Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

三片式液晶投影仪的立体视觉研究

基于对三原色信号进行偏振特性的分析,提出了一种在三片式液晶投影显示设备上实现立体显示的新方法。该方法利用红色和蓝色信号光与绿色信号光在偏振方向上正交的特性,在信号通道之间引入视差,实现了三维立体显示。因此这种方法被称为补色偏振体视。介绍了该方法的基本原理,并详细叙述了用PHOTOSHOP软件制作补色偏振立体图对的方法。     

Monte Carlo Simulation of Electron Transport and X-Ray Generation. II. Radiative Processes and Examples in Electron Probe Microanalysis

Theoretical models for Monte Carlo simulation of radiative processes, i.e. bremsstrahlung and characteristic x-ray emission, are presented. Possible strategies for simulating electron transport are briefly described. For mechanisms involving energy loss and angular deflections, difficulties for strict implementation of accurate numerical differential cross sections still remain due to the strong correlations between these variables. Practical solutions for the case of inelastic collisions and bremsstrahlung emission are described. Comparisons of simulation results with experimental data for several problems of interest in electron probe microanalysis are presented.     

Software Cold Test Simulation of Coupled Cavity Slow-Wave Structure in Millimeter Wave TWT

In this paper, the software cold-test simulation method to obtain RF dispersion, interaction impedance by MAFIA software is discussed considering effect of the conducting barrel in the millimeter-wave TWT. The dispersion simulation result is obtained more consistent with experiment data than the method that ignoring effect of the conducting barrel. By changing the structure parameter, high frequency characteristic will be affected. The change relationship of high frequency characteristic with structure parameter is obtained. The different calculation methods of the interaction impedance are discussed. These results are received and are consistent with experiment data.     

Simulation of polarization effects in AlGaN/GaN heterojunction

Because of their large band-gap, large high-field electron velocity, large breakdownfield, and large thermal conductivity, GaN and its heterojunction with AlGaN and InGaNhave foreseeable potential in the applications of high-power/temperature electronics, andoptoelectronic devices operative in UV and visible wavelength. Polarization inducedelectric field can reach the magnitude of ~MV/cm[1,2]. For AlGaN/GaN based FETs theconcentration of sheet carrier induced by polarization in the cha…     

Magnetotransport and magnetic properties of InAs/Mn digital alloys

We have investigated the magnetic and magneto-transport properties of a systematic sequence of five InAs/Mn digital alloys grown by a combination of molecular beam epitaxy and atomic layer epitaxy. The samples consist of 30 periods of Mn fractional monolayers (ML) (0.17–0.5 ML) separated by 14 ML thick InAs spacer layers in a superlattice configuration. Four samples show n-type electrical conduction while the fifth (0.25 ML Mn) is p-type. Squid magnetization measurements performed on these samples show remnant magnetization above room temperature, which is apparently related to a second phase.     

微扰影响下组合孤波的传输稳定性研究

针对最近发现的高阶非线性薛定锷方程的组合孤波解，我们数值研究了它在受到包括幅度偏离、参数条件偏离以及随机噪声等不同初始扰动后的传输特性。结果表明一定的精确脉冲在不同的扰动下有类似的稳定趋势。     

Quantitative assessment of solid oxide electrochemical doping

Quantitative analysis of metal cation doping by solid oxide electrochemical doping (SOED) has been performed under galvanostatic doping conditions. A M–β″-Al₂O₃ (M=Ag, Na) microelectrode (contact radius: about 10 μm) was used as cation source to attain a homogeneous solid–solid contact between the β″-Al₂O₃ and doping target. In Ag doping into alkali borate glass, the measured dopant amount closely matched the theoretical value. High Faraday efficiencies of above 90% were obtained. This suggests that the dopant amount can be precisely controlled on a micromole scale by the electric charge during electrolysis. On the other hand, current efficiencies of Na doping into Bi₂Sr₂CaCu₂O_y (BSCCO) ceramics depended on the applied constant current. Efficiencies of above 80% were achieved at a constant current of 10 μA (1.6 A cm⁻²). The relatively low efficiencies were explained by the saturation of BSCCO grain boundaries with Na. By contrast, excess Na was detected on the anodic surface of ceramics at a constant current of 100 μA (16 A cm⁻²). In the present study, we demonstrate that SOED enables micromole-scale control over dopant amount.     

Angular response characteristic of pyramid shape fast neutron dosimeter using CR-39 films

CR-39 is a highly sensitive etched track detector for neutron monitoring and dosimetry applications but its dose equivalent response is strongly direction dependent with respect to the incident neutrons. This is considered to be a major drawback for their use. In the present study, an attempt has been made to develop a pyramid shaped dosimeter, which consists of polyethylene material of thickness 1 mm with the provision to hold three CR-39 films at an angle of 35° to each other. The response of CR-39 in this configuration under optimum electrochemical etching at elevated temperature have been found nearly angular independent and therefore the dosimeter can be used for neutron monitoring, i.e. personnel as well as area monitoring.     

Predicting the Mechanical Properties of Binary Blends of Immiscible Polymers

We couple a morphological study of an immiscible binary AB mixture with a micromechanical simulation to determine how the spatial distribution of the A and B domains and the interfacial region (interphase) affects the mechanical behavior of the blend. The morphological studies are conducted through a three-dimensional Cahn-Hilliard (CH) simulation. Through the CH calculations, we obtain the size and structure of the domains for different blend compositions. The output of the CH model serves as the input to the Lattice Spring Model (LSM), which consists of a three-dimensional network of springs. In particular, the location of the different phases is mapped onto the LSM lattice and the appropriate force constants are assigned to the LSM sites. A stress is applied to the LSM lattice and we calculate the elastic response of the material. We find that the local stress and strain fields are highly dependent on the morphology of the system. By integrating the morphological and mechanical models, we can isolate how modifications in the composition of the mixture affect the macroscopic behavior. Thus, we can establish how choices made in the components affect the ultimate performance of the material.