Reflection of plane waves in generalized thermoelasticity of type III with nonlocal effect

The generalized thermoelasticity theory based upon the Green and Naghdi model III of thermoelasticity as well as the Eringen's nonlocal elasticity model is used to study the propagation of harmonic plane waves in a nonlocal thermoelastic medium. We found two sets of coupled longitudinal waves, which are dispersive in nature and experience attenuation. In addition to the coupled waves, there also exists one independent vertically shear-type wave, which is dispersive but experiences no attenuation. All these waves are found to be influenced by the elastic nonlocality parameter. Furthermore, the shear-type wave is found to face a critical frequency, while the coupled longitudinal waves may face critical frequencies conditionally. The problem of reflection of the thermoelastic waves at the stress-free insulated and isothermal boundary of a homogeneous, isotropic nonlocal thermoelastic half-space has also been investigated. The formulae for various reflection coefficients and their respective energy ratios are determined in various cases. For a particular material, the effects of the angular frequency and the elastic nonlocal parameter have been shown on phase speeds and the attenuation coefficients of the propagating waves. The effect of the elastic nonlocality on the reflection coefficients and the energy ratios has been observed and depicted graphically. Finally, analysis of the various results has been interpreted.     

Enhanced electronic and nonlinear optical responses of C24N24 cavernous nitride fullerene by decoration with first row transition metals; A computational investigation

The electronic (energy gap and work function) as well as electrical properties (dipole moment, polarizability, and first hyperpolarizabilities) of the first-row transition metals decorated C₂₄N₂₄ cavernous nitride fullerene were explored using DFT calculations. The transition metals are decorated at N4 cavity of C₂₄N₂₄ fullerene. According to our spin polarized computations, the most stable spin state monotonically increases to sextet for Mn@C₂₄N₂₄ and thereafter dropped off gradually to singlet state for Zn@C₂₄N₂₄ system. The findings demonstrate that transition metals can remarkably decrease the HOMO-LUMO energy gap and work function values up to 63% and 21% of bare C₂₄N₂₄, respectively. As can be seen, when the Sc and Ti metals are located above the N4 cavity of fullerene, systems of enhanced static hyperpolarizabilities (β₀) are delivered. These findings might provide an effective strategy to design high performance eletcro-optical materials based on carbon- nitride fullerene.     

基于复杂网络的能源互联网信息物理融合系统跨空间风险传递研究

能源互联网呈现物理信息深度融合的趋势,为电力系统管理研究定义了新的研究框架。作为一个先进的复杂系统,能源互联网信息物理系统(Energy Internet Cyber-Physical System,ECPS)在其发展过程中面临着一些新的挑战,其中一个就是耦合结构下的风险管理。本文结合复杂网络理论和风险传递理论,着重在拓扑层面分析了ECPS跨空间交互机理,并在此基础上定义了交互路径和交互系数;接着建立了ECPS跨空间风险传递模型,量化描述了风险的传递和演化过程,并进行了风险影响评估;最后,通过仿真实验分析了三种不同交互系数节点故障的风险传递过程和不同攻击模式下系统的崩溃过程。对仿真结果的讨论阐述了能源互联网风险跨空间传递的特点,为更深入地研究ECPS的风险管理提供了参考。     

Molybdenum Disulfide Based Nanomaterials for Rechargeable Batteries

The rapid development of electrochemical energy storage systems requires new electrode materials with high performance. As a two-dimensional material, molybdenum disulfide (MoS₂) has attracted increasing interest in energy storage applications due to its layered structure, tunable physical and chemical properties, and high capacity. In this review, the atomic structures and properties of different phases of MoS₂ are first introduced. Then, typical synthetic methods for MoS₂ and MoS₂-based composites are presented. Furthermore, the recent progress in the design of diverse MoS₂-based micro/nanostructures for rechargeable batteries, including lithium-ion, lithium-sulfur, sodium-ion, potassium-ion, and multivalent-ion batteries, is overviewed. Additionally, the roles of advanced in situ/operando techniques and theoretical calculations in elucidating fundamental insights into the structural and electrochemical processes taking place in these materials during battery operation are illustrated. Finally, a perspective is given on how the properties of MoS₂-based electrode materials are further improved and how they can find widespread application in the next-generation electrochemical energy-storage systems.     

Electrochemical Monitoring of Methotrexate Anticancer Drug in Human Blood Serum by Using in situ Solvothermal Synthesized Fe3O4/ITO Electrode

Here, we reported on a one‐step fabrication of magnetite Fe₃O₄ nanoparticles/indium tin oxide (ITO) electrode based on the direct growing of Fe₃O₄ nanoparticles on the ITO surface by using a solvothermal process. The modified electrode was used as electrochemical methotrexate (MTX) biosensor with high sensitivity based on cyclic voltammetry and square wave voltammetry techniques. The results demonstrated a linear relationship between the MTX concentration and its oxidation current peak over a wide range from 10^?5 to 10^?14 mole/L with a limit of detection of 0.4×10^?15 M based on the square wave voltammetry (SWV) technique. In addition, Fe₃O₄/ITO electrode showed a good capability for measuring very low concentrations of MTX drug dissolved in human serum solution. Also, Fe₃O₄/ITO electrode was used for detecting MTX in blood serum samples collected from patients after their treatment with MTX. The prepared electrode showed the higher sensitivity that higher than the Viva‐E instrument, which opens the door for developing a cheap, simple and higher sensitive MTX sensor.     

On stochastic auctions in risk-averse electricity markets with uncertain supply

This paper studies risk in a stochastic auction which facilitates the integration of renewable generation in electricity markets. We model market participants who are risk averse and reflect their risk aversion through coherent risk measures. We uncover a closed form characterization of a risk-averse generator’s optimal pre-commitment behaviour for a given real-time policy, both with and without risk trading.     

Comparison of Penta and Tetra-pyridyl Cobalt-based Catalysts for Water Reduction: H2 Production Cycle,Solvent Response and Reduction Free Energy

Understanding water reduction towards H₂ generation is crucial to overcome today's renewable energy obstacles. Previous studies have shown the superior H₂ production performances of Cobalt based penta-pyridyl (CoaPPy) and tetra-pyridyl (CoaTPy) complexes in solution. We investigate H₂ production cycles of CoaPPy and CoaTPy complexes immersed in water solution by means of Ab-initio Molecular Dynamics and Density Functional Theory. We monitor dynamic properties of the systems, solvent response and structural changes occurring in the catalysts, by simulating all intermediate steps of the H₂ production cycle. Reduction free energies and reorganization energies are calculated. Our results show that, following the first electron injection, H₂ production proceeds with the singlet spin state. Following the first electron insertion, we observe a significant rearrangement of the hydrogen bonding network in the first solvation shell. The cobalt center turns out to be more accessible for the surrounding water molecules in the case of CoaTPy at all the intermediate steps, which explains its higher catalytic performance over CoaPPy. Following the first reduction reaction, a larger gain in reduction free energy is estimated for CoaTPy with respect to CoaPPy, with a difference of 0.14 eV, in line with the experiments. For the second reduction, instead, CoaPPy shows more negative reduction potential, by 0.41 eV.     

Catalytic activity of Pt and Pd in gaseous reactions of H2 and CH4 oxidation at low pressures

1. Download : Download high-res image (85KB)
2. Download : Download full-size image

     

Structural characterization and hydrogen sorption properties of the Mg50Ni45Cr5 alloy

The Mg₅₀Ni₄₅Cr₅ alloy for hydrogen storage is prepared by mechanical alloying. First, using the X-ray diffraction (XRD) and the scanning electron microscopy (SEM) we examine the morphology and the structure of the substrate. The obtained results highlight the effectiveness of this alloy in loading hydrogen as it is a nanocrystalline and a ductile one. Second, we attempt to justify these expectations using the statistical physic, precisely the model monolayer with two levels of energy, in modeling a hydrogen absorption and desorption isotherms on Mg₅₀Ni₄₅Cr₅ alloy at four temperatures T?=?275?K, T?=?300?K, T?=?325?K and T?=?350?K. The model has six physicochemical parameters deduced from the fitting of the isotherms, they are divided by two categories of steric and energetic parameters. Thanks to these parameters we compare the absorption and desorption processes, in order to highlight the hysteresis phenomenon encountered during the hydrogen sorption.