Preparation of solutions of amidomagnesium chlorides in poly(ethylene oxide) and their characterization by conductivity measurements

Polymer electrolyte systems were prepared for the first time by dissolution of amidomagnesium chlorides in poly(ethylene oxide), (PEO). For the preparation, solutions of (hexamethyldisilylamido)magnesium chloride, (dimethylpyrrolyl)magnesium chloride, (diisopropylamido)magnesium chloride, piperidinomagnesium chloride and morpholinomagnesium chloride were chosen. The composition of these polymer electrolyte systems corresponds to the general formula R₂NMgCl·P(EO)_n·THF. Most work has been done with the system (hexamethyldisilylamido)magnesium chloride in PEO, (Me₃Si)₂NMgCl·P(EO)_n·THF, with n= 3, 4, 5, or 7. The electrolytes have a soft rubber-like consistency. At 30 °C, electrical conductivities of 10⁻⁶–10⁻⁵ S/cm were found. The conductivities were measured in the temperature range 20–60 °C. Within this temperature range a linear dependence of the logarithms of the conductivity on the inverse temperature was found and activation energies for the conducting process of 30–60 kJ/mol were calculated. Using those polymer electrolytes with a high content of the amidomagnesium compound, a reversible magnesium deposition takes place by cathodic reduction at potentials below −1.9 V vs. a Ag/AgCl reference electrode. These polymer electrolytes were found to be stable against oxidation up to about −0.3 V vs. Ag/AgCl. Electronic Publication     

Characterization of Carbon Film Electrodes for Electroanalysis by Electrochemical Impedance

The interfacial behavior of electrodes fabricated from carbon film resistors of 2 and 20 Ω in supporting electrolyte solutions of varying pH used in electroanalytical experiments has been characterized by electrochemical impedance spectroscopy with complementary cyclic voltammetric experiments. Equivalent circuits are proposed to fit the experimental data and the influence of electrode pretreatment has also been investigated.     

Solvation Phenomena of Potassium Thiocyanate in Methanol–Water Mixtures

This paper reports the results of a variety of experiments carried out for understanding the solvation behavior of potassium thiocyanate in methanol–water mixtures. Electrical conductivity, speed of sound, viscosity, and FT-Raman spectra of potassium thiocyanate solutions in 5 and 10% methanol–water (w/w) mixtures were measured as functions of concentration and temperature. The conductivity and structural relaxation time suggest the ion–solvent and solvent-separated ion–ion associations increase as the salt concentration increases in the mixtures. The Raman band shifts due to the C–O stretching mode of methanol for the solvent mixtures reveal the formation of methanol–water complexes. The significant changes in the Raman bands for the C–N, C–S and O–H stretching modes indicate the presence of SCN⁻−solvent interactions through the N-end, “free” SCN⁻ and the solvent-shared ion pairs as potassium thiocyanate is added to the methanol–water mixtures. The relative changes corresponding to H–O–H bending and C–O stretching frequencies indicate that K⁺ is preferentially solvated by water in these solvent mixtures. The appearance and increase of the intensity of a broad band at ≈940 cm⁻¹ upon salt addition was attributed to the SCN⁻–H₂O–K⁺ solvent-shared ion pairs. No Raman spectral evidence for K⁺(H₂O)_n species was observed. The preferential solvation of K⁺ and SCN⁻ in the methanol−water mixtures was verified by the application of the Kirkwood−Buff theory of solutions. This theory confirms that K⁺ is strongly preferentially solvated by water, whereas SCN⁻ is preferentially solvated by the methanol component.     

Crystal structure and ionic conductivity of the series A2Bi24Mo8X2O68 (A = Ca, Sr and Ba and X = Cr and W) in the Bi2O3?MoO3 system

A series of A₂Bi₂₄Mo₈X₂O₆₈ compounds, Ca₂Bi₂₄Mo₈Cr₂O₆₈ (CBMC), Sr₂Bi₂₄Mo₈Cr₂O₆₈ (SBMC), Pb₂Bi₂₄Mo₈Cr₂O₆₈ (PBMC) and Ba₂Bi₂₄Mo₈W₂O₆₈ (BBMW) have been synthesized by the solid-state method and characterized by single crystal X-ray diffraction. The compounds index into the monoclinic P2/c system with a=11.687(4) ?, 5.784(2) ?, 24.728(9) ?, 101.911(6)°, Z=1; 11.673(6) ?, 5.775(3) ?, 24.670(2) ?, 101.757(8)°, Z=1; 11.638(3) ?, 5.790(1) ?, 24.655(6) ?, 101.716(4)°, Z=1 and 11.718(6) ?, 5.818(3) ?, 24.716(12) ?, 101.835(9)°, Z=1 for CBMC, SBMC, PBMC and BBMW, respectively. The structures were solved by direct methods and refined to R indices of 0.081, 0.065, 0.080 and 0.079 respectively. These compounds are isostructural with Bi₂₆Mo₁₀O₆₉ and the structure consists of columns of [Bi₁₂O₁₄] along the b-axis, surrounded by Mo/Cr/WO₄ tetrahedra. a.c. impedance studies indicate higher values of ionic conductivity for the tungsten-substituted compounds. Supplementary material The crystal data of CBMC, SBMC, PBMC and BBMW have been deposited at the Fachinformationszentrum Karlsruhe (FIZ) with the numbers CSD 415143, CSD 415145, CSD 415144 and CSD 415142, respectively.     

Pt／钇稳定氧化锆固体电解质在高温下的电化学性质

用交流阻抗技术研究了二电极、三电极Ｐｔ／钇稳定氧化锆（简称ＹＳＺ）高温固体电化学体系．开路电位下，Ｐｔ／ＹＳＺ体系只有一个阻抗半圆，对应于电极体系的电化学活化控制过程，极化电阻随温度变化的表观活化能为１７１．５ｋＪ／ｍｏｌ．Ｐｔ／ＹＳＺ界面的双电层电容约为３００μＦ／ｃｍ２．阳极极化下，交流阻抗极化电阻显著减小；阴极极化下，极化电阻反而增大，并出现浓差控制现象．     

Protective Properties of Zinc-Rich Coatings: An Impedance Method Estimate

The impedance of zinc-rich polymer coatings on steel in a 3-% NaCl solution is studied. The electrochemical behavior of the electrode is satisfactorily described by an equivalent circuit that contains a constant-phase element, which reflects fractal properties of the zinc surface in the binder. From the results of calculations of the circuit elements for metal-rich electrodes with different zinc contents computed are fractions of the active area of the surface of the coating and its fractal dimensionality.     

触头用银合金粉末的氧化性能和氧化后的组织结构

通过热重实验和扫描电子显微等方法，研究了４种触头用银合金粉末的氧化性能及氧化后的组织结构。发现Ａｇ－Ｓｎ－ＲＥ合金粉末氧化以后，在粉末表层形成一层纯银层，其组织结构理想；它的氧化性能最好，适于制备触头材料。Ａｇ－Ｓｎ－ＲＥ合金粉末的优良氧化性能与其氧化后理想的组织结构有关。稀土元素可以降低合金粉末的氧化温度，其它影响作用有待于进一步研究。     

Electrical Properties of Polycrystalline Lithium Chloroboracite Prepared by the Sol-Gel Method

The electrical properties of polycrystalline lithium chloroboracite, Li4B7O12Cl, prepared by the sol-gel method were investigated in connection with their structure. Li4B7O12Cl pellets were prepared with different amounts of hydrochloric acid or ammonium chloride. The kind and amount of the chlorine source affected the formation of by-products (Li2B4O7, LiCl, a glass phase) and the morphology of the Li4B7O12Cl pellets. Thus their conductivity, which is dominated by grain boundary response owing to the high porosity of the materials, was also affected. The formation of Li2B4O7 as a by-product led to a higher activation energy and lower conductivity. In those pellets in which Li2B4O7 did form, an increase of the amount of glass phase led to higher conductivities.     

Label-Free Impedance Biosensors: Opportunities and Challenges

Impedance biosensors are a class of electrical biosensors that show promise for point-of-care and other applications due to low cost, ease of miniaturization, and label-free operation. Unlabeled DNA and protein targets can be detected by monitoring changes in surface impedance when a target molecule binds to an immobilized probe. The affinity capture step leads to challenges shared by all label-free affinity biosensors; these challenges are discussed along with others unique to impedance readout. Various possible mechanisms for impedance change upon target binding are discussed. We critically summarize accomplishments of past label-free impedance biosensors and identify areas for future research.     

Variable Mott-Schottky plots acquisition by potentiodynamic electrochemical impedance spectroscopy

Potentiodynamic electrochemical impedance spectroscopy provides extraction of potential-dependent space charge layer capacitance from potentiodynamic impedance spectra of non-stationary semiconductor–electrolyte interface. The new technique has been applied for acquisition of Mott-Schottky plots of cathodically treated TiO₂ anodic films. Cathodic treatment in 1 M H₂SO₄ increases donor density and flat band potential of TiO₂. Freshly doped films show hysteresis in the space charge layer capacitance in cyclic potential scans. The subsequent cycling eliminates the hysteresis but preserves the greater part of the doping effect. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, 13–16 March 2005