Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Radical polymerization in the presence of peroxide and reducing agent monomer for branched polymers

In this article, we report the radical polymerization in the presence of peroxide and commercially available or designed reducing agent monomer (RAM) for the preparation of branched poly(methyl methacrylate)s (PMMAs). The reaction behavior of the RAM was studied by NMR. Triple‐detection SEC (TD‐SEC) analysis was used to confirm the branching structure of the prepared PMMAs and to investigate the influence of peroxide concentration and RAM concentration on molecular weight and branched structure. The obtained branched PMMAs exhibited high molecular weights and relatively narrow polydispersities at high conversion of MMA. Interestingly, a significant increase in molecular weight and degree of branching of the obtained polymers are observed in higher BPO concentration, these results are quite different from that reported in the literature. The unique radical polymerization mechanism in the RAM/BPO redox‐initiated radical polymerization system resulted in branched PMMAs with high molecular weights at relatively high RAM and BPO concentrations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 833–840     

Nitroxide‐Mediated Polymerization of Bio‐Based Farnesene with a Functionalized Methacrylate

Farnesene (Far) is a bio‐based terpene monomer that is similar in structure to commercially used dienes like butadiene and isoprene. Nitroxide‐mediated polymerization (NMP) is adept for the polymerization of dienes, but not particularly effective at controlling the polymerization of methacrylates using commercial nitroxides. In this study, Far is statistically copolymerized with a functional methacrylate, glycidyl methacrylate (GMA), by NMP using N‐succinimidyl modified commercial BlocBuilder (NHS‐BB) initiator. Reactivity ratios are determined to be r _Far = 0.54 ± 0.04 and r _GMA = 0.24 ± 0.02. The ability of the poly(Far‐stat‐GMA) chains to reinitiate for chain extension with styrene showed a clear shift in molecular weight and monomodal distribution. Copolymerizations using a new alkoxyamine, Dispolreg 007 (D7), is explored as it is shown to homopolymerize methacrylates, but not yet reported for statistical copolymerizations. Bimodal molecular weight distributions are observed when an equimolar ratio of Far and GMA is copolymerized with D7 due to slow decomposition of the initiator, but chain ends are active as shown by successful chain extension with styrene. Both NHS‐BB and D7 initiators are used to synthesize poly[Far‐b‐(GMA‐stat‐Far)] and poly(Far‐b‐GMA) diblock copolymers. While the NHS‐BB initiated polymer chains have lower dispersity, D7 exhibits more linear polymerization kinetics and maintains more active chain ends.     

Emulsion Copolymerization of Vinyl Acetate and Vinyl Silanes: Kinetics and Development of Microstructure

The batch emulsion copolymerization of vinyl acetate with different vinyl silane functional monomers (vinyl trimethoxysilane [VTMS], vinyl triethoxysilane [VTES], and vinyl silanetriol [VSTO]) is studied. The nature of the silane strongly affects the development of the microstructure and crosslinking ability of the latexes. A combination of techniques (Soxhlet extraction, centrifugation, assymetric‐flow field flow fractionation AF4/MALS/RI) shows that the factor controlling the molar mass and crosslinking density is the degree of hydrolysis of the alkoxysilane, producing higher molar masses and degrees of crosslinking when the degree of hydrolysis is high. Thus, the copolymer containing VSTO produced a very crosslinked latex, the one with VTMS produced a latex with a low degree of crosslinking in the wet state that can yield high degrees of crosslinking upon drying, and the latex with VTES do not produce significant amounts of crosslinking neither before nor after drying.     

An Improved Model for Polyether Production from 1,3‐Propanediol

A dynamic mathematical model is developed for production of Cerenol polyether from 1,3‐propanediol in a batch reactor system. The model accounts for polycondensation reactions and side reactions in the liquid phase and for mass transfer of volatile species to the vapor. Parameters are estimated using measured liquid‐phase concentrations of monomer, oligomers, water, and end groups as well as the mass and composition of condensate collected from the overhead condenser system. The proposed model uses novel probability factors to keep the model equations relatively simple while accounting for the complex influence of superacid catalyst on reaction rates. The model is a significant advance over previous Cerenol models because it better accounts for mass‐transfer rates and for the dynamic behavior of the condenser. In addition, the proposed model accounts for the inhibitory influence of water on polycondensation kinetics due to hydration of hydroxyl ends. The model equations and parameter estimates provide a substantial improvement in fit to the data, especially for long reaction times and high catalyst levels, resulting in a 97% reduction in the value of the weighted least squared objective function compared to equations and parameters from a previous model.     

Synthesis and structure–property relationship of carbazole‐alt‐benzothiadiazole copolymers

A series of four π‐conjugated carbazole‐alt‐benzothiadiazole copolymers (PCBT) were prepared by Suzuki cross‐coupling reaction between synthesized dibromocarbazoles as electron‐rich subunits and 4,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)?2,1,3‐benzothiadiazole as electron‐deficient subunits. The subunits were directly linked through 2,7‐ or 3,6‐ positions of the carbazole. In addition, the carbazole monomers have been N‐substituted by a branched or a linear side‐chain. The chemical structure of the copolymers and their precursors was confirmed by NMR and IR spectroscopies, and their molar masses were estimated by SEC. Thermal analysis under N₂ atmosphere showed no weight loss below 329°C, and no glass transition was observed in between 0 and 250°C. The band gaps of all PCBTs evaluated by optical spectroscopies and by cyclic voltammetry analysis were consistent with expectations and ranged between 2.2 and 2.3 eV. Finally, 2,7 and 3,6 linkages were shown to influence optical properties of PCBTs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2059–2068     

Monitoring of the shrinkage during the photopolymerization of acrylates using hyphenated photorheometry/near‐infrared spectroscopy

This article describes a new method for the quantitative determination and time‐resolved monitoring of the polymerization shrinkage during ultraviolet (UV) photopolymerization. It is based on rheometry using a modified oscillating rheometer. Shrinkage is determined from the decrease of the gap between the rheometer plates. Moreover, near‐infrared (NIR) spectra can be recorded directly in the rheometer, which allows continuous determination of the conversion at any time of a shrinkage measurement. As both shrinkage and conversion data come from the same experiment, shrinkage can be analyzed in dependence on the current conversion achieved during UV irradiation, which enables direct investigation of correlations between both parameters. Hyphenated photorheometry/FT‐NIR spectroscopy was used for the determination of the polymerization shrinkage of pure acrylate monomers and oligomers as well as acrylate‐based formulations. Quantitative shrinkage values were found to be in excellent correlation with data that were determined by an independent method (via buoyancy measurements) and data from literature. Furthermore, the effect of ambient and irradiation conditions or the content of nanoparticles on the degree of shrinkage was studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 729–739     

Rational design of methacrylate monomers containing oxadiazole moieties for single‐layer organic light emitting devices

Methacrylate derived monomers functionalized with pendant oxadiazole moieties were synthesized and copolymerized with carbazole containing monomers to form polymers with electron and hole transporting fragments in the same molecule. Substituents on the oxidazole moiety were varied with the purpose of bandgap tuning and performance optimization when employed in single‐layer organic light emitting devices (OLED). Quantum mechanical calculations of the HOMO‐LUMO levels of the oxidazole derivatives were used to down‐select promising candidates for chemical synthesis and testing in single‐layer OLEDs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1663–1673     

Crosslinking‐induced morphology change of latex nanoparticles: A study of RAFT‐mediated polymerization in aqueous dispersed media using amphiphilic double‐brush copolymers as reactive surfactants

Amphiphilic double‐brush copolymers (DBCs) with each graft site quantitatively carrying both a hydrophilic poly(ethylene oxide) (PEO) graft and a hydrophobic polystyrene (PSt) graft are synthesized by sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization and ring‐opening metathesis polymerization (ROMP). These DBCs are used as both surfactants and polyfunctional RAFT agents in the radical polymerization of St in aqueous dispersed media. Miniemulsions with narrowly dispersed St‐based nanodroplets are readily obtained after ultrasonication of the reaction mixtures. Without the presence of crosslinker, chain‐extension polymerization of St from the DBCs yields well‐defined polymeric latexes with narrow size distributions. However, with the presence of divinylbenzene (DVB) as the crosslinker, vesicular polymeric nanoparticles are formed as the major product. Such crosslinking‐induced change in morphology of the resulting latex nanomaterials may be ascribed to the increase of interfacial curvature in the heterophase systems during crosslinking polymerization. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3250–3259