-2-yl) thiosemicarbazide

The reaction between 2-hydrazinopyridine and ethylisothiocyanate produced 4-ethyl-1-(pyridin-2-yl) thiosemicarbazide (HEPTS). Its reaction with copper fluoride, chloride, bromide, acetate, nitrate, perchlorate, sulfate, carbonate, hydroxide and copper metal produced 15 Cu(II) complexes. The copper metal is easily oxidized in aqueous-ethanol solution of HEPTS giving [Cu(2)(EPTS)(H(2)O)(3)(OH)(3)]EtOH. Different complexes for the same anion were synthesized by controlling the heating time. Characterization by elemental, thermal, magnetic and spectral (electronic, IR, mass and ESR) studies showed the formation of mono-, di-, tri- and tetra nuclear complexes. The room temperature solid state ESR spectra of the complexes show an axial spectrum with d(x)(2)-y(2) ground state, suggesting distorted tetragonal geometry around Cu(II) center. The kinetic and thermodynamic parameters for the different decomposition steps in the complexes were calculated. HEPTS and its Cu(II) complexes showed high activity against gram negative bacteria; [Cu(3)(EPTS)(2)(EtOH)(2)Br(4)] has more activity.     

Structural and Electronic Properties of New Materials Based on Thiophene and Phenylene

Theoretical study on the geometries and electronic properties of new conjugated compounds based on thiophene and phenylene was carried out. The theoretical ground-state geometries and electronic structures of the studied molecules were obtained using the density functional theory (DFT) method at B3LYP level with 6-31G(d) basis set. The electronic properties were determined by ZINDO/s, CIS/3-21G(d), and TD//B3LYP/3-21G(d) calculations performed on the B3LYP/6-31(d) optimized geometries. The effects of the ring structure and the substituents on the geometries and electronic properties of these materials were discussed. The results of this study indicate how the electronic properties can be tuned by the backbone ring or side group and suggest these compounds as good candidates for opto-electronic applications.     

Temperature-dependent structural changes of[Bmim]FeCl4 magnetic ionic liquid characterized by an in-situ X-ray absorption fine structure

The temperature-dependent structural changes in 1-butyl-3-methylimidazolium tetrafluoride([Bmim]FeCl4)magnetic ionic liquid(MIL)were investigated by using in-situ X-ray absorption fine structure(XAFS)combined with Raman spectroscopy and DFT calculations.XAFS re sults revealed that the coordination number and bond length of Fe-Cl in the anion of[Bmim]FeCl4 MIL decreased with increments in temperature.These results directly reflected the dissociation of tetrahedral structure[FeCl4]^-,and the formation of bridge-chain[Fe2 Cl5]^+,and[FeCl2]^+species in the anion of[Bmim]FeCl4 MIL.These behaviors indicated that[FeCl4]^-dissociation was endothermic,and was promoted by increased temperature.The results obtained through XAFS were in agreement with those obtained through Raman spectroscopy and DFT calculations.