Synthesis and photoluminescence properties of BF2 complexes with 1,3-diketone ligands

BF₂ complexes with 1,3-diketone ligands were synthesized, and their optical and electrochemical properties were studied. The colors of the complexes varied depending on the structures of the 1,3-diketone ligands. The absorption and emission maxima of the complexes with 1,3-diaryl-1,3-diketone ligands were considerably red shifted as compared to those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands, suggesting an extended π-conjugation of the 1,3-diaryl-1,3-diketone moieties. The molar absorption coefficients and quantum yields of the complexes with 1,3-diaryl-1,3-diketone ligands were larger than those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands. Cyclic voltammetry measurements revealed that the reduction potentials of the BF₂ complexes were higher than those of the free ligands. These complexes exhibited various emission colors in the solid states due to the intermolecular interactions.     

Mechanical properties of fiber reinforced styrene-butadiene rubbers using surface-modified UHMWPE fibers under EB irradiation

Aiming to develop a high performance fiber reinforced rubber of SBR, a special technique using electron beam (EB) irradiation-induced graft-polymerization was applied to ultra-high molecular-weight polyethylene (UHMWPE) fibers. Although UHMWPE is chemically inert, N-vinyl formamide (NVF) could be graft-polymerized onto the UHMWPE fiber surface with this special technique. A maximum grafting percentage of 23.6% was achieved. The composite of SBR and grafted UHMWPE fibers with maximum grafting indicated a linear increase in the initial modulus and strength with the fiber content. At the fiber content of 10%, the initial modulus was improved about five times with respect to that of the pure SBR, while the strength was done about twice. At this moment, only a small reduction could be observed in the strain compared with that of pure SBR. The fiber reinforced rubber with a good performance was obtained in the system of SBR and grafted UHMWPE fibers.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

Electron paramagnetic resonance spin label titration: a novel method to investigate random and site-specific immobilization of enzymes onto polymeric membranes with different properties

The immobilization of biological molecules onto polymeric membranes to produce biofunctional membranes is used for selective catalysis, separation, analysis, and artificial organs. Normally, random immobilization of enzymes onto polymeric membranes leads to dramatic reduction in activity due to chemical reactions involved in enzyme immobilization, multiple-point binding, etc., and the extent of activity reduction is a function of membrane hydrophilicity (e.g. activity in cellulosic membrane?polysulfone membrane). We have used molecular biology to effect site-specific immobilization of enzymes in a manner that orients the active site away from the polymeric membrane surface, thus resulting in higher enzyme activity that approaches that in solution and in increased stability of the enzyme relative to the enzyme in solution. A prediction of this site-specific method of enzyme immobilization, which in this study with subtilisin and organophosphorus hydrolase consists of a fusion tag genetically added to these enzymes and subsequent immobilization via the anti-tag antibody and membrane-bound protein A, is that the active site conformation will more closely resemble that of the enzyme in solution than is the case for random immobilization. This hypothesis was confirmed using a new electron paramagnetic resonance (EPR) spin label active site titration method that determines the amount of spin label bound to the active site of the immobilized enzyme. This value nearly perfectly matched the enzyme activity, and the results suggested: (a) a spectroscopic method for measuring activity and thus the extent of active enzyme immobilization in membrane, which may have advantages in cases where optical methods can not be used due to light scattering interference; (b) higher spin label incorporation (and hence activity) in enzymes that had been site-specifically immobilized versus random immobilization; (c) higher spin label incorporation in enzymes immobilized onto hydrophilic bacterial cellulose membranes versus hydrophobic modified poly(ether)sulfone membranes. These results are discussed with reference to analysis and utilization of biofunctional membranes.     

Novel anti-inflammatory and wound healing controlled released LDH-Curcumin nanocomposite via intramuscular implantation,in-vivo study

One of the most common problems in wounds is delayed healing and complications such as infection. Therefore, the need for novel materials accelerates the healing of wounds especially abdominal wounds after surgery besides high efficiency and safety is mandatory. The rate of wound healing, anti-inflammatory and biocompatibility of Zn-Al LDH (Zn-Al layer double hydroxide) alone and loaded with Curcumin (Zn-Al LDH/Curcumin) was screened via in-vivo assays through intramuscular implantation in rat abdominal wall with intact peritoneum cavity. The implanted drugs were formed through Curcumin loaded into LDH of Zn-Al with drug release of 56.78 ± 1.51% within 24 h. The synthesized nanocomposite was characterized by (TGA/DTA) thermal analysis, (XRD) X-ray diffraction, (FESEM) Field emission scanning electron microscopy, (HRTEM) high resolution transmission electron microscope, energy dispersive X-ray (EDX) and low-temperature N₂ adsorption, pore volume and average pore size distribution. The integrity of blood circulation, inflammatory signs, wound healing rate, capacity of tissue integration, antigenicity and composite biocompatibility, auto fluorescence ability of collagen bundles and the tensile strength of the muscle were assessed histopathologically after 7 and 30 days’ post-implantation. Excellent wound healing ability was achieved with shortest length between the wound gap edges and higher tensile strength of the muscle. Besides emit florescence very well followed by good healing and tensile muscles strength in Curcumin while very low strength with scar formation in Zn-Al LDH/Curcumin in both acute and chronic wound. No signs of inflammation in Curcumin & Zn-Al LDH. No vessels obstruction or bleeding observed in both Zn-Al LDH and Curcumin more than Zn-Al LDH/Curcumin and control which examined through candling. Good healing & infiltrated immune cells in same groups through histopathological examination. This work supports the anti-inflammatory, wound healing and biocompatibility of both LDH and Curcumin with living matter, increasing their biomedical applications in this era with safety and increasing efficacy with prolonged drug release.     

ESCA: Electron Spectroscopy for Chemical Analysis

A substance on which X-rays fall emits photoelectrons and Auger electrons. The energy spectra of the electrons emitted provide information about the electronic structure in the specimen, ranging from the innermost atomic levels and their dependence on the chemical environment to the molecular orbitals of the valence electrons and the band structure in solids. Electron spectra of this nature can now be recorded with high-resolution instruments; their analysis offers new aspects for investigation of chemical composition. The method of electron spectroscopy developed for this purpose, which has now been developed to a high degree of perfection, will be referred to in the following discussion as ESCA (Electron Spectroscopy for Chemical Analysis).     

Highly selective conversion of N-aroyl-α-dehydronaphthylalaninamides into 3,4-dihydrobenzoquinolinone derivatives via photoinduced intermolecular electron transfer

The irradiation of substituted (Z)-N-aroyl-α-dehydronaphthylalaninamides [(Z)-1] in methanol containing triethylamine (TEA) with Pyrex-filtered light was found to give 3,4-dihydrobenzoquinolinone derivatives (2) in high yields along with minor amounts of 4,5-dihydrooxazole derivatives (3). Analysis of the substituent effects on product composition revealed that both the photoreactivity of 1 and the selectivity of 2 are decreased with increasing electron-withdrawing ability of the substituent introduced at the para-position on the N-benzoyl benzene ring. From the analysis of the dependence of the quantum yield for the formation of 2 on the TEA concentration, it was found that back electron transfer occurs efficiently within an (E)-1 anion radical-TEA cation radical pair intermediate.     

The phase diagram and tetragonal superstructures of the rare earth cobaltate phases Ln1−xSrxCoO3-δ (Ln=La, Pr, Nd, Sm, Gd, Y, Ho, Dy, Er, Tm and Yb)

Single phase perovskite-based rare earth cobaltates (Ln_1−xSr_xCoO_3−δ) (Ln=La³⁺, Pr³⁺, Nd³⁺, Sm³⁺, Gd³⁺, Dy³⁺, Y³⁺, Ho³⁺, Er³⁺, Tm³⁺ and Yb³⁺; 0.67?x?0.9) have been synthesized at 1100°C under 1 atmosphere of oxygen. X-ray diffraction of phases containing the larger rare earth ions La³⁺, Pr³⁺ and Nd³⁺ reveals simple cubic structures; however electron diffraction shows orientational twinning of a local, tetragonal (I4/mmm; a_p×a_p×2a_p) superstructure phase. Orientational twinning is also present for Ln_1−xSr_xCoO_3−δ compounds containing rare earth ions smaller than Nd³⁺. These compounds show a modulated intermediate parent with a tetragonal superstructure (I4/mmm; 2a_p×2a_p×4a_p). Thermogravimetric measurements have determined the overall oxygen content, and these phases show mixed valence (3⁺/4⁺) cobalt oxidation states with up to 50% Co(IV). X-ray diffraction data and Rietveld techniques have been used to refine the structures of each of these tetragonal superstructure phases (Ln=Sm³⁺-Yb³⁺). Coupled Ln/Sr and oxygen/vacancy ordering and associated structural relaxation are shown to be responsible for the observed superstructure.     

Chemical Bonding and Pressure‐Induced Change of the Electron Configuration of Ytterbium in β‐YbAgGa2

Single‐phase polycrystalline samples of the intermetallic compound β‐YbAgGa₂ were synthesized by inductive heating and subsequent annealing for eight weeks at 670 K. Magnetic properties were characterized by susceptibility measurements and indicated intermediate valence of ytterbium at ambient pressure. Angle‐dispersive X‐ray powder diffraction data of orthorhombic β‐YbAgGa₂ indicate stability of the phase in the investigated pressure range from 0.1 MPa (ambient pressure) to 19 GPa. The pressure‐induced volume decrease is accompanied by an increase of the effective valence from 2.17 at ambient conditions to 2.71 at 16 GPa as evaluated by X‐ray absorption spectroscopy at the Yb L_III threshold. Analysis of the chemical bonding in β‐YbAgGa₂ by integrating the electron density of the polyanion in basins as defined by the electron localization function results in an electron count Yb^2.7+[(Ag^0.2—)(Ga1(3b)^1.0—)(Ga2(4b)^1.5—)]. This finding is close to the expected values calculated by means of the Zintl rules and fits well the results of magnetic susceptibility measurements and XAS investigations.     

Trifluoroethylene Sultone: Structure and Chemistry

The gas phase structure of trifluoroethylene sultone, ( 1 ) (3,4,4-trifluoro-1,2-oxathietane-2,2-dioxide) was determined by gas electron diffraction, and the four-membered ring was found to be planar. The following ring parameters (r_a distances and ∠_α angles with 3σ uncertainties) were derived in the electron diffraction analysis: C? O = 1.41 Å (ass.), C? C = 1.541(18) Å, S? O = 1.652(5) Å, S? C = 1.822(8) Å, S? C? C = 86.2(15)°, C? C? O = 97.1(28)°, C? O? S = 97.5(21)°, and O? S? C = 79.1(8)°. New spectral data (IR, NMR) of 1 , its acyclic isomer FSO₂CFHC(O)F ( 2 ), and the related anhydride, FSO₂OSO₂CFHC(O)F ( 3 ), are reported. New esters containing the fluorosulfonyl function, FSO₂CFHC(O)OCH₂CF₃ ( 4 ), FSO₂CFHC(O)OCH₂CH = CH₂ ( 5 ), and (FSO₂CFHC(O)OCH₂CH? CH₂? )_n ( 6 ) have been prepared and characterized.