Tetragonal distortions of the octahedral environments of Cr3+, Fe3+ and Gd3+ ions in A2CdF4 (A = Rb,Cs) and ACdF3 crystals

Abstract

The tetragonal distortions of local octahedral environments of Cr³⁺, Fe³⁺ and Gd³⁺ ions in Rb₂CdF₄, Cs₂CdF₄, RbCdF₃ and CsCdF₃ crystals have been studied by analyzing their EPR spectra. From the studies, it is found that the tetragonal distortions for Cr³⁺ and Fe³⁺ impurity ions, which substitute Cd²⁺ and have nearly the same ionic radius, are close to each other, whereas that for Gd³⁺ impurity ion, having a larger ionic radius, is larger than those for Cr³⁺ and Fe³⁺ ions in the same crystal. It appears that not only the impurity-ligand distance, but also the tetragonal distortions of impurity centres in crystals are closely related to the size of impurity.     

The feasibility of Al-based oxide precipitation in Fe–10%Cr alloy by ion implantation

This paper reports the feasibility of nano-oxide precipitate formation in Fe–Cr alloy by ion implantation synthesis. High contents of Al⁺ and O⁺ ions were implanted into thin films of high purity Fe–10%Cr alloy at room temperature and were studied by transmission electron microscopy (TEM) and atom probe tomography (APT). In contrast, to the common two-stage implantation/annealing scheme of precipitate ensemble synthesis by ion beams, cluster formation took place at the implantation stage in our study, requiring no subsequent high-temperature annealing. The post-implantation microstructural examination revealed in the as-implanted thin foil an array of precipitates with diameters in the range of 3–30?nm. The precipitate number density distribution was found to depend on the foil thickness. The precipitate enrichment with both Al and O was confirmed by the energy-filtered TEM analysis. Judging from the electron diffraction pattern and high-resolution TEM analysis, the crystal lattice of precipitates corresponds to some cubic modification of aluminium-rich oxide or pure aluminium oxide. The precipitate lattice alignment with the host matrix was revealed for at least a part of precipitates. The analysis of APT data using cluster detection algorithm indicates the presence of local zones enriched in Al and O, even in those areas of as-implanted samples where no clusters were visible by TEM.     

Cooling Characteristics During Bath Quenching of Test Probe Using Inverse Heat Transfer

It is of engineering importance to accurately predict the surface cooling characteristics in bath quenching of metals and alloys. In this investigation, the surface cooling characteristics in quenching of Wolfson probe are estimated with reasonable accuracy by solving an inverse heat conduction problem. Regularization method is used for smoothening the input temperature measurements at probe center, for superior inversion estimates. The reverse pool-boiling curve is captured on bath quenching characteristic, plotted as cooling velocity versus surface temperature. The prime advantage is the bypassing of convection coefficients, which are uncertain in pool boiling.     

Hierarchical Cu precipitation in lamellated steel after multistage heat treatment

Abstract

The hierarchical distribution of Cu-rich precipitates (CRPs) and related partitioning and segregation behaviours of solute atoms were investigated in a 1.54 Cu-3.51 Ni (wt.%) low-carbon high-strength low-alloy (HSLA) steel after multistage heat treatment by using the combination of electron backscatter diffraction (EBSD), transmission electron microscopy (TEM) and atom probe tomography (APT). Intercritical tempering at 725 °C of as-quenched lathlike martensitic structure leads to the coprecipitation of CRPs at the periphery of a carbide precipitate which is possibly in its paraequilibrium state due to distinct solute segregation at the interface. The alloyed carbide and CRPs provide constituent elements for each other and make the coprecipitation thermodynamically favourable. Meanwhile, austenite reversion occurs to form fresh secondary martensite (FSM) zone where is rich in Cu and pertinent Ni and Mn atoms, which gives rise to a different distributional morphology of CRPs with large size and high density. In addition, conventional tempering at 500 °C leads to the formation of nanoscale Cu-rich clusters in α-Fe matrix. As a consequence, three populations of CRPs are hierarchically formed around carbide precipitate, at FSM zone and in α-Fe matrix. The formation of different precipitated features can be turned by controlling diffusion pathways of related solute atoms and further to tailor mechanical properties via proper multistage heat treatments.     

The use of electron microscopy for the study of phase transitions

Two examples of the study of phase transitions by means of electron diffraction and electron microscopy are discussed.     

消光式核壳二聚体传感器的设计与光谱特性分析

根据ITO/Au纳米核壳二聚体粒子在生物医学领域的应用合理性,设计了一种实时检测生物液体的核壳二聚体探针消光式传感器;由偶极子理论推导出输出波长与外界环境折射率关系;利用MATLAB设计ITO/Au纳米核壳二聚体粒子结构;采用软件DDSCAT7.3结合离散偶极近似法,利用二聚体有效半径模拟计算了300~950nm可见光到红外光波段不同核壳比、二聚体间距、以及不同介质折射率的消光光谱;根据传感芯片折射率与偶极共振、耦合八级共振的响应关系得出ITO/Au二聚体的折射率灵敏特性。与传统Ag/Au核壳纳米粒子相比,ITO/Au纳米核壳二聚体结构引入了可作为传感芯片灵敏性自参考参数的耦合八级共振峰,同时ITO/Au二聚体结构的折射率灵敏度可达到419nm/RIU。这些工作及其结果对制作消光式传感器具有重要的意义。     

基于B3PyMPM∶Cs高效叠层OLED器件的制备

以B 3 PyMPM∶Cs/Al/HAT-CN作为电荷生成单元制备高效叠层绿色磷光有机电致发光器件,叠层器件的最大电流效率和最大流明效率分别为172.2 cd/A和111.0 lm/W,在5 mA/cm^2电流密度下,叠层器件的电压和亮度分别为传统器件的2.04倍和2.84倍.为了探究叠层器件性能优于传统器件的原因,研究了电荷生成单元内的电荷产生和注入过程,以及薄层铝对电子注入特性和电荷生成单元稳定性的影响.实验结果表明,电荷能够有效地在电荷生成单元内产生并顺利注入电子传输层中,B3PyMPM∶Cs和HAT-CN间Al薄层的插入能够进一步提高电子注入效率及器件结构的稳定性.     

Imaging and tracking an electrostatic charge micro-domain by Kelvin force microscopy as evidence of water adsorption on mica surface

Muscovite mica is a widely accepted substrate for scanning probe microscopy (SPM) investigations. However, mica has intrinsic properties that alter samples and obstruct their analysis due to free charges build-up, ionic exchange and water adsorption taking place at the surface. In addition to interfacial phenomena, there is a growing interest in electrostatic charges on insulators as they are crucial in diverse applications. Despite the high demand for studies of this nature, experimental set-ups capable of resolving charge build-up at the micro-scale are still scarce and technically limited. Here, we report the imaging of surface charge dissipation on freshly cleaved mica by Kelvin-probe Force Microscopy (KPFM). A local electrostatic charge micro-domain was generated by friction between an atomic force microscope (AFM) tip and mica, and its decay was tracked by two-dimensional mapping using KPFM. We found time-dependent charge dissipation, which is attributed to the adsorption of water molecules on mica surface.     

空间波函数的对称性对氦原子双光子双电离过程中电子关联的影响

通过数值求解含时薛定谔方程,研究了氦原子具有对称空间波函数的1s2s 1S态和具有反对称空间波函数的1s2s 3S态分别作为初态的双光子双电离过程. 结果表明,对于初态为单重态1s2s 1S的双光子双电离过程,两个电离电子的能量分布随激光脉冲持续时间的增加呈现由单峰到双峰的变化,这里的单峰和双峰分别意味着两个电离电子主要携带相等和不等的能量;然而对于初态为三重态1s2s 3S的双光子双电离过程,两个电离电子的能量分布随激光脉冲持续时间的增加总是保持双峰结构. 这些结果表明当原子的初态处于反对称空间波函数时,两电子的空间密度分布具有较少的重叠,从而导致电子在超短激光脉冲中电离时电子关联能无法平均分配.