Unexpected Hole Doping of Graphene by Osmium Adatoms

The electronic transport of monolayer graphene devices is studied before and after in situ deposition of a sub-monolayer coating of osmium adatoms. Unexpectedly, and unlike all other metallic adatoms studied to date, osmium adatoms shift the charge neutrality point to more positive gate voltages. This indicates that osmium adatoms act as electron acceptors and thus leave the graphene hole-doped. Analysis of transport data suggest that Os adatoms behave as charged impurity scatterers, albeit with a surprisingly low charge-doping efficiency. The charge neutrality point of graphene is found to vary non-monotonically with gate voltage as the sample is warmed to room temperature, suggesting that osmium diffuses on the surface but is not completely removed.     

The effect of heat treatment on the electrochemical corrosion behavior of reactive plasma-sprayed TiN coatings

The effect of heat treatment on the corrosion behavior of reactive plasma sprayed TiN coatings in simulated seawater was investigated by electrochemical methods such as the corrosion potential-time curve (E_corr − t), potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and SEM, etc. The results showed that the corrosion potential of TiN coatings increased after heat treatment; the corrosion current of the TiN coatings after heat treatment (be hereafter referred to as HT-TiN) was 13.3% of the untreated coatings (be hereafter referred to as UT-TiN), and the polarization resistance of HT-TiN was 20 times of UT-TiN, which indicated that the heat treatment had significantly increased the corrosion resistance of the coatings. The corrosion behavior of the coatings was mainly local corrosion, and the local corrosion behavior mainly took place at the microdefects (crack and pores) of the coatings. The porosity of the coatings was reduced after heat treatment. The reason was that TiN reacted with O₂ to form TiO₂ and Ti₃O during the heat treating, and volume expansion took place, which led to denser microstructure. The corrosion resistance of the coatings was therefore increased.     

Corrosive behavior of chromium carbide-based films formed on steel using a filtered cathodic vacuum arc system

The formation of chromium carbide-based hard-coatings on steels using a 90°-bend filtered cathodic vacuum arc (FCVA) has extensive industrial applications; such coatings are free of macroparticles and exhibit excellent characteristics. In this investigation, a working pressure of C₂H₂/Ar was adopted to synthesize amorphous chromium carbide film (a-C:Cr) and crystalline chromium carbide film (cryst-Cr₃C₂) from a Cr target (99.95%) at 500 °C under a substrate voltage of −50 V. The corrosion behavior of a-C:Cr coated on steel (a-C:Cr/steel) and cryst-Cr₃C₂ coated on steel (cryst-Cr₃C₂/steel) were compared in terms of open-circuit potentials (OCP) and polarization resistance (R_p) in an aerated 3.5 wt% NaCl aqueous solution, as determined by electrochemical impedance spectroscopy (EIS). The XRD results indicated that the transformation of a-C:Cr to cryst-Cr₃C₂ is distinct as the working pressure declines from 1.2 × 10⁻² to 2.9 × 10⁻³ Torr. The OCP of a-C:Cr/steel and cryst-Cr₃C₂/steel resemble each other and both assembly are nobler than uncoated steel. The R_p of the coatings exceeds that of the uncoated steel. The SEM observation and the EIS results demonstrate that the cryst-Cr₃C₂/steel more effectively isolates the defects than dose a-C:Cr/steel.     

赣南新塘萤石矿区地下水元素钙氟变化及其成矿意义

对新塘脉状矿床及其附近地下水的钙、氟元素进行了系统检测,发现钙、氟含量存在明显的空间分布差异。采矿矿床及其附近地下水的钙、氟含量偏高,而2km远的地下水钙、氟含量低且接近流域平均值,两处平均含量相差近10倍。钙、氟的相关性分析显示,水体中钙、氟含量具有很好的相关性,揭示该区萤石矿成矿受沉积物钙氟控制,并与地下水运动密切相关,通过热液循环不断淋滤溶蚀围岩获取钙氟形成萤石矿。由此,矿区的钙氟异常变化可以作为找矿的重要指标。     

锂离子电池正极材料Fe3+掺杂Li1+xV3O8的制备与电化学性能

采用柠檬酸辅助的溶胶-凝胶法制备了Fe^3＋掺杂Li1.1Fe0.05V2．95O8及对比样品LiV3O8正极材料．使用TG—DTA、XRD、FT-IR等手段表征了正极材料的物理化学特性,并采用EIS、恒电流充放电等手段研究了其电化学性能．结果表明：Fe^3＋掺杂LiV3O8与对比LiV3O8相比,能在更低的温度下晶化,能在相同温度、相同时间煅烧下保持更小的晶粒度．Li1.1Fe0.05V2．95O8与对比LiV308相比,特别是大电流下的放电容量有较大的提高,在75mA·g^-1,197mA·g^-1,373mA·g^-1及重新回到75mA·g^-1电流下的初始放电容量分别是307mAh·g^-1,237mAh·g^-1．162mAh·g^-1和302mAh·g^-1．在回复到75mA·g^-1电流后放电容量能非常稳定保持在278．6mAh·g^-1左右,并同时给出了初步的理论解释．     

The electrochemical reactivity of the NiP<Subscript>3</Subscript> skutterudite-type phase with lithium

We report the electrochemical Li reactivity of the cubic NiP₃ phase, a candidate for anode applications for Li-ion batteries. NiP₃ reacts with nine lithium per formula unit leading to a first cycle reversible capacity of 1,475 mAh/g at an average potential of 0.9 V vs. Li+/Li°. Electrochemical measurements and complementary X-ray diffraction showed that NiP₃ presents a conversion process competing with an insertion process. A good cycleability may only be obtained on a limited potential window, excluding the low-potential region. This paper was presented at the 11th EuroConference on the Science and Technology of Ionics, Batz-sur-Mer, Sept. 9–15, 2007.     

Nitrogen doping in pulsed laser deposited ZnO thin films using dense plasma focus

Pulsed laser deposition synthesized ZnO thin films, grown at 400 °C substrate temperature in different oxygen gas pressures, were irradiated with 6 shots of pulsed nitrogen ions obtained from 2.94 kJ dense plasma focus to achieve the nitrogen doping in ZnO. Structural, compositional and optical properties of as-deposited and nitrogen ion irradiated ZnO thin films were investigated to confirm the successful doping of nitrogen in irradiated samples. Spectral changes have been seen in the nitrogen irradiated ZnO thin film samples from the low temperature PL measurements. Free electron to acceptor emissions can be observed from the irradiated samples, which hints towards the successful nitrogen doping in films. Compositional analysis by X-ray photoelectron spectroscopy and corresponding shifts in binding energy core peaks of oxygen and nitrogen confirmed the successful use of plasma focus device as a novel source for nitrogen ion doping in ZnO thin films.     

Charge-response of magnetization in nanoporous Pd-Ni alloys

This work reports isothermal reversible variation of magnetization in nanoporous Pd-Ni alloys subjected to continuous charging and discharging of the sample in aprotic electrolyte medium. Polarizing metal surface with excess charge also finds strain in the nanoporous structure using the sample as working electrode. Therefore, it is proposed that pressure induced by strain is the key parameter for the observed reversible magnetization in the transition metal alloys.     

Intersubband transitions in InxAl（l-x）N/InyGa（l-y）N quantum well operating at 1.55 μm

In this paper, we theoretically study the effects of doping concentration ND and an external electric field on the intersubband transitions in InxAl（l-x）N/InyGa（l-y）N single quantum well by solving the Schrodinger and Poisson equations self-consistently. Obtained results including transition energies, the band structure, and the optical absorption have been discussed. The lowest three intersubband transitions （E2 -El）, （E3 -El）, and （E3 -E2） are calculated as functions of doping concentration ND. By increasing the doping concentration ND, the depletion effect can be reduced, and the ionized electrons will compensate the internal electric field which results from the spontaneous polarization. Our results show that an optimum concentration ND exists for which the transition 0.8 eV （1.55 μm） is carried out. Finally, the dependence of the optical absorption α13（ω） on the external electric field and doping concentration is studied. The maximum of the optical absorption can be red-shifted or blue-shifted through varying the doping concentration and the external electric field. The obtained results can be used for designing optical fiber telecommunications operating at 1.55 μm.     

One-step synthesis of Fe3O4@C/reduced-graphite oxide nanocomposites for high-performance lithium ion batteries

In this paper, we propose a facile one-step strategy to prepare Fe₃O₄@amorphous carbon/reduced graphite oxide nanocomposites (FCRGs) under hydrothermal conditions. A transmission electron microscopy image has shown that the as-formed Fe₃O₄ nanoparticles coated with a layer of amorphous carbon are wrapped by reduced graphite oxide (r-GO) sheets. The diameter of Fe₃O₄ nanoparticles is less than 50 nm. N₂ adsorption/desorption isotherms indicate that the specific surface area of FCRG is 31.6 m²/g with porous structure. FCRG exhibits improved cycling stability and rate performances as a potential anode material for high-performance lithium ion batteries.