Sonochemical synthesis of graphitic carbon nitrides‐wrapped bimetal oxide nanoparticles hybrid materials and their electrocatalytic activity for xanthine electro-oxidation

A novel network-like magnetic nanoparticle was fabricated on a graphitic carbon nitride through a facile sonochemical route at frequency 20 kHz and power 70 W. To enhance the electrocatalytic activity of the modified materials, the graphitic carbon nitrides (g-C₃N₄) was prepared from melamine. Monitoring of xanthine concentration level in biological fluids is more important for clinical diagnosis and medical applications. As modified CuFe₂O₄/g-C₃N₄ nanocomposite exhibits better electrochemical activity towards the oxidation of xanthine with higher anodic current compared to other modified and unmodified electrode for the detection of xanthine with larger linear range (0.03–695 µM) and lower limit of detection (13.2 nM). To compare with these methods, the electrochemical techniques may be an alternative high sensitive method due to their simplicity and rapid detection time. In addition, the practical feasibility of the sensor was inspected with biological samples, reveals the acceptable recovery of the sensor in real samples.     

Insights into the electro-oxidation of hydrazine at single-walled carbon-nanotube-modified edge-plane pyrolytic graphite electrodes electro-decorated with metal and metal oxide films

Electrochemistry of edge-plane pyrolytic graphite electrodes (EPPGEs) modified with Aldrich single-walled carbon nanotubes (SWCNTs) electro-decorated with metal (Ni, Fe and Co) and their oxides have been studied. The morphology and identity of the metallic dispersions were examined by scanning electron microscopy and energy-dispersive spectroscopy. We show that SWCNTs serve as efficient conducting carbon material for electronic communication between metal films and the underlying carbon electrode. By using cyclic voltammetry and electrochemical impedance spectroscopy (EIS) techniques, it is proved that both EPPGE-SWCNT-Ni and EPPGE-SWCNT-Fe exhibit comparable electrochemical response in buffered aqueous solution (pH 7.0) and towards electro-oxidation of hydrazine in Na₂SO₄ solution. The impedance spectra of these SWCNT-metal hybrids were complicated and follow electrical equivalent circuit model typical of adsorption-controlled charge transfer kinetics. Hydrazine impedance spectra exhibited inductive loop, characteristic of Faradaic current being governed by the occupation of an intermediate state. On the other hand, the EIS data obtained in a simple redox probe, [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻, showed that EPPGE-SWCNT and EPPGE-SWCNT-Ni followed electrical equivalent circuit models typical of partial charge transfer or adsorption-controlled kinetics with some resemblance to the behaviour of electrolyte–insulator–semiconductor sensors.     

Use of low current densities in electrolyses with conductive-diamond electrochemical — Oxidation to disinfect treated wastewaters for reuse

In the search for new disinfection technologies for reused water, in this work the effect of current density on the disinfection capability, during the electrolyses with conductive diamond anodes of the effluent of a municipal wastewater treatment plant was evaluated. It was found that this electrolytic technology can disinfect completely for current densities ranging from 1.3 to 130 A m^{− 2}, but the disinfection rate and chlorine speciation are significantly affected by particular current density applied. In order to avoid the occurrence of non desired species, the lower value of this range is proposed. In those conditions, complete disinfection can be obtained and hypochlorite and chloramines are the main species, not being produced chlorate, perchlorate or organo-chlorinates species.     

EQCM analysis of Bi oxidation mechanism on a Pt electrode

The electro-oxidation behaviours of bismuth (Bi) species adsorbed on a platinum (Pt) anode were investigated using an in situ electrochemical quartz crystal microbalance analysis in the measurement of cyclic voltammetry (CV) and electrochemical impedance spectroscopy under potentiostatic mode. In the CV of Bi modified Pt, there were four distinct features in the current–potential curves during an anodic scan: (i) the adsorption of water molecules in acidic media, (ii) the formation of Bi oxide, (iii) ionization of Bi oxide and (iv) partial desorption of Bi species. During a cathodic scan, the Bi modified Pt surface recovered to its original state via the reduction of Bi oxide and re-deposition of Bi ion. Surface mass data with electrical charge change and impedance measurements of Bi modified Pt supported the electrocatalytic oxidation of bismuth species as the responsible mechanism.     

Electrosynthesis of structured derivated polythiophenes: Application to electrodeposition of latex particles on these substrates

Synthesis of super-structured polymers is a great challenge because these entities could present a large choice of applications. Synthesis and electropolymerisation of thiophene derivatives are reported. Star-shaped 3D molecules are chosen because these structures ensure a high electronic conductivity. Three-dimensional structures could also assist the conductivity. 1,3,5-tris[5-(2,2′-dithienyl)]benzene 1, tris(2,2′-dithienyl)methylcarbinol 2, tris(5(2,2′:5′2″-terthienyl)methylcarbinol 3 are synthetised by different ways. UV and IR analysis are reported along with an AFM examination of the film. The first attempt of latex particle deposition on the film is also reported showing promising results in view of surface functionalisation.     

Poly(sodium-p-styrenesulfonate) assisted microwave synthesis of ordered mesoporous carbon supported Pd nanoparticles for formic acid electro-oxidation

Pd nanoparticles highly dispersed onto the surface of ordered mesoporous carbons (OMCs) were synthesized successfully by poly(sodium-p-styrenesulfonate) (PSS) assisted microwave synthesis. Here, PSS served as a bifunctional molecule both for solubilizing and dispersing OMCs into aqueous solution and for jointing Pd²⁺ to facilitate the subsequent uniform formation of Pd nanoparticles on their surfaces. The effects of PSS on structural and electrochemical properties of Pd/OMCs were investigated. It was found that the addition of PSS facilitated Pd nanoparticles to disperse on the carbon surface. Electrochemical properties showed that Pd catalysts prepared with addition of PSS displayed better electrochemical activity and stability for formic acid electro-oxidation than those without PSS.     

Au_(core)@Pt_(shell)/GC电极上甲醇解离中间体CO氧化的SERS研究

本文采用共焦显微拉曼系统对不同介质中甲醇解离中间体CO在Aucore@Ptshell/GC电极上的氧化行为进行了研究。结果显示,不论在酸性、中性还是碱性介质中,甲醇均能在Aucore@Ptshell/GC电极上自发氧化解离出强吸附中间体CO;较低电位下,CO在酸性和中性介质中以线性吸附为主,碱性介质中则以桥式吸附为主。此研究表明,电极在中性及碱性介质中对甲醇解离中间体CO的电氧化比在酸性介质中有更好的催化活性,原位表面增强拉曼光谱技术有望拓展成为研究电催化反应的有效工具。     

Progress and prospect of anodic oxidation for the remediation of perfluoroalkyl and polyfluoroalkyl substances in water and wastewater using diamond electrodes

Although diamond electrodes are widely used in the field of electroanalysis and sensing, their application in the field of environmental engineering has yet to be fully realized. Many research studies have considered their potential application in water and wastewater treatment, where the in-situ electrochemical process can avoid the need for chemical additives by facilitating the oxidation of pollutants on the electrode surface or mediated by electrochemically synthesized oxidants in solution. Diamond-based electro-oxidation can effectively treat a number of organic micropollutants and is now being evaluated for the abatement of perfluoroalkyl and polyfluoroalkyl substances, which pose health concerns and are ubiquitous recalcitrant environmental contaminants. To move implementation of diamond-based electro-oxidation forward, the integration of modifications and codopants to yield more advanced electrode materials needs to be further developed and understood. The progress and current strategies associated with diamond electrode modifications for perfluoroalkyl and polyfluoroalkyl substances abatement as well as future considerations are discussed.     

电催化氧化制备苯甲醛的研究

在超声波槽中电生成纳米金属氧化物,继而以MnO2/Mn2 或金属氧化物氧化还原电对作为媒介,电催化氧化合成苯甲醛.实验表明,电流效率和苯甲醛的产率在超声的参与下有明显的提高,优化了超声电解的条件.在较高温度下反应时,有利于提高生成苯甲醛的电流效率.反应选择性较高,苯甲醛产率可达88.9%.     

A hybrid material based on [Mo6Br14] inorganic cluster units and [BEDO-TTF] organic monocationic radicals: Synthesis, structure and properties of (BEDO-TTF)2Mo6Br14(PhCN)4

The first charge transfer salt based on non- dimerized [BEDO-TTF]⁺ monocationic radical (BEDO-TTF=bis(ethylenedioxy)tetrathiafulvalene) associated with [Mo₆Br₁₄]²⁻ cluster anions has been synthesized by conventional electro-oxidation and characterized by single crystal X-ray diffraction, UV-VIS-NIR absorption and magnetic susceptibility measurements. (BEDO-TTF)₂Mo₆Br₁₄(PhCN)₄ crystallizes in the monoclinic system, space group P2₁/n, a=10.414(4) Å, b=21.711(7) Å, c=15.958(5) Å, β=93.65(3)°, V=3601(2) Å³, Z=2, R₁=0.0578, wR₂=0.0731. The structure of this hybrid compound is built up from a [BEDO-TTF]⁺ and PhCN (benzonitrile) organic framework in which are hosted the [Mo₆Br₁₄]²⁻ inorganic cluster units. It results in non- dimerized [BEDO-TTF]⁺ cations that exhibit a paramagnetic behavior characteristic of one unpaired electron.