一种微波加热装置的风冷散热研究

微波加热装置工作过程会散发大量的热量,如果不能及时排出,会造成输出功率的下降.本文以九个磁控管加热单元组成的微波加热装置为研究对象,首先提出一种风冷散热结构设计,接着通过Fluent热仿真软件验证结构设计的合理性,然后通过对比分析加热装置进风口位置、面积大小等因素对散热效果的影响,对散热结构进行改进,进一步提高了内部磁...     

一种基于MEMS技术的PDMS微型分流器的研制

本文采用三层光刻工艺制作了基于聚二甲基硅氧烷(Polydimethylsiloxane,PDMS)的V形微分流器。引入牺牲层技术,解决了不同胶层间的界面互融问题,讨论了不同胶层间显影液对图形质量的影响。所制得的分流器工艺简单,结构形貌良好,具有良好的微流控制作用,满足器件使用要求。     

激光指示器光轴调校技术

利用反射式光学系统对激光指示器的光轴进行了调校。提出了激光指示器及观瞄装置的光轴校正方案,并建立了调校装置。该装置由离轴抛物面反射镜、十字靶标、背景光源、图像采集装置及其它附件组成。对调校装置的测量精度进行了标定和计算。结果表明,该装置的测量精度可达到0.05mrad。利用该装置对激光指示器的光轴进行了调校,并给出了系统示意图和测试效果。     

天文观测相机低噪声CCD视频处理电路的分析与设计

在讨论天文观测相机低噪声视频处理电路的基础上,对前置放大、差分放大、可编程增益放大、相关双采样及16bit模数转换等关键组成部分进行了分析,给出各组成部分的设计方法。对所设计的低噪声视频处理电路进行了PSPICE仿真和实验测试,仿真和实验结果表明,该视频处理电路在本身引入噪声较小的同时,有效地抑制了CCD的复位噪声和1/f等低频噪声,使天文观测相机的整机噪声<15e-,达到了指标要求。     

Hermetic Seal of Organic Light Emitting Diode with Glass Frit

The components of OLED encapsulation with hermetic sealing and a 1026-day lifetime were measured by PXI-1033. The optimal characteristics were obtained when the thickness of the TPBi layer was 20 nm. This OLED obtained a maximum luminance (Lmax) of 25,849 cd/m² at a current density of 1242 mA/cm², an external quantum efficiency (EQE) of 2.28%, a current efficiency (CE) of 7.20 cd/A, and a power efficiency (PE) of 5.28 lm/W. The efficiency was enhanced by Lmax 17.2%/EQE 0.89%/CE 42.1%/PE 41.9%. The CIE coordinates of 0.32, 0.54 were all green OLED elements with wavelengths of 532 nm. The shear strain and leakage test gave results of 16 kgf and 8.92 × 10⁻⁹ mbar/s, respectively. The reliability test showed that the standard of MIL-STD-883 was obtained.     

空间雷电探测实时采集定位系统

星载雷电探测定位系统是利用光学探测器探测闪电事件的地理位置和光脉冲波形,系统采用CPLD+DSP的数字图像处理方案,利用了CPLD复杂逻辑可编程特性将系统的部分或全部功能集成在一片CPLD上,减小了系统硬件复杂程度,节省了印制版空间.利用DSP高速数字信号处理特性完成实时处理图像数据的功能.系统用CPLD完成图像信号的采集、编码和存储控制,缩小了星载设备体积,简化了电路结构;用DSP完成大量图像数据处理工作,提高了系统工作的实时性.     

Y掺杂WS2二维材料的第一性原理研究

WS₂由于其优异的物理和光电性质引起了广泛关注。本研究基于第一性原理计算方法,探索了本征单层WS₂及不同浓度W原子替位钇(Y)掺杂WS₂的电子结构和光学特性。结果表明本征单层WS₂为带隙1.814 eV的直接带隙半导体。进行4%浓度(原子数分数)的Y原子掺杂后,带隙减小为1.508 eV,依旧保持着直接带隙的特性,随着Y掺杂浓度的不断增大,掺杂WS₂带隙进一步减小,当浓度达到25%时,能带结构转变为0.658 eV的间接带隙,WS₂表现出磁性。适量浓度的掺杂可以提高材料的导电性能,且掺杂浓度增大时,体系依旧保持着透明性并且在红外光和可见光区对光子的吸收能力、材料的介电性能都有着显著提高。本文为WS₂二维材料相关光电器件的研究提供了理论依据。     

Li原子掺杂C28单分子器件的热自旋输运性质

利用第一性原理对Li原子掺杂C₂₈的分子器件的热自旋输运性质进行了计算。在不同的温度场下,上下自旋分别为Li原子掺杂C₂₈的分子器件中的空穴和电子提供了输运通道,在MJ₁和MJ₃分子器件中,热自旋电流随着温度增加而增大,但在MJ₂分子器件中,热自旋电流先增大再减小。三种分子器件都出现了自旋塞贝克效应,MJ₂还出现了负微分电阻现象,利用费米-狄拉克分布和自旋输运谱对其物理机理进行了解释。根据Li掺杂C₂₈的单分子器件的热自旋输运性质,可设计新的自旋纳米器件。     

Wave-based analysis of dual acoustic black holes for anechoic termination of shock testing devices

Shock testing is an important issue for the survivability of an equipment under shock environment in aerospace and military industries. One of the problems faced in conventional shock testing devices is the need for redesigning of the geometry whenever the responses to different shock environments are tested. To circumvent the redesigning processes, a structure with two ‘acoustic black holes (ABHs)’ on both ends, referred to as the beam with dual ABHs, is proposed as a shock testing device. The beam with dual ABHs is capable of simulating diverse shock environments by controlling the applied force because it can be regarded as an infinite beam at high frequency range with the aid of the anechoic terminations by the ABHs. To systematically investigate the beam with dual ABHs, we develop a wave-based method that uses the reflection matrix of an ABH to perform free and forced vibration analyses. From the analyses on frequency response function and shock response spectrum of the beam with dual ABH, it is suggested that the beam with dual ABHs is feasible as a semi-permanent shock testing device.     

Thienylmethylene Oxindole Based Conjugated Polymers via Direct Arylation Polymerization and Their Electrochromic Properties

Direct arylation methods have been used to polymerize thienylmethylene oxindoles(TEIs) and 3,3-bis[[(2-ethylhexyl)oxy]methyl]-3,4-dihydro-2 H-thieno-[3,4-b][1,4]dioxepin(ProDOT) for new donor-acceptor conjugated polymers. The polymers exhibited blue hues in neutralstate with distinct color-to-transmissive reversible electrochromic switching under applied potentials from 0 V to +1.5 V, and showed high coloration efficiencies(436-438 cm~2·C~(-1)) in near-infrared regions with high switching speeds around 1-2 s under ambient conditions.