Engineering of Supported Nanomaterials

This brief review analyzes the parameters that can be used to guide the generation of hierarchic systems that include inorganic and/or biological nanoscale objects. Importance of interface effects and geometrical factors are underlined. The mutual influence between the substrate and the deposited material is an important factor to determine the most appropriate set of parameters for the synthesis of nanomaterials with desirable properties for industrial applications.     

Activity of AC electrokinetically immobilized horseradish peroxidase

Dielectrophoresis (DEP) is an AC electrokinetic effect mainly used to manipulate cells. Smaller particles, like virions, antibodies, enzymes, and even dye molecules can be immobilized by DEP as well. In principle, it was shown that enzymes are active after immobilization by DEP, but no quantification of the retained activity was reported so far. In this study, the activity of the enzyme horseradish peroxidase (HRP) is quantified after immobilization by DEP. For this, HRP is immobilized on regular arrays of titanium nitride ring electrodes of 500 nm diameter and 20 nm widths. The activity of HRP on the electrode chip is measured with a limit of detection of 60 fg HRP by observing the enzymatic turnover of Amplex Red and H₂O₂ to fluorescent resorufin by fluorescence microscopy. The initial activity of the permanently immobilized HRP equals up to 45% of the activity that can be expected for an ideal monolayer of HRP molecules on all electrodes of the array. Localization of the immobilizate on the electrodes is accomplished by staining with the fluorescent product of the enzyme reaction. The high residual activity of enzymes after AC field induced immobilization shows the method's suitability for biosensing and research applications.     

过渡金属-联咪唑-Dawson型钨磷酸盐杂化化合物的酶固定化性能

利用水热法和直接沉淀法, 设计合成了5例由过渡金属(TM)-联咪唑配阳离子与Dawson型钨磷酸阴离子构成的多金属氧酸盐(POM)基有机-无机杂化化合物[Ni(H₂biim)₃]₄[Ni(H₂biim)₂(P₂W₁₈O₆₂)₂]·2H₂O(1), [Co^III(H₂biim)₃]₂[P₂W₁₈O₆₂]·8H₂O(2), [Cu(H₂biim)₂]₃[P₂W₁₈O₆₂]·4H₂O(3), [Co^II(H₂biim)₃]₂H₂[P₂W₁₈O₆₂]·9H₂O(4)和 [Ni(H₂biim)₃]₃[P₂W₁₈O₆₂]·2H₂O(5); 并利用X射线单晶衍射分析(SC-XRD)、 红外光谱(IR)和热重-差热分析 (TG-DTA)等对其进行了表征. 化合物1~5作为载体用于固定辣根过氧化物酶(HRP)时, 显示出了较高的酶固定化能力. 另外, 利用圆二色光谱(CD)和激光扫描共聚焦显微镜(LSCM)等方法评价了固定化酶HRP/1~HRP/5的重复使用性、 储存稳定性和检测过氧化氢(H₂O₂)的性能. 由于该类POMs与HRP间存在强的相互作用, 利用简单的物理吸附法即可实现POMs对HRP的固载. POMs对酶的固定不但提高了HRP对使用及储存环境的耐受性, 同时也拓展了POMs在酶固定化领域的应用.     

电子功能外延薄膜的电沉积

电沉积作为一种在温和条件下从溶液中合成材料的技术已被广泛应用于在导体和半导体基底表面合成各种功能材料。电沉积一般由人为施加于基底的电刺激（如：施加电位/电流）来触发。这种电刺激通过氧化或还原靠近基底表面的溶液层内部的离子、 分子或配合物从而使该溶液层偏离其热力学平衡状态,随后引起目标产物在基底表面的沉积。在电沉积过程中, 许多实验参数都可能从不同的方面对沉积物的物化性质造成影响。迄今为止,已通过电沉积制备出多种单质（包括金属和非金属单质）、 化合物（例如：金属氧化物、金属氢氧化物、 金属硫化物等）以及复合材料。电沉积制备的这些材料大多为多晶、 织构或外延薄膜的形式。其中, 外延薄膜是一种具有特定的面外和面内晶体生长取向且其晶体取向受基底控制的类单晶薄膜。由于外延薄膜中高度有序的原子排列,它们常呈现出独特的电磁性质。本文总结了常见的电沉积合成路线及影响沉积物外延生长的关键实验因素。此外, 本文简要介绍了用于表征外延薄膜的技术。最后, 本文还讨论了一些采用电沉积制备的具有特殊电子、 电磁及光电特性的功能外延薄膜。     

Immobilization of Eversa® Transform via CLEA Technology Converts It in a Suitable Biocatalyst for Biolubricant Production Using Waste Cooking Oil

The performance of the previously optimized magnetic cross-linked enzyme aggregate of Eversa (Eversa-mCLEA) in the enzymatic synthesis of biolubricants by transesterification of waste cooking oil (WCO) with different alcohols has been evaluated. Eversa-mCLEA showed good activities using these alcohols, reaching a transesterification activity with isoamyl alcohol around 10-fold higher than with methanol. Yields of isoamyl fatty acid ester synthesis were similar using WCO or refined oil, confirming that this biocatalyst could be utilized to transform this residue into a valuable product. The effects of WCO/isoamyl alcohol molar ratio and enzyme load on the synthesis of biolubricant were also investigated. A maximum yield of around 90 wt.% was reached after 72 h of reaction using an enzyme load of 12 esterification units/g oil and a WCO/alcohol molar ratio of 1:6 in a solvent-free system. At the same conditions, the liquid Eversa yielded a maximum ester yield of only 34%. This study demonstrated the great changes in the enzyme properties that can be derived from a proper immobilization system. Moreover, it also shows the potential of WCO as a feedstock for the production of isoamyl fatty acid esters, which are potential candidates as biolubricants.     

Improved CE(SDS)-CZE-MS method utilizing an 8-port nanoliter valve

Capillary sieving electrophoresis utilizing SDS (CE(SDS)) is one of the most applied methods for the analysis of antibody (mAb) size heterogeneity in the biopharmaceutical industry. Inadequate peak identification of observed protein fragments is still a major issue. In a recent publication, we introduced an electrophoretic 2D system, enabling online mass spectrometric detection of generic CE(SDS) separated peaks and identification of several mAb fragments. However, an improvement regarding system stability and handling of the approach was desired. Here, we introduce a novel 8-port valve in conjunction with an optimized decomplexation strategy. The valve contains four sample loops with increased distances between the separation dimensions. Thus, successively coinjection of solvent and cationic surfactant without any additional detector in the second dimension is enabled, simplifying the decomplexation strategy. Removal efficiency was optimized by testing different volumes of solvents as presample and cationic surfactant as postsample zone. 2D measurements of the light and heavy chain of the reduced NIST mAb with the 8-port valve and the optimized decomplexation strategy demonstrates the increased robustness of the system. The presented novel set-up is a step toward routine application of CE(SDS)-CZE-MS for impurity characterization of proteins in the biopharmaceutical field.     

通过"双离子键"固载于季鏻盐聚合物的[Rh(CO)I3]2–物种在多相乙醇羰基化中的应用

贵金属物种(Rh或Ir络合物)在均相羰基化和氢甲酰化催化过程得到了广泛的应用,但始终存在分离繁琐等问题,其均相多相化可很大程度上简化分离操作,故一直广受重视.单位点催化剂因其具有可与均相相比拟的较高金属利用率和选择性而成为均相多相化的重要研究方向之一.研究发现,在碘物种存在的情况下用于固载金属物种的配位键容易断裂,进而导致金属物种的流失,而通过离子键固载的[Rh(CO)₂I₂]^–物种更加稳定,比如著名的甲醇羰基化“Acetica^TM”工艺中,[Rh(CO)₂I₂]^–负一价阴离子物种是以离子键的方式固定在带有阳离子骨架的甲基化聚乙烯吡啶树脂上.与甲醇羰基化过程类似的乙醇羰基化过程是生产重要化工中间体丙酸的主要途径之一,但该过程的均相多相化始终存在着稳定性差这一关键问题.为了解决这一问题,基于之前将固载于季鏻盐聚合物的[Rh(CO)I₃]^2–应用于甲醇羰基化的工作,我们将类似的季鏻盐聚合物固载Rh基催化剂Rh-TPISP用于多相乙醇羰基化过程,通过多种表征进一步证明了Rh物种和P物种结构,并提出了“双离子键”模型.P的K边XANES证明了聚合物TPISP的季鏻化阳离子骨架特征.HAADF-STEM测试表明Rh-TPISP中的Rh呈现单位点分散的状态.Rh的XPS和XANES结果证明了Rh-TPISP中Rh物种的价态介于0~+1.通过EXAFS的拟合解析给出了[Rh(CO)I₃]^2–活性中心结构.由于[Rh(CO)₂I₂]^–为经典的羰基化活性中心,为了进一步证明该结构的正确性,我们将Rh-TPISP的EXAFS和IR谱图与标样[PPh3Et]⁺[Rh(CO)₂I₂]^–对比发现:在EXAFS谱图中,Rh-TPISP中的Rh-C峰高低于[PPh3Et]+[Rh(CO)₂I₂]^–的Rh-C峰高,而Rh-TPISP中的Rh-I峰高高于[PPh3Et]+[Rh(CO)₂I₂]^–的Rh-I峰高,这就说明Rh-TPISP中Rh物种的Rh-C配位数小于2,而Rh-I配位数大于2;在IR谱图中,标样[PPh3Et]+[Rh(CO)₂I₂]^–中有两个羰基振动峰,与该物种的两个Rh-C配位键相符,而Rh-TPISP中的只有一个羰基振动峰,说明Rh-C配位数为1.因此,Rh-TPISP催化剂的季鏻盐骨架中的每个P物种带有一个正电荷,每个带有两个负电荷的[Rh(CO)I₃]^2–通过与两个[P]⁺的静电作用进行固载,形成“双离子键”结构.该催化剂在固定床乙醇羰基化过程中表现出优异的羰基化活性、选择性和稳定性.在3.5 MPa、195 oC反应近1000 h后,Rh-TPISP催化剂TOF保持在约350 h–1,丙酰基选择性为95%以上,高出所有文献报道的均相和多相乙醇羰基化活性.其较高的活性主要是因为[Rh(CO)I₃]^2–比传统Rh活性相[Rh(CO)₂I₂]^–具有更强的富电子性,而较高的稳定性主要是由于“双离子键”这种强静电作用比“AceticaTM”工艺中“单离子键”更有利于Rh物种的固载.故Rh-TPISP催化剂中的“双离子键”对其优异的催化性能具有极其重要的作用,对后续多相乙醇羰基化的发展具有重要意义.     

Point‐of‐Care Amperometric Testing of Diabetic Marker (HbA1c) Using Specific Electroactive Antibodies

Specific immune detection of glycated hemoglobin is still a great challenge owing to the small epitopic difference between Hemoglobin (Hb) and HbA1c. We report a new electrochemical immunoassay format for point of care testing of HbA1c. A conducting self‐assembled monolayer of mercaptophenyl boronic acid (MPBA) was used as a capture layer for binding of glycated proteins and ferrocene tagged anti‐HbA1c antibody (FcAb) as a tracer molecule on a gold screen printed electrode. Validation of the new HbA1c assay was carried out using 6 clinical samples with known HPLC values and a correlation coefficient of 98 % was observed.     

TEMPO/固载化席夫碱铜配合物共催化剂在分子氧氧化苯甲醇过程中的催化性能

通过大分子反应,将苯甲醛(BA)和邻氨基苯酚(AP)形成的双齿席夫碱配基键合在交联聚甲基丙烯酸缩水甘油酯(CPGMA)微球表面,形成固载有席夫碱配基的载体微球BAAP-CPGMA,再通过与铜盐的配位螯合反应,制备了固载有席夫碱铜配合物的微球[Cu(BAAP)2]-CPGMA.将该固载化铜配合物与均相的2,2,6,6-四甲基哌啶氮氧自由基(TEMPO)构成共催化体系TEMPO/[Cu(BAAP)2]-CPGMA,应用于分子氧氧化苯甲醇的催化氧化过程.我们考察了该共催化体系的催化性能,并探索研究了催化氧化机理.实验结果表明,共催化体系TEMPO/[Cu(BAAP)2]-CPGMA可在温和条件下(室温、常压的氧气)高效地将苯甲醇氧化为苯甲醛(选择性100%,苯甲醛产率93%),并具有良好的循环使用性能.