Structural studies of Cr-doped mullite derived from single-phase precursors

Cr-doped mullites were prepared from single-phase precursors containing up to 9.60 wt% Cr₂O₃ using a sol-gel technique followed by thermal treatment. Particle induced X-ray emission spectroscopy and X-ray powder diffraction were used to characterize the samples. Mullites were orthorhombic, space group Pbam. Cr doping caused the increase of unit-cell parameters. Strongest expansion was noticed along c-axis followed by a and b (Δc/c=0.089, Δa/a=0.061, Δb/b=0.045% per mole Cr₂O₃). A second phase, namely θ-(Al,Cr)₂O₃, was revealed by XRD in the sample containing 9.60 wt% Cr₂O₃. The structure of mullites was refined by the Rietveld method, location of Cr³⁺ was performed by the EPR spectroscopy. At low chromium doping level (Cr₂O₃ content less than ∼5 wt%) Cr³⁺ ions were substituted for Al³⁺ in the AlO₆ octahedra of the mullite structure (M1 site). For higher doping level, Cr³⁺ ions were additionally substituted for Al³⁺ in the AlO₆ octahedra of the second phase [θ-(Al,Cr)₂O₃ at 1400 °C, or α-(Al,Cr)₂O₃ at 1600 °C] which segregated in the system. Substitution of Cr³⁺ for Al³⁺ on M1 site in the mullite structure resulted in increase of average distances in (M1)O₆ octahedron and decrease of average distances in T*O₄ tetrahedron, while average distances in TO₄ tetrahedron stayed almost constant.     

Study of nitrogen ion implantation and diffusion phenomena on thin chromium layers followed by the atomic force microscopy and secondary ion mass spectroscopy techniques characterization

This research investigates the effect of ion implantation dosage level and further thermal treatment on the physical characteristics of chromium coatings on Si(1 1 1) substrates. Chromium films had been exposed to nitrogen ion fluencies of 1 × 10¹⁷, 3 × 10¹⁷, 6 × 10¹⁷ and 10 × 10¹⁷ N⁺ cm⁻² with a 15 keV energy level. Obtained samples had been heat treated at 450 °C at a pressure of 2 × 10⁻² Torr in an argon atmosphere for 30 h. Atomic force microscopy (AFM) images showed significant increase in surface roughness as a result of nitrogen ion fluence increase. Secondary ion mass spectroscopy (SIMS) studies revealed a clear increased accumulation of Cr₂N phase near the surface as a result of higher N⁺ fluence. XRD patterns showed preferred growth of [0 0 2] and [1 1 1] planes of Cr₂N phase as a result of higher ion implantation fluence. These results had been explained based on the nucleation-growth of Cr₂N phase and nitrogen atoms diffusion history during the thermal treatment process.     

气体放电等离子体特性测量I-V曲线不对称性的研究

利用气体放电双探针法研究了等离子体的I-V曲线中的电流I相对于电压V轴交点的不对称性,并提出2种可能的解释:一认为是由于两探针表面积不同引起的;二认为是由于探针所在处等离子体电位不等引起的.本文利用仪器的工艺误差和调换放电管电压的方法,对提出的2种可能原因分别进行验证,并指出第二种解释的合理性,并对其进行了理论分析.     

Epitaxy: the motion picture

The engineering of many modern electronic devices demands control over a crystal down to the thickness of a single layer of atoms—and future demands will be even more challenging. Such control is achieved by the method of crystal growth known as epitaxy, and that makes this method the subject of intense study. More than that, recent advances are revolutionizing our knowledge of how surfaces grow. In fact, growing surfaces show a beautifully rich variety of phenomena, many of which are only now beginning to be uncovered. In the past few years many surface imaging techniques have been used to give us a close look at how crystals grow—while they are growing. The purpose of this article will be to illustrate some of the ways real surfaces grow and change as revealed by some of the latest in situ microscopic imaging technologies.

It is often said that crystal growth is more of an art than a science. Here we will show that it is emphatically both.     

Simultaneous Measurement of Particle Size and Particle Velocity by the Spatial Filtering Technique

The objective of this study was to compare the measuring results of a fiber‐optical probe based on a modified spatial filtering technique with given size distributions of different test powders and also with particle velocity values of laser Doppler measurements. Fiber‐optical spatial filtering velocimetry was modified by fiber‐optical spot scanning in order to determine simultaneously the size and the velocity of particles. The fiber‐optical probe system can be used as an in‐line measuring device for sizing of particles in different technical applications. Spherical test particles were narrow‐sized glass beads in the range 30–100 μm and irregularly shaped test particles were limestone particles in the range 10–600 μm. Particles were dispersed by a brush disperser and the measurements were carried out at a fixed position in a free particle‐laden air stream. Owing to the measurement of chord lengths and to the influence of diffraction and divergent angle, the probe results show differences from the given test particle sizes. Owing to the particle‐probe collisions, the mean velocity determined by the probe is smaller than the laser Doppler mean velocity.     

A high-current electron beam ion trap as an on-line charge breeder for the high precision mass measurement TITAN experiment

The precision of atomic mass measurements in a Penning trap is directly proportional to the charge state q of the ion and, hence, can be increased by using highly charged ions (HCI). For this reason, charge breeding with an electron beam ion trap (EBIT) is employed at TRIUMF’s Ion Trap for Atomic and Nuclear science (TITAN) on-line facility in Vancouver, Canada. By bombarding the injected and trapped singly charged ions with an intense beam of electrons, the charge state of the ions is rapidly increased inside the EBIT. To be compatible with the on-line requirements of short-lived isotopes, very high electron beam current densities are needed. The TITAN EBIT includes a 6 Tesla superconducting magnet and is designed to have electron beam currents and energies of up to 5 A and 60 keV, respectively. Once operational at full capacity, most species can be bred into a He-like configuration within tens of ms. Subsequently, the HCI are extracted, pass a Wien filter to reduce isobaric contamination, are cooled, and injected into a precision Penning trap for mass measurement. We will present the first results and current status of the TITAN EBIT, which has recently been moved to TRIUMF after assembly and commissioning at the Max-Planck-Institute (MPI) for Nuclear Physics in Heidelberg, Germany.     

Determination of iphosphamide and seven metabolites in blood plasma,as stable trifluoroacetyl derivatives,by electron capture chemical ionization GC-MS

A method is described for the determination of the antitumor agent iphosphamide and seven of its metabolites in the plasma of cancer patients by multiple ion monitoring (MIM) GC-MS, mainly using the electron capture chemical ionization mode, of stable methyl and/or trifluoroacetyl derivatives. The metabolites determined were 2- and 3-dechloroethyliphosphamide, 4-ketoiphosphamide, carboxyiphosphamide, iphosphamide mustard, and two previously undetected metabolites, chloroethylamine and 1,3-oxazolidine-2-one. The isolation of the acidic and neutral metabolites was performed by solid phase extraction on to C₁₈ adsorbent at pH 4. The weakly acidic iphosphamide mustard, isolated under these conditions with a yield of ca 50%, was measured as a stable methyltrifluoroacetyl derivative, in contrast to the corresponding phosphoramide mustard of the isomer cyclophosphamide which decomposes during derivatization. Chloroethylamine and 1,3-oxazolidine-2-one were isolated with high yield by liquid extraction with ethyl acetate at pH 10. Selective measurement of several metabolite derivatives with similar retention times was performed by multiple ion monitoring MS of specific ion masses, using a methyl phenyl siloxane capillary column previously employed in the study of cyclophosphamide metabolites. Quantitation of metabolites in patient plasma samples could be performed in the concentration range 3 ng to 20 μg per ml of original plasma.     

Electron excitation cross section of atomic transitions in the two‐state approximation

The cross section of the 3s → 3p transition of sodium produced by electron impact has been calculated by performing a numerical integration of the coupled differential equations. The potential functions have been calculated exactly using the hydrogen‐like wave functions for the valence electron of the sodium with an effective charge adjusted to fit the experimental 3s → 3p line strength. The results compare very well with experimental data and with those obtained using more elaborate and sophisticated models.     

Bis(pentafluorophenyl) disulfide as a hydrogen abstractor and an electron acceptor from the resulting radical intermediate

The pentafluorobenzenethiyl radical is an efficient hydrogen abstractor from an activated methylene or methine group and bis(pentafluorophenyl) disulfide is an efficient electron acceptor from the resulting radical intermediate. Thus benzyl-OTBS ether was easily converted into the corresponding pinacol, and 2-phenyl-1,3-dioxanes are converted into the monobenzoates of diols.     

Quantized charge transport in adiabatic pumping by a driven double δ-barrier

We investigate the condition that the charge carried by quantum parametric pumping per cycle is quantized in units of the electron charge e and the role of adiabaticity in charge quantization. Using a driven double-δ-potential model and a Floquet scattering approach, it is found that the quantization phenomenon occurs only at very low frequencies of the oscillating potential and adiabaticity of the potential modulation is crucial for quantization.