H2SO4-H2O中硝酸铜对脱硫石膏晶须生长的影响

以处理后的脱硫石膏为原料,在H₂SO₄-H₂O体系中以Cu(NO₃)₂为晶形控制剂采用水热法制备脱硫石膏晶须,探讨了Cu(NO₃)₂对脱硫石膏晶须生长的影响机理。结果表明:Cu(NO₃)₂对脱硫石膏有明显促溶作用,其中Cu²⁺可减小溶液中各离子的活度系数,使溶液中的Ca²⁺浓度增大。NO^-₃通过静电作用在Ca²⁺周围聚集并对SO^2-₄产生屏蔽作用,导致脱硫石膏继续溶解并使Ca²⁺和SO^2-₄的浓度处于相对稳定状态,有利于半水脱硫石膏晶体的形核与生长。此外,Cu²⁺还可在晶须的生长过程中选择性吸附在晶须表面,生成CuSO₄,促进了脱硫石膏的结晶生长,最终在Cu(NO₃)₂用量为2.0%(质量分数)时制备的脱硫石膏晶须长径比约为73。     

Natural Products in Preventing Tumor Drug Resistance and Related Signaling Pathways

Drug resistance is still an obstacle in cancer therapy, leading to the failure of tumor treatment. The emergence of tumor drug resistance has always been a main concern of oncologists. Therefore, overcoming tumor drug resistance and looking for new strategies for tumor treatment is a major focus in the field of tumor research. Natural products serve as effective substances against drug resistance because of their diverse chemical structures and pharmacological effects. We reviewed the signaling pathways involved in the development of tumor drug resistance, including Epidermal growth factor receptor (EGFR), Renin-angiotensin system (Ras), Phosphatidylinositol-3-kinase/protein kinase B (PI3K/Akt), Wnt, Notch, Transforming growth factor-beta (TGF-β), and their specific signaling pathway inhibitors derived from natural products. This can provide new ideas for the prevention of drug resistance in cancer therapy.     

LBO晶体超光滑表面抛光机理

胶体SiO2抛光LBO晶体获得无损伤的超光滑表面,结合前人对抛光机理的认识,探讨了超光滑表面抛光的材料去除机理,分析了化学机械抛光中的原子级材料去除机理.在此基础上,对胶体SiO2抛光LBO晶体表面材料去除机理和超光滑表面的形成进行了详细的描述,研究抛光液的pH值与材料去除率和表面粗糙度的关系.LBO晶体超光滑表面抛光的材料去除机理是抛光液与晶体表面的活泼原子层发生化学反应形成过渡的软质层,软质层在磨料和抛光盘的作用下很容易被无损伤的去除.酸性条件下,随抛光液pH值的减小抛光材料的去除率增大;抛光液pH值为4时,获得最好的表面粗糙度.     

前驱体法制备氮氧化硅纳米线及其光学性能研究

在Ni催化剂的存在下,通过SiCl4的水解氨解反应并在1300℃氨气气氛中进行热氮化处理制得了无定形氮氧化硅纳米线.产物经X射线衍射(XRD)、热重-差示扫描量热(TG-DSC)、扫描电镜(SEM)、透射电镜(TEM)、能量色散谱(EDS)和选区电子衍射(SAED)等表征手段进行分析,结果表明纳米线为无定形结构,直径为100～150nm.在波长为220nm的光激发下,产物的光致发光光谱(PL)在563nm和289nm处分别出现了一个强的绿光发光峰和一个弱的紫光发光峰.对纳米线的生长机理进行分析,表明纳米线的生长遵循气-液-固(VLS)机制控制模式.     

不同形貌氮化硅纳米结构的制备与表征

分别通过VLS和VS生长机制得到了Si3N4纳米线和纳米带.产物经X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)等表征手段进行了分析.FTIR图谱表明它们在800～1100cm-1的波数范围内有一个宽的吸收带,这是Si-N键伸缩振动模式的典型吸收带.它们的室温光致发光图谱显示,在420nm左右都有一很强的发射带,表明其将在纳米光电器件中有潜在应用.另外,Si3N4纳米线发光峰与纳米带的发光相比有少许蓝移(蓝移约4nm),这可能和晶须尺寸的少许差别有关.至于纳米带的发光强度大于纳米线的原因,可能是纳米带的比表面积相对较大,有利于悬键的形成,从而导致材料结构内缺陷的浓度较大.     

CTAB与SDBS对碳酸锶粒子生长形态调控及机理研究

以表面活性剂CTAB和SDBS为化学添加剂,采用化学共沉淀法对碳酸锶晶体的生长形态进行调控,成功地制备出了实心的树枝状和花瓣为空心的花状碳酸锶粉体,并用X射线衍射(XRD)、扫描电子显微镜(SEM)和傅里叶变换红外光谱(FT-IR)等分析手段对样品进行了表征;最后重点对化学添加剂可能产生的影响机理进行了初步的探讨.结果表明,CTAB和SDBS在晶体生长的过程中能起到显著的影响作用,两者对粒子分散性能的作用效果相反,而且后者对晶体(013)和(213)晶面表面能降低的贡献明显大于前者.     

Improved Stretchable and Sensitive Fe Nanowire-Based Strain Sensor by Optimizing Areal Density of Nanowire Network

Flexible strain sensors, when considering high sensitivity and a large strain range, have become a key requirement for current robotic applications. However, it is still a thorny issue to take both factors into consideration at the same time. Here, we report a sandwich-structured strain sensor based on Fe nanowires (Fe NWs) that has a high GF (37–53) while taking into account a large strain range (15–57.5%), low hysteresis (2.45%), stability, and low cost with an areal density of Fe NWs of 4.4 mg/cm². Additionally, the relationship between the contact point of the conductive network, the output resistance, and the areal density of the sensing unit is analyzed. Microscopically, the contact points of the conductive network directly affect the sensor output resistance distribution, thereby affecting the gauge factor (GF) of the sensor. Macroscopically, the areal density and the output resistivity of the strain sensor have the opposite percolation theory, which affects its linearity performance. At the same time, there is a positive correlation between the areal density and the contact point: when the stretching amount is constant, it theoretically shows that the areal density affects the GF. When the areal density reaches this percolation threshold range, the sensing performance is the best. This will lay the foundation for rapid applications in wearable robots.     

金红石TiO_2中本征缺陷扩散性质的第一性原理计算

基于密度泛函理论的爬坡弹性带方法,对金红石相二氧化钛晶体中钛间隙、钛空位、氧间隙、氧空位4种本征缺陷的扩散特征进行了研究.对比4种本征缺陷在晶格内部沿不同扩散路径的过渡态势垒后发现,缺陷扩散过程呈现出明显的各向异性.其中,钛间隙和氧间隙沿[001]方向具有最小的扩散势垒路径,激活能分别为0.505 eV和0.859 eV;氧空位和钛空位的势垒最小的扩散路径分别沿[110]方向和[111]方向,激活能分别为0.735 eV和2.375 eV.     

郡县制国家现代化：中央政府如何扩大公共事务治理职能

郡县制国家的传统职能是“管人”,但是在当代,为了适应现代世界,需要加强和完善“管事”的职能。然而,加强“管事”的职能遇到的一大障碍,是“管事”与“管人”通常难以分开,带来管事与管人的冲突。在全国性公共事务上,面对管事与管人的冲突,郡县制国家的一种改革方向,即建立中央统一管理与地方属地管理相结合的体制,既扩大中央政府的治理职能,同时又发挥纵向约束机制的作用,从而能改善全国性公共事务治理。此种中央统一管理与地方属地管理相结合的体制,通常不是中央政府事先设计出来的,而是在改革过程中,经由中央政府与地方政府的策略性互动过程,逐渐建立起来的。因此,郡县制国家蕴含着一种潜力,即在公共事务治理上,包括地方公共事务和全国性公共事务,可以引入和发挥“纵向约束机制”的作用,使得国家既保持“管人”的基本体制不变,又能提高治理能力。     

Evaluation of a Novel Dechlorination Reaction as an Analytically Useful Derivatization Reaction Part 1. Stoichiometry,Mechanism and Yield Optimization

Abstract

A novel reaction for the dechlorination of polychlorinated biphenyls (PCBs) as well as most other chlorinated aromatic and aliphatic compounds is evaluated and discussed in terms of its potential for analytical purposes. The active dechlorinating agent is prepared through the reaction of molten sodium or potassium with polyethylene glycols (MW >200), in the absence of oxygen, to form the corresponding alkali metal glycolate, a powerful nucleophilic agent. Special emphasis is given to the mechanistic aspects of the reaction and their importance in terms of achieving high and reproducible yields with analytical quantities of substrate, in short periods of time. The contribution of the techniques: ESR, NMR, IR, UV, MS, GC-ECD, LC-EC, CIDNP-NMR, conductimetry and chloride analysis (amperometric) in elucidating the reaction mechanism and providing valuable kinetic data is illustrated. This reaction can potentially be applied to the determination of PCBs in waste oils.