加热炉内板坯粘塑性下桡变形的研究

在加热妒内，由于高温及重力作用，板坯两端的悬臂将产生下桡变形。悬臂越长，下桡将越大，导致悬臂下桡部分与出口端墙相碰，影响出料而造成事故。本文对加热炉内板坯的下桡变形进行了分析计算。首先，建立了板坯的二维非稳态导热模型并用有限差分法计算了炉内板坯随时间的温度变化；然后建立了板坯悬臂粘塑性变形模型，用有限元法计算了高温条件下由重力引起的悬臂的下桡变形。由此理论模型计算出的板坯抽出温度与悬臂端下桡量与实测结果吻合良好，说明该理论模型及模型计算方法是正确的，可用于对装钢生产进行指导。     

Temperature‐modulated differential scanning calorimetry studies on the origin of double melting peaks in isothermally melt‐crystallized poly(L‐lactic acid)

In this work, the melting behaviors of nonisothermally and isothermally melt‐crystallized poly(L ‐lactic acid) (PLLA) from the melt were investigated with differential scanning calorimetry (DSC) and temperature‐modulated differential scanning calorimetry (TMDSC). The isothermal melt crystallizations of PLLA at a temperature in the range of 100–110 °C for 120 min or at 110 °C for a time in the range of 10–180 min appeared to exhibit double melting peaks in the DSC heating curves of 10 °C/min. TMDSC analysis revealed that the melting–recrystallization mechanism dominated the formation of the double melting peaks in PLLA samples following melt crystallizations at 110 °C for a shorter time (≤30 min) or at a lower temperature (100, 103, or 105 °C) for 120 min, whereas the double lamellar thickness model dominated the formation of the double melting peaks in those PLLA samples crystallized at a higher temperature (108 or 110 °C) for 120 min or at 110 °C for a longer time (≥45 min). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 466–474, 2007     

Lanthanum nitrate decomposition by both temperature programmed heating and citrate gel combustion

Thermal decomposition of lanthanum nitrate to lanthanum oxide was carried out by both temperature programmed heating (TPH) and citrate-gel combustion. The temperature programmed heating was carried out under flow of oxidizing (air), neutral (nitrogen) and reducing (25 vol.% hydrogen+argone mixture) gases, and the processes were controlled by simultaneous thermogravimetry and differential thermal analysis. It was shown that hydrogen atmosphere helps to reduce temperatures of all decomposition steps. The results of TPH were utilized to check the nature of residues in the products of lanthanum nitrate-to-oxide conversion performed via citrate-gel combustion technique.     

A Generalized Unpaired Electron Spin Density Equation and Organic Hyperconjugation Mechanism

A large class of stereochemcial and related interactions in organic chemistry are repulsive and others are attractive, but the relative orientation of two methyl groups and the amount of energy required to twist one relative to the other (the hindered rotation energy barriers), or the alignment of such a group with respect to a conjugated ring to which it is attached (widely attributed to a mechanism called “hyperconjugation”) are estimated to be small in compared with the total energy of the molecule. We used theories of both isotropic and anisotropic proton hyperfine interactions in the π‐electron systems developed in the early sixties. They are approximated by the magnetic dipole nteractions between each proton and an electron spin magnetization that is distributed in 2s and 2p Slater atomic orbitals center on carbon atoms. We have extended these theories to the non‐planar olefinic cation radicals, which are very important in biochemistry as well as in petroleum catalysis. A three dimensional electron spin density equation has been developed in this paper to handle some Jahn‐Teller vibronic molecules. The new electron spin density equation related the observed proton hyperfine splittings to the non‐planar structures of the open‐chain alkene cation radicals generated by radiolysis and various chemical oxidation methods. The spin densities and the conformational calculations based on valence bond theory and symmetry principles are compared with some more elaborated molecular orbital calculations in the literature. The localized valence bond approaches are better in accord with our experimental results. The anomalous line‐width effect of the four methyl groups observed in the 2,3‐dimethyl‐2‐butene cation radicals also confirmed the positive sign of the electron‐proton hyperfine constant of hyper‐conjugation mechanism. A methyl substituent attached to a conjugated molecule often behaves as if it formed part of the region of conjugation; the charge appears to flow from the methyl group into the π electron system and it may also give rise to an appreciable dipole moment. Methylation also gives rise to an appreciable dipole moment, and the resultant red shift of electronic absorption bands is of some importance in the design of dye molecules.     

Amine‐blocked polyisocyanates. I. Synthesis of novel N‐methylaniline‐blocked polyisocyanates and deblocking studies using hot‐stage fourier transform infrared spectroscopy

A series of substituted N‐methylaniline‐blocked polyisocyanates based on 4,4′‐methylenebis(phenyl isocyanate) and poly(tetrahydrofuran) were prepared and characterized thoroughly with FTIR, ¹H NMR, and ¹³C NMR spectroscopy methods. Compared with unsubstituted N‐methylaniline, a blocking agent with an electron‐releasing substituent at the para position took a shorter time, whereas those with an electron‐releasing substituent at the ortho position or an electron‐withdrawing substituent at the ortho and para positions took longer times for the blocking reaction. The thermal dissociation reactions of blocked polyisocyanates were carried out with an FTIR spectrophotometer attached to hot‐stage accessories under dynamic and isothermal conditions. The dynamic method was used to determine the deblocking temperature, and the isothermal method was used to calculate the deblocking kinetics and activation parameters. The cure times of blocked polyisocyanates with hydroxyl‐terminated polybutadiene were also determined. The deblocking temperatures, the results of cure‐time studies, and the kinetic parameters revealed that the thermal dissociation of the N‐methylaniline‐blocked polyisocyanates was retarded by electron‐donating substituents and facilitated by electron‐withdrawing substituents. The action of N‐methylanilines as blocking agents for isocyanate was explained by the formation of a four‐center, intramolecularly hydrogen‐bonded ring structure during the thermal dissociation of the blocked polyisocyanates. The formation of such a hydrogen‐bonded ring structure was confirmed and supported by variable‐temperature ¹H NMR studies and entropy parameters, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1557–1570, 2007     

Nondispersive two-electron wave packets in driven helium

We provide a detailed quantum treatment of the spectral characteristics and of the dynamics of nondispersive two-electron wave packets along the periodically driven, collinear frozen planet configuration of helium. These highly correlated, long-lived wave packets arise as a quantum manifestation of regular islands in a mixed classical phase space, which are induced by nonlinear resonances between the external driving and the unperturbed dynamics of the frozen-planet configuration. Particular emphasis is given to the dependence of the ionization rates of the wave packet states on the driving field parameters and on the quantum mechanical phase space resolution, preceded by a comparison of 1D and 3D life times of the unperturbed frozen planet. Furthermore, we study the effect of a superimposed static electric field component, which, on the grounds of classical considerations, is expected to stabilize the real 3D dynamics against large (and possibly ionizing) deviations from collinearity. Received 7 November 2002 / Received in final form 2 December 2002 Published online 28 January 2003     

Ag-Bi高温超导线材转变温度的测量

介绍了 Bi系银包套高温超导线材的电阻温度特性 ,用测电阻和电磁感应两种方法分别测量了材料的超导转变温度 ,电磁感应法测量曲线上台阶的出现表明材料中 Bi(2 2 2 3)和 Bi(2 2 12 )两相的存在。     

25MeV/u6He+9Be反应的轻粒子发射

在25MeV/u ⁶He与⁹Be靶的反应中,107°和128°处明显地观察到了轻粒子发射.粒子能谱形状与平衡热源蒸发相一致,分析得到热源的核温度为完全熔合条件下的5.6MeV或非完全熔合条件下的5.2MeV .实验发现发射氚的数量特别大,这可能与目前广泛研究的⁶He的集团结构和同位旋效应有关.     

不同温度均匀二半空间接触后产生的辐射场

 应用电磁线路中涨落耗散理论，推导了不同温度均匀二半空间接触后产生辐射场密度的公式。将此公式近似展开后，即得Grover和Urtiew所获得的表示式，不过多了一松弛项，该项如用非富里叶热传导理论推导，也是存在的。该结果和实验结果一致，不过这里的松驰时间可以应用介质性质进行计算。     

HL—1装置中心热区电子热传导初步分析

在电流及温度分布满足“不变性”原理的基础上,本文分析了等离子体中心热区的能量平衡,求出了电子热传导系数,根据实验数据拟合出HL-1装置电子热传导系数的定标关系为X_e=6.8(n_(eq1))~(-1.2)。此关系与其他托卡马克装置的结果类似。