1,5-Electrocyclisation of azomethine ylides leading to pyrrolo[2,1-a]isoquinolines—concise construction of the lamellarin skeleton

A new, general route to the 1,2-diaryl-substituted pyrrolo[2,1-a]isoquinolines has been developed via the 1,5-dipolar electrocyclisation reactions of azomethine ylides derived from readily available stilbenic acid derivatives. This method was applied to the concise construction of a lamellarin skeleton.     

(Salen)Ti(IV)-Catalyzed Asymmetric Ring-opening of meso Epoxides Using Dithiophosphorus Acid as the Nucleophile

As an important strategy for the formation of 1,2-bifunctionalized systems theasymmetric ring-opening of epoxides with different nucleophiles has drawn muchattention from the organic chemists. A wide variety of nucleophiles are utilized in theaforemention…     

Cationic polymerizations of substituted 2-methylene-1,3-dioxocyclic acetals, 2-methylene-1,3-dithiolane and copolymerization of 2-methylene-1,3-dithiolane with 4-(t-butyl)-2-methylene-1,3-dioxolane1

Carbon black-supported sulfuric acid or BF₃·Et₂O-initiated polymerizations of 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (1), 2-methylene-4-phenyl-1,3-dioxolane (2), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (3) were performed. 1,2-Vinyl addition homopolymers of 1–3 were produced using carbon black-supported H₂SO₄ initiation at temperatures from 0°C to 60°C whereas both ring-opened and 1,2-vinyl structural units were present in the polymers using BF₃·Et₂O as an initiator. Cationic polymerizations of 2-methylene-1,3-dithiolane (4) and copolymerization of 4 with 2-methylene-4-(t-butyl)-1,3-dioxolane (5) were initiated with either carbon black-sulfuric acid or BF₃·Et₂O. Insoluble 1,2-vinyl addition homopolymers of 4 were obtained upon initiation with the supported acid or BF₃·Et₂O. A soluble copolymer of 2-methylene-1,3-dithiolane (4) and 4-(t-butyl)-2-methylene-1,3-dioxolane (5) was obtained upon BF₃·Et₂O initiation. This copolymer is composed of three structural units: a ring-opened dithioester unit, a 1,2-vinyl-polymerized 1,3-dithiolane unit, and a 1,2-vinyl polymerized 4-(t-butyl)-1,3-dioxolane unit. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2823–2840, 1999     

BF3·OEt2-initiated polymerization of 2-methylene-1,3-dioxepanes

BF₃·OEt₂-initiated polymerizations of 2-methylene-1,3-dioxepane gave polymers composed of both ring-retained and ring-opened structures. The ring-opening content increased with an increase in polymerization temperature. Poly(4,7-dimethyl-2-methylene-1,3-dioxepane) propagated slower during BF₃·OEt₂-initiated polymerization and had a lower ring-opened content than poly(2-methylene-1,3-dioxepane). The type of acid initiator used also affected the amount of ring opening observed. Stronger acids gave less ring opening. Attempted BF₃·OEt₂-initiated copolymerizations of these seven-membered ring cyclic ketene acetals with isobutyl vinyl ether at room temperature resulted in formation of the two homopolymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 873–881, 1998     

Cyclic(arylene ether) oligomers containing the phenylphosphine oxide moiety

A series of cyclic(arylene ether) oligomers containing the phenylphosphine oxide moiety has been synthesized by reaction of bis(4-fluorophenyl)phenylphosphineoxide with dihydroxy compounds 1a–d as well as 1,2-dihydro-4-(4-hydroxyphenyl) (2H)phthalazin-1-one in DMF in the presence of anhydrous K₂CO₃ under high dilution conditions. These cyclic oligomers are amorphous and have high solubility in organic solvents. The MALDI-TOF-MS technique has been used as a powerful tool to analyze these cyclic systems. The cyclic(arylene ether) oligomers readily undergo anionic ring-opening polymerization in the melt at 350°C by using potassium 4,4′-biphenoxide as the initiator, affording linear, high molecular weight poly(arylene ether)s containing the phenylphosphine oxide moiety. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 519–526, 1998     

三（3,5-二叔丁基水杨醛缩苯乙胺）镧引发ε-己内酯开环聚合研究

首次采用三（3,5-二叔丁基水杨醛缩苯乙胺）镧[La（OPEBS）3]作为单组份引发剂用于引发ε-己内酯（ε-CL）的开环聚合.系统研究了溶剂、反应温度、单体/引发剂比例、单体浓度和反应时间对聚合反应的影响.研究结果表明La（OPEBS）3具有很高的催化活性,可以在反应温度为40℃,[-εCL]/[La]摩尔比为1 000,反应时间为40 min的聚合条件下得到分子量约为5.84×104,产率为99.9%的聚己内酯（PCL）.1H NMR结果显示己内酯单体是通过酰-氧键的断裂插入增长链.     

Thermodynamic and Kinetic Polymerizability of Cyclic Esters

Recent advances in the controlled ring-opening polymerization (ROP) of cyclic aliphatic esters are reviewed with a particular attention to thermodynamics and kinetics of the polymerization of industrially important monomers, namely: lactide (LA), 1,4-dioxan-2-one (DX), and ϵ-caprolactone (CL). For comparison, polymerization of β-lactones is discussed. Progress in stereocontrolled polymerization of monomers bearing centers of chirality [LA and β-butyrolactone (BL)] is also briefly reviewed.     

SYNTHESIS AND CATIONIC RING-OPENING POLYMERIZATION OF 1, 4-ANHYDRO-2, 3-DI-O-(P-AZIDOBENZYL)-α-D-RIBOPYRANOSE

New highly stereoregular 2, 3 -di- O-(p-azidobenzyl )-(1 →5 ) - α-D -ribofuranan was synthesized byselective ring-opening polymerization of 1, 4-anhydro-2, 3 - di-O -(p-azidobenzyl )-α-D -ribopyranose(ADABR) using phosphorus pentafluoride or tin tetrachloride as catalyst at low temperature indichloromethane. The monomer was obtained by the reaction of p - bromomethyl -phenyleneazide with 1, 4 -anhydro-α-D-ribose in DMF. The structure of poly(ADANR) was identified by specific rotation and ~(13)C-NMR spectroscopy. Acid chloride-AgCl_4 complex catalyst such as CH_2=C(CH_3)C~+OClO_4~- used in thepolymerization resulted in polymers with mixed structures, i.e. (1→5)-α-D-ribofuranosidic and (1→4)-β-D-ribopyranosidic units. However, with C_6H_5C~+OClO_4~- as catalyst, pure (1→5)-α-D-ribofuranan was obtained.The effects of catalyst, polymerization temperature and time on polymer stereoregularity were examined, andthe mechanism of the ring-opening polymerization was discussed.     

环氧乙烷环氧丙烷开环聚合反应动力学研究

环氧乙烷和环氧丙烷由于具有较高的环张力,因而容易发生开环聚合。本文综述了环氧乙烷合环氧丙烷开环聚合反应的动力学研究进展,考察了环氧乙烷和环氧丙烷开环聚合反应的机理,分别讨论了各类催化剂体系中环氧乙烷和环氧丙烷开环聚合的动力学常数、两者的竞聚率及开环聚合产物的分子量分布,并指出了开环聚合反应动力学研究对于环氧乙烷和环氧丙烷的开环聚合研究及工业应用的重要性。     

开环聚合接枝改性木质素

作为自然界储量丰富的生物质资源之一,木质素尚未得到充分利用,成为掣肘生物化工发展的挑战。利用木质素丰富的功能基团进行接枝聚合改性,已成为木质素高值化利用的一个重要途径。开环聚合是一种温和、高效的聚合方法,可以将脂肪族聚酯链段引入到木质素中,提高材料的溶解性、相容性和可降解性,拓展木质素的应用范围。本文关注多催化条件下丙交酯、己内酯等环状单体通过开环聚合对木质素进行接枝改性的研究进展,同时对木质素改性材料的性能、应用以及发展前景进行了探讨。