Efficient Synthesis of Cyclic Block Copolymers by Rotaxane Protocol by Linear/Cyclic Topology Transformation

High‐yielding synthesis of cyclic block copolymer (CBC) using the rotaxane protocol by linear‐cyclic polymer topology transformation was first demonstrated. Initial complexation of OH‐terminated sec‐ammonium salt and a crown ether was followed by the successive living ring‐opening polymerizations of two lactones to a linear block copolymer having a rotaxane structure by the final capping of the propagation end. CBC was obtained in a high yield by an exploitation of the mechanical linkage through the translational movement of the rotaxane component to transform polymer structure from linear to cyclic. Furthermore, the change of the polymer topology was translated into a macroscopic change in crystallinity of the block copolymer.     

Photopolymerization of enzymatically synthesized methacrylated poly(caprolactone) with poly(ethylene glycol) macromonomer

Polycaprolactone (PCL) based α,ω-methacrylated macromonomer (DMPCL) was synthesized via enzymatic ring-opening polymerization (eROP) by using Novozyme 435 as the enzyme immobilized catalyst. DMPCL was further photopolymerized with monofunctional poly(ethylene glycol) methyl ether methacrylate (PEGMA-950) macromonomer and trimethylolpropane triacrylate (TMPTA) as tri-functionalized crosslinking agent in glass vials when CHCl₃ was the solvent and Irgacure 819 was the photoinitiator. Ultraviolet (UV) Light Emitting Diode (LED) bulbs enabled photoinduced reactions at room temperature with low heat generation and high reaction efficiency. The obtained gels were characterized with Fourier Transform Infrared Spectroscopy (FT-IR) and Differential Scanning Calorimetry (DSC). DMPCL participated as an effective crosslinking agent in the photopolymerization of PEGMA-950. Combined usage of DMPCL and PEGMA-950 resulted in significantly more effective polymerization than the separate photopolymerizations of these macromonomers.     

Unbridged bidentate aluminum complexes supported by diaroylhydrazone ligands: Synthesis,structure and catalysis in polymerization of ε-caprolactone and lactides

A series of novel diaroylhydrazone aluminum complexes have been synthesized and well-defined structurally, and their catalytic performance in the polymerization of ε-caprolactone and lactides have also been evaluated. Complexes [(L^1–4)₂AlMe] ( 1 – 4 ) {[L¹ = (3,5-^tBu₂–2-OMe-C₆H₂)CH=NNCOC₆H₅], [L² = (3,5-^tBu₂–2-OMe-C₆H₂)CH=NNCO(C₆H₄–4-OCH₃)], [L³ = (3,5-^tBu₂–2-OMe-C₆H₂)CH=NNCO(C₆H₄–4-Br)] and [L⁴ = (2-OMe-C₆H₄)CH=NNCO(C₆H₄–4-^tBu)]} were prepared through treatment of AlMe₃ with the corresponding proligands L^1–4H in molar ratios of 1: 1 or 1: 2. Chemical structures of all the complexes were well-defined by elemental analysis, NMR spectra as well as single-crystal X-ray study. Complexes [(L^1–4)₂AlMe] ( 1 – 4 ) in this work represent the first examples of aluminum complexes of aroylhydrazone ligands with crystallographic characterization. Specifically, they are all in monomeric form with a penta-coordinated aluminum center, including two approximately co-planar five-membered metallacycles with aluminum. Introduced bulky tert-butyl substituents in aroylhydrazone ligands could affect the geometry around the central metal which is a distorted square-based pyramid in complexes 1 – 3 while being a trigonal bipyramidal in complex 4 , thus affecting their catalytic behaviors. The complexes can successfully catalyze the ring-opening polymerization of ε-caprolactone and _L-lactide under mild conditions without any activator. In addition, complexes 1 – 4 could also polymerize rac-lactide, affording atactic polylactides with high conversions and good controllability in relatively short reaction time.     

Poly(ɛ-caprolactone-co-ω-pentadecalactone) electrospun fibers

1. Download : Download high-res image (96KB)
2. Download : Download full-size image

     

Spirocyclic bisphenoxides of Ge,Zr, and Sn as catalysts for ring-expansion polymerizations of l- and meso-lactide

Spirocyclic phenoxides of germanium, zirconium, and tin were prepared from 2,2′-dihydroxybiphenyl and 2,2′-dihydroxy-1,1′-binaphthyl. Ring-expansion polymerizations of l -lactide are mainly studied at 160 or 180 °C. The reactivity of the catalysts increases in the order: Zr < Ge < Sn. Regardless of catalyst, the weight-average molecular weights (M_w) never exceed 50,000 g mol⁻¹. The resulting poly(l -lactide)s are optically pure and have a cyclic architecture. Decreasing temperature and time favor formation of even-numbered cycles, and at 102° cyclics, almost free of odd-numbered rings are obtained. Analogous polymerizations of meso-lactide give similar results >120 °C, but different results at 100 or 80 °C. Surprisingly, bell-shaped narrow molecular weight distributions are obtained <140 °C, resembling the pattern of living polymerizations found for alcohol-initiated polymerizations. An unusual transesterification mechanism yielding narrow distributions of odd-numbered cycles is discovered too. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2730–2738     

Investigation on the Ring-Opening Reactions of 3-(1H-1,2,4-Triazol-1-yl)1,5-benzothiazepines with Arylonitrile Oxides

Abstract

Novel ring opening compounds, (Z)-2-((Z)-((E)-1,3-diaryl-2-(1H-1,2,4-triazol-1-yl)allylidene)amino)aryl N-hydroxybenzimidothioates 4a–r, were obtained from the reaction of 2,4-diaryl-3-(1H-1,2,4-triazol-1-yl)-2,5-dihydro-1,5-benzothiazepines 3a–f and arylonitrile oxides. The structure of these products has been elucidated by spectroscopic analysis and, in one case, X-ray crystallographic analysis. According to the result, it was presumed that this reaction did not proceeded through 1,3-dipolar cycloaddition reaction.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.

GRAPHICAL ABSTRACT      

Preparation and Characterization of Linear and Miktoarm Star Side-Chain Liquid Crystalline block Copolymers with p-Methoxyazobenzene Moieties via a Combination of ATRP and ROP

One linear and two miktoarm star side-chain liquid crystalline (LC) block copolymers with p-methoxyazobenzene moieties were prepared by a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP) techniques. First, ROPs of ε -caprolactone (ε -CL) were carried out catalyzed by Sn(Oct)₂ using three multifunctional initiators, hydroxyethyl 2-bromoisobutyrate (AB type), 3-hydroxy-2-(hydroxymethyl)-2-methylpropyl 2-bromo-2-methylpropanoate (A₂B type) and 2,2-bis(hydroxymethyl)propane-1,3-diyl bis(2-bromo-2-methylpropanoate) (A₂B₂ type), at 110°C in toluene, respectively. Second, the previously obtained poly(ε -caprolactone)s (PCLs) with bromines functionalities were used as the macroinitiators to conduct ATRP of 6-(4-methoxy-4-oxy-azobenzene) hexyl methacrylate (MMAZO) with CuBr/PMDETA as the catalyst systems at 85°C in anisole to prepare the linear and miktoarm side-chain LC block copolymers (PCL-b-PMMAZO, (PCL)₂-(PMMAZO) and (PCL)₂-(PMMAZO)₂). The produced polymers were well-controlled with the controlled molecular weights and the relatively narrow molecular weight distributions (M _w/M _n ≤ 1.35). The structures of the obtained polymers were all characterized by NMR, FT-IR and GPC analysis. Furthermore, the LC properties of the linear and miktoarm star block copolymers were also investigated by differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM).     

Synthesis and Characterization of Four-Arm Star Poly(ϵ-caprolactone)-Block-Poly(cyclic-carbonate methacrylate) Copolymers by Combining Ring-Opening Polymerization With Atom Transfer Radical Polymerization

Well-defined four-arm star poly(?-caprolactone)-block-poly(cyclic carbonate methacrylate) (PCL-b-PCCMA) copolymers were synthesized by combining ring-opening polymerization (ROP) with atom transfer radical polymerization (ATRP). First, a four-arm poly(?-caprolactone) (PCL) macroinitiator [(PCL-Br)₄] was prepared by the ROP of ?-CL catalyzed by stannous octoate at 110°C in the presence of pentaerythritol as the tetrafunctional initiator followed by esterification with 2-bromoisobutyryl bromide. The sequential ATRP of CCMA monomer was carried out by using the (PCL-Br)₄ tetrafunctional macroinitiator (MI) and in the presence of CuBr/2, 2′-bipyridyl system in DMF at 80°C with [(MI)]:[CuBr]:[bipyridyl] = 1:1:3 to yield block polymers with controlled molecular weights (M_n (NMR) = 10700 to 27300 g/mol) by varying block lengths and with moderately narrow polydispersities (M_w/M_n = 1.2–1.4). Block copolymers with different PCL: PCCMA copolymer composition such as 50:50, 70:30 and 74:26 were prepared with good yields (48-74%). All these block copolymers were well characterized by NMR, FTIR and GPC and tested their thermal properties by DSC and TGA.     

Study on the Regioselectivity of Rhodium-Catalyzed Ring Opening Reactions of C1-Substituted 7-Oxabenzonorbornadienes with Boronic Acids

An optimized condition for the rhodium-catalyzed ring-opening reaction of C₁-substituted oxabicyclic alkenes with aryl boronic acids was developed and the effect of aryl boronic acid as well as the effect of C₁ substitution on the oxabicyclic alkenes was studied. Aryl boronic acids carrying electron-donating substituents provided the ring-opened products in excellent yields regardless of the position, while electron-withdrawing substituents were more susceptible to steric interactions. Although two different regioisomers are possible, all the rhodium-catalyzed ring-opening reactions of C₁ substituted oxabicyclic alkenes studied with aryl boronic acids were found to be highly regioselective, giving single regioisomers in all cases.