Synthesis of a new donor, BEDT-HBDST and crystal structures, electrical and magnetic properties of (BEDT-HBDST)2MX4 (M=Fe, Ga, X=Cl, Br), where BEDT-HBDST=2,5-bis(4,5-ethylenedithio-1,3-diselenol-2-ylidene)-2,3,4,5-tetrahydrothiophene

A novel conjugation-elongated bis(ethylenedithio)tetraselenafulvalene (BETS) type donor, 2,5-bis(4,5-ethylenedithio-1,3-diselenol-2-ylidene)-2,3,4,5-tetrahydrothiophene (BEDT-HBDST) and its magnetic and non-magnetic anion salts, (BEDT-HBDST)₂MX₄ (MX₄⁻=FeCl₄⁻, GaCl₄⁻, FeBr₄⁻ and GaBr₄⁻), were prepared. These four salts are isostructural and belong to the space group of P2/c. They showed semiconducting behavior with small activation energies (59-64 meV). The band structures of these salts are quasi one-dimensional and there is a midgap between the upper band and the lower band, since the degree of dimerization is significant in the stacking direction. The MX₄⁻ ions are located between the donor columns and near to the ethylenedithio moieties of the donor molecules. The magnetic susceptibilities of the FeCl₄⁻ and FeBr₄⁻ salts follow the Curie-Weiss law with Curie constants of 4.6 and 4.8 emu K mol⁻¹ (sum of the spins of S=5/2 and S=1/2) and negative Weiss temperatures of θ=−1.2 and −4.9 K, respectively, revealing a weak antiferromagnetic interaction of 3d spins of the FeCl₄⁻ and FeBr₄⁻ anions. The Fe?Fe (6.66-7.60 Å), Cl?Cl (4.81-4.82 Å) and Br?Br (4.74-4.77 Å) distances in the crystal structures of these salts are significantly long. Therefore, the direct magnetic interaction between the 3d spins of the nearest neighboring Fe³⁺ ions appears to be not readily accessible.     

New organic metals: Radical cation salts of bis(ethylenedioxo)tetrathiafulvalene with halide mercurate anions

Radical cation salts with halide mercurate anions were obtained by the electrochemical oxidation of bis(ethylenedioxo)tetrathiafulvalene (BEDO-TTF), and their conductivity was studied. The compounds (BEDO-TTF)₄Hg₃X₈ (X = Cl or Br), (BEDO-TTF)₄Hg_3.5I₉, and (BEDO-TTF)₂HgBr₃ possess the conductivity of the metallic type down to helium temperatures.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1167–1170, May, 1996.     

Neue schnelle Ionenleiter vom Typ MMIIICl6 (MI = Li,Na, Ag; MIII = In,Y)

Novel Fast Ion Conductors of the Type M M^IIICl₆ (M^I = Li, Na, Ag; M^III = In, Y) The ternary chlorides Li₃InCl₆, Na₃InCl₆, Ag₃InCl₆, and Li₃YCl₆ have been studied by difference scanning calorimetry, high-temperature X-ray, infrared, and high-temperature Raman methods. Impedance spectroscopic measurements exhibit fast ionic conductivity increasing in the sequence Na₃InCl₆ < Li₃YCl₆ < Ag₃InCl₆ < Li₃InCl₆. In the range of 300°C, Li₃InCl₆ is the best lithium ion conductor known so far (σ = 0,2 Ω^?1 cm^?1 at 300°C). With the exception of Na₃InCl₆, the chlorides exhibit complicated order-disorder phase transitions.     

Insights on the origin of the structural phase transition in BaV10O15 from electronic structure calculations and the effect of Ti-doping on its structure and electrical transport properties

Band structure calculations at the level of LMTO-ASA provide insight into the electronic structure of BaV₁₀O₁₅ and the origin of the structural phase transition. A crystal orbital Hamiltonian population/integrated crystal orbital Hamiltonian population analysis provides evidence that the crystallographic phase transition is driven by V-V bond formation. As well, the energy bands near the Fermi level are very narrow, <1 eV, consistent with the fact that the observed insulating behavior can be due to electron localization via either Mott-Hubbard correlation and/or Anderson disorder. The partial solid solution, BaV_10−xTi_xO₁₅, was examined to study the effect of Ti-doping at the V sites on the structure and electronic transport properties. In spite of the non-existence of “BaTi₁₀O₁₅”, the limiting x=8, as indicated by a monotonic increase in the cell volume and systematic changes in properties. This limit may be due to the difficulty of stabilizing Ti²⁺ in this structure. For x=0.5 both the first order structural phase transition and the magnetic transition at 40 K are quenched. The samples obey the Curie-Weiss law to x=3 with nearly spin only effective moments along with θ values which range from −1090 K (x=0.5) to −1629 K (x=3). For x>3 a very large, ∼2×10⁻³ emu/mol, temperature independent (TIP) contribution dominates. Conductivity measurements on sintered, polycrystalline samples show semiconducting behavior for all compositions. Activation energies for Mott hopping derived from high temperature data range from ∼0.1 eV for x=0-1 and fall to a plateau of 0.06 eV for x=3-7. Low temperature data for x=3, 5 and 7 show evidence for Mott variable range hoping (VRH) with a T^1/4 law and in one case between 5 and 17 K, a Efros-Shklovskii correlated hopping, T^1/2 law, was seen, in sharp contrast to BaV₁₀O₁₅ where only the E-S law was observed up to 75 K. Seebeck coefficients are small (<35 μV/K), positive, roughly TIP and increase with increasing x up to x=5. This may point to a Heikes hopping of holes but a simple single carrier model is impossible. The compositions for x>3 are remarkable in that local moment behavior is lost, yet a metallic state is not reached. The failure of this system to be driven metallic even at such high doping levels is not fully understood but it seems clear that disorder induced carrier localization plays a major role.     

超支化聚氨酯固体电解质导电性能的光谱学研究

用超支化聚氨酯 +线性聚氨酯作为基体 ,LiClO4作为离子源制得聚合物固体电解质 .用Raman光谱 ,FTIR光谱等光谱学方法研究了聚合物电解质中盐离子和聚合物基团之间的相互作用 .研究表明超支化聚氨酯对盐有较好的溶解作用 .研究还表明超支化聚氨酯加入有利于提高体系的电导率     

凝胶型聚合物电解质的电导率与温度的关系

凝胶型聚合物电解质的电导率与温度的关系孙晓光，林云青，齐力，景遐斌，王佛松（中国科学院长春应用化学研究所长春１３００２２）关键词凝胶电解质，离子电导率，活化能无定形聚合物电解质电导与温度的依赖关系一般可用Ｖｏｇｅｌ－Ｔａｍｍａｎ－Ｆｕｌｃｈｅｒｃ（Ｖ...     

电场对含高氯酸锂盐的互穿网络高分子快离子导体的电导的影响

研究了直流电场对含ＬｉＣｌＯ４的聚氧化乙烯（ＰＥＯ）４００与环氧树脂形成的液晶态互穿网络高分子忆禽子导体的电导率的影响。在室温至９０℃范围内，电导率随外加电压增加面降低。外加电压越高，对电导率变化的影响越大。     

Effect of pressure on the thermal conductivity of polymers

The thermal conductivity of polyolefins and halogen-substituted polymers was studied in a broad temperature interval spanning both solid and melt states, in the range of pressures from 0.1 up to 100 MPa with the aid of a high-pressure-calorimeter in the continuous heating regime. Treatment of data on the pressure dependence of the thermal conductivity of melts in terms of Barker's equation yielded the values of quasilattice Grueneisen parameter _B which exhibited the same dependence on molecular structure of a polymer as the parameter 3C/p from the Simha-Somcynsky equation of state (number of external degress of freedom per chain repeat unit). Analysis of the dependence of the thermal conductivity of polyethylene on the degree of crystallinity revealed the inadequacy of the current two-phase model which does not account for the microheterogeneity of the amorphous phase. It was concluded that interchain heat transfer makes the dominant contribution to the thermal conductivity of polymers both in amorphous and in crystalline states.

---

Zusammenfassung Mit Hilfe eines Hochdruck-- Kalorimeters mit kontinuierlicher Aufheizung wurde im Druckintervall 0,1 bis 100 MPa und in einem breiten Temperaturbereich, in den sowohl feste als auch flüssige Zustände gehören, die Wärmeleitfähigkeit von Polyolefinen und halogenierten Polymeren untersucht. Drückt man die Druckabhängigkeit der Wärmeleitfähigkeit der Schmelzen mit Hilfe der Barkerschen Gleichung aus, erhält man die Werte für den Quasigitter Grueneisen-Parameter_b, der die gleiche Abhängigkeit von der Molekular-struktur eines Polymers zeigt, wie der Parameter 3C/p aus der Gleichung von Simha-Somcynsky (Zahl der externen Freiheitsgrade geteilt durch Kettenstruktureinheit). Eine Untersuchung der Abhängigkeit der Wärmeleitfähigkeit von Polyethylen von Kristallinitäts-grad zeigt die Mängel dieses Zwei-Phasen-Modelles, was die Mikroheterogenität der amorph-en Phase nicht erklärt. Man zog die Schlußfolgerung, daß ein Wärmetransport zwischen den Ketten sowohl im amorphen als auch im kristallinen Zustand den entscheidenden Beitrag zur Wärmeleitfähigkeit von Polymeren liefert.

     

Chemically Sensitive Field‐Effect Transistors and Chemiresistors: New Materials and Device Structures

Electronic sensor technology remains of widespread and intense interest. There are compelling needs to detect chemical species ranging from small molecules dispersed in the gas phase to complex biopolymers in aqueous solution. This review describes some recent advances in three main areas: chemically sensitive resistors (chemiresistors, CRs) including inorganic and organic based devices, field effect transistors (FETs) with semiconducting layers and/or gates with chemical sensitivity, and sensors based on the differential conductivity of nanotubes and nanowires. Results reported in the last two to three years are emphasized, highlighting some current trends in the development of sensors for applications such as diagnostics, process monitoring, and security.     

Electrical Behavior of New Orthophosphates Na2M3(PO4)3 (M3=GaMn2, GaCd2, InMn2 and FeMnCd) with Alluaudite-Like Structure

New sodium orthophosphates of general formula Na₂M₃(PO₄)₃ belonging to the alluaudite-type structure have been synthesized and characterized by neutron and X-ray powder diffraction. The nature of the M₃ elements (M₃=GaMn₂, GaCd₂, InMn₂ and FeMnCd) was chosen in order to analyze their influence on electrical and magnetic properties. The conductivity of these materials was measured by the complex impedance method and the transport mechanism was studied from complex permittivities and modulus formalism. Electrical results including charge/discharge experiments showed two main behaviors: GaCd₂ and FeMnCd behave as purely ionic conductors whereas GaMn₂ and InMn₂ are mixed ionic-electronic conductors. The magnetic susceptibility data reveal the antiferromagnetic behavior of FeMnCd, InMn₂ and GaMn₂, with a weak ferromagnetic transition at low temperatures.