Electroreductive polymerization of trans-[RuCl 2(vpy) 4] on Nd-Fe-B magnets: electrochemical impedance spectroscopy interpretation, Raman spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy analysis

The electropolymerization of trans-[RuCl₂(vpy)₄] (vpy=4-vinylpyridine) monomer on Nd-Fe-B magnets was studied by electrochemical impedance spectroscopy (EIS). Impedance diagrams obtained during the polymerization process were used to monitor film formation. The EIS results gave insight into the electrochemical phenomena occurring at the magnet surface as the polymerization process progressed. The film structure and morphology were also studied by X-ray photoelectron spectroscopy, scanning electron microscopy and Raman spectroscopy. The Raman spectroscopy results showed that the polymerization takes place at the vinyl groups of the monomer and also that the redox polymer structure is very similar to that of the monomer. The ratio of the intensity of the XPS peaks for fluorine (from the electrolyte PF₆ ^–) and ruthenium present in the film showed that the polymer on Nd-Fe-B contained an equal proportion of Ru²⁺ and Ru³⁺, indicating that part of the film is positively charged, i.e. {[RuCl₂(vpy)₄]⁺} _n .     

An in situ STM study on the long-range surface restructuring of Au(1 1 1) in a non-chloroaluminumated ionic liquid

We report an in situ STM study of a potential-dependent long-range surface restructuring of Au(1 1 1) electrode in neat 1-butyl-3-methylimidazolium tetrafluoroborates (BMIBF₄) ionic liquid. Au(1 1 1) undergoes a significant long-range surface restructuring upon cathodic excursion to −1.0 V vs. Pt quasi-reference. The restructuring involves the formation of tiny pits, which then develops into a stable worm-like network with an average width of the network grids 2 nm. Electrochemical annealing occurs at the cathodic limit with the presence of a reduction product of cation BMI⁺. A smooth surface is recovered with the appearance of the typical (√3 × 22) reconstruction of Au(1 1 1). The surface restructuring is reestablished upon anodic excursion to −1.3 V after the adsorbed reduction product is oxidized. The long-range surface restructuring phenomenon is tentatively explained as a result of partial charge transfer to the weakly adsorbed BMI⁺, which reduces the metal–metal cohesive energy. In addition, the synergetic effect of the counter anion BF₄⁻ may also be involved. The results provide a knowledge of Au(1 1 1) electrode behavior in the neat ionic liquid and are beneficial to understanding in situ STM results involving surface morphological changes in such a media.     

Electrochemical grafting by reduction of 4-aminoethylbenzenediazonium salt: Application to the immobilization of (bio)molecules

We propose in this study a simple and rapid way to produce stable amino-derivatized conductive surfaces for the subsequent immobilization of (bio)molecules. This was achieved through the use of (4-aminoethyl)benzenediazonium salt (AEBD), which was immobilized on glassy carbon and gold electrodes by its electrochemical reduction. The presence of terminal grafted amino functions was evidenced with XPS by analyzing N1s core level. Besides this conventional surface characterisation, an electrochemical strategy is proposed here to evidence the presence of immobilized amines, in which the chemical reactivity of amines towards 2,4,6-trinitrobenzenesulfonic acid (TNBS) is used. Surface-bound TNBS served as an electrochemical marker and was detected by cyclic voltammetry. Additionally, pre-modified gold electrodes with amino functions can be derivatized with biomolecules such as glutathione (GSH). Glutathione attachment was evidenced by studying the electrochemical behaviour of ferri/ferrocyanide redox before and after its immobilization. The functionalized electrodes were then used for the detection of copper ions in neutral aqueous solutions.     

Electrochemical synthesis, characterization and some properties of a polymer derived from thioflavin S

Polymeric films derived from thioflavin S were electrosynthesized on mild steel and silver electrodes in sulfuric acid and lithium perchlorate-containing aqueous solutions. The introduction of thioflavin S in an acidic solution protected the surface of steel from corrosion. The electrochemical behavior of the steel coated with a layer of poly(thioflavin) was examined by electrochemical impedance spectroscopy. The films exhibited a capacitive behavior and were semi-conductive in nature. Infra red reflectance measurements of the polymer films at the steel surface showed that the polymer structure retained the aromatic structure of the benzene and thiazole rings with the distinction of a nitrogen quinone vibrational band. Surface morphology of the polymer film was examined with scanning electron microscopy. The films are yellow, compact and dense when electrochemically formed onto steel surfaces when compared to a blue rather porous when formed onto silver electrode. The mechanism of electropolymerization of thioflavin is given and found similar to that of aniline with the possibility of metal chelation with the sulfur and/or nitrogen in the thiazole ring.     

用CR传输线模型研究涂层/金属体系阻抗谱

根据CR传输线模型和QR电路之间的关系,建立了拟合其初值的计算方法,借助Z-View软件,可求得各元件精确值.根据电容（Ci）和电阻（Ri）随特征频率（f*）的分布,推导了元件相对增量与恒相位角元件（Q）指数参数n的关系. 结果表明, 当n小于0.5时,Ci比Ri增加得更快,从新的角度说明了n的物理意义及其和界面脱层之间的关系.作为应用实例,拟合了不同特征的电化学阻抗谱,分析了有机涂层/金属腐蚀体系阻抗变化的具体过程,区分了点蚀和脱层因素对阻抗谱的影响,从高阻抗体系同时得到了与不同空隙率有关的涂层电容和电阻值,并根据涂层体系的不均匀特征探讨了模型结构的物理意义.     

Preparation and characterization of molecularly imprinted electropolymerized carbon electrodes

Molecularly imprinted polymers (MIPs) selective for fluorescein, rhodamine or 2,4-dichlorophenoxyacetic acid (2,4-D) were electropolymerized onto graphite electrodes using an aqueous solution equimolar in resorsinol/ortho-phenylenediamine and in the presence of the template molecule. For the dyes, the MIP-coated electrodes showed higher affinity for their template molecule than for a non-template dye. The 2,4-D-MIP-coated electrode showed a concentration dependent response for 2,4-D as compared to the polymer-coated electrode prepared in the absence of template molecule.     

Determination and Differentiation of Two Seemingly Identical Medicinal Herbs by Capillary Electrophoresis with Electrochemical Detection

A high-performance capillary electrophoresis with electrochemical detection (CE-ED) method has been employed for the determination of six bioactive ingredients in traditional Chinese herbs, Herba cepbalanoplosis segeti and Herba cirsii japonici. The effects of several factors such as the acidity and concentration of running buffer, the separation voltage, the applied potential and the injection time on CE-ED were investigated. Under the optimum conditions, the six analytes could be well separated within 21 min in a 75 cm length capillary at the separation voltage of 15 kV in a 50 mmol L^–1 borax running buffer (pH 8.4). A 300 m diameter carbon disk electrode was used as the working electrode positioned carefully opposite the outlet of the capillary in a wall-jet configuration at potential of +950 mV (vs. SCE). Good linear relationship was established between peak current and concentration of analytes over two orders of magnitude with detection limits (S/N=3) ranged from 1.5×10^–7 to 6.0×10^–7 g mL^–1 for all six analytes. This proposed method has been successfully applied for the analysis of traditional Chinese herbs after a relatively simple extraction procedure, further on, for the differentiation of these above two seemingly identical herbs based on their electropherograms or characteristic electrochemical profiles.     

A facile electrochemical synthesis of caffeic acid derivatives in the presence of acetylacetone or methyl acetoacetate in aqueous medium

The anodic oxidation of caffeic acid in the presence of acetylacetone or methyl acetoacetate in aqueous solution has been studied by cyclic voltammetry and controlled-potential electrolysis techniques. The result showed that caffeic acid was oxidized to the corresponding o-benzoquinone, which underwent further Michael-addition with acetylacetone or methyl acetoacetate to produce caffeic acid derivative 3,4-dihydroxy-6-(1-acetylacetone)-yl cinnamic acid 4a or 3,4-dihydroxy-6-(1-acetyl-methylacetate)-yl cinnamic acid 4b.     

Polypyrrole-Fe2O3 nanohybrid materials for electrochemical storage

We report on the synthesis and electrochemical characterization of nanohybrid polypyrrole (PPy) (PPy/Fe₂O₃) materials for electrochemical storage applications. We have shown that the incorporation of nanoparticles inside the PPy notably increases the charge storage capability in comparison to the “pure” conducting polymer. Incorporation of large anions, i.e., paratoluenesulfonate, allows a further improvement in the capacity. These charge storage modifications have been attributed to the morphology of the composite in which the particle sizes and the specific surface area are modified with the incorporation of nanoparticles. High capacity and stability have been obtained in PC/NEt₄BF₄ (at 20 mV/s), i.e., 47 mAh/g, with only a 3% charge loss after one thousand cyles. The kinetics of charge–discharge is also improved by the hybrid nanocomposite morphology modifications, which increase the rate of insertion–expulsion of counter anions in the bulk of the film. A room temperature ionic liquid such as imidazolium trifluoromethanesulfonimide seems to be a promising electrolyte because it further increases the capacity up to 53 mAh/g with a high stability during charge–discharge processes.     

Electro-catazone treatment of an ozone-resistant drug: Effect of sintering temperature on TiO2 nanoflower catalyst on porous Ti gas diffuser anodes

Electrochemical heterogeneous catalytic ozonation (E-catazone) is a promising and advanced oxidation technology that uses a titanium dioxide nanoflower (TiO_2-NF)-coated porous Ti gas diffuser as an anode material. Our previous study has highlighted that the importance of the TiO_2-NF coating layer in enhancing OH production and rapidly degrading O₃-resistant drugs. It is well known that the properties of TiO_2-NF are closely related to its sintering temperature. However, to date, related research has not been conducted in E-catazone systems. Thus, this study evaluated the effect of the sintering temperature on the degradation of the O₃-resistant drug para-chlorobenzoic acid (p-CBA) using both experimental and kinetic modeling and revealed its influence mechanism. The results indicated that the TiO_2-NF sintering temperature could influence p-CBA degradation and OH production. TiO_2-NF prepared at 450 °C showcased the highest p-CBA removal efficiency (98.5% in 5 min) at a rate of 0.82 min⁻¹, and an OH exposure of 8.41 × 10⁻¹⁰ mol L⁻¹ s. Kinetic modeling results and interface characterization data revealed that the sintering temperature could alter the TiO₂ crystallized phase and the content of surface-adsorbed oxygen, thus affecting the two key limiting reactions in the E-catazone process. That is, ≡TiO₂ surface reacted with H₂O to form TiO₂-(OH)₂, which then heterogeneously catalyzed O₃ to form OH. Consequently, E-catazone with a TiO_2-NF anode prepared at 450 °C generated the highest surface reaction rate (5.00 × 10⁻¹ s⁻¹ and 4.00 × 10^-3 L mol^-1 s⁻¹, respectively), owing to its higher anatase content and adsorbed oxygen. Thus, a rapid O₃-TiO₂ reaction was achieved, resulting in an enhanced OH formation and a highly effective p-CBA degradation. Overall, this study provides novel baseline data to improve the application of E-catazone technology.