Investigations on the g factors of the ground and excited states for Cu2+ ions in ZnO crystal

The g factors g _// and g _⊥ of the ground Γ₆(² T ₂) and excited Γ_4,5(² E), Γ₆(² E) states for trigonal Cu²⁺ centres in ZnO crystals are calculated from three theoretical methods, the complete diagonalization (of the energy matrix) method, the second-order perturbation method (PTM-I) and the simplified second-order perturbation method (PTM-II, this method was described in an earlier paper). These methods are based on the cluster approach in which the spin-orbit coupling parameters ζ, ζ′ and the orbital reduction factors k, k′ are calculated from a semi-empirical molecular orbital method. The crystal-field parameters used in the calculations are obtained from the superposition model and so the defect structure of Cu²⁺ centres in ZnO can be acquired. The calculated g factors from the three methods are in reasonable agreement with the experimental values and the defect structure of Cu²⁺ centres in ZnO is acquired. It appears that in some cases the approximate PTM can be applied in the studies of g factors of various states. The conditions that the PTM are ineffective are discussed.     

A recursive color image edge detection method using Green's function approach

In this paper, an extended version of image edge detector using Green's function approach is proposed for detection of edges in the color vector space field. In the proposed method, the relationship between the Red, Green and Blue components is considered to design a differential operator for detection of edges in color images. By using the proposed operator, partial derivatives of all components of color image can simultaneously affect on the edge detection process. Therefore the proposed method can preserve the vector nature of color images during the edge processing stages. Also, the proposed method is compared both quantitatively and qualitatively with other color edge detectors. Experimental results show that the proposed method can efficiently preserve the edges even when the color images corrupted with different levels of noise.     

Electronic transport in LCMO/BTO composites

A series of (1 ? x)La_0.67Ca_0.33MnO₃/(x)BaTiO₃ composites has been synthesized by the solid state route. Microstructural and transport studies on these samples show a complete immiscibility between metallic ferromagnet, La_0.67Ca_0.33MnO₃ (LCMO) and insulating ferroelectric, BaTiO₃ (BTO). Temperature dependent electrical transport studies show evidence of both intrinsic and extrinsic colossal magnetoresistance (CMR) effects. Inclusion of BTO in LCMO phase results in high resistive samples with a metal-insulator transition at temperature T_{p 1} originating from intrinsic effect and another dominant metal-insulator transition at temperature T_{p 2} caused because of extrinsic effect. T_{p 2} decreases up to a certain percentage of BTO content above which this trend of variation is reversed.     

Evaluation of the mechanical properties of PMC interface using slice compression test — Analysis of transfer mechanism of interfacial shear stress

Properties of the fiber/matrix interface in SiO₂/epoxy and SiC/epoxy composite are investigated using the slice compression test (SCT) for the single fiber, where the specimen is loaded and unloaded between a plate which has different mechanical properties. It is found that the interfacial debonding proceeds from the polished surface at a soft plate side and that the fiber protrusion occurs after unloading. The fiber-protrusion length is directly measured at each applied stress level using a scanning electron microscope. Interfacial shear-sliding stress is obtained based on the constant shear-sliding stress analysis employing the obtained protrusion length. It is demonstrated that the value of interfacial shear-sliding stress shows good agreement with that obtained from another technique, the push-out test, on the same system. The relation between the fiber-protrusion length and applied stress is proportional to a certain extent. From this result, it is analytically pointed out that the applied stress has a limiting value in this SCT because of Poisson's effect. Also, two interfacial debonding criteria, which are determined analytically for the PMC, are discussed.     

A Hydrocarbon-sensitized Argon Ionization Detector for the Detection of Inorganic Compunds

Noble gas ionization detectors make it possible to determine inorganie trace components in gases. Among the several modes of operation of these detectors the hydrocarbon-sensitized argon detector is a farourable compromise with regard to the relation of the expense to the attainable detection limit. The suitability of this detector for the determination of H₂, O₂, N₂, CH₄ and CO₂, in pure gases is shown.     

Effect of hydrogen introduced by channelling implantation on the microstructures in silicon wafers

High-resolution transmission electron microscopy has been employed to study the platelet defects before annealing and the extended defects generated by annealing in the channelling-implanted silicon wafers. It has been found that there apparently appear platelet defects of quite great size and spacing at the maximum projected range of ions (R _max). Additionally, the cracks induced by annealing at 550 °C are generated around R _max instead of the average projected range of ions (R _p) as it is in the non-channelling-implanted samples. Moreover, after annealing at 1000 °C, cracks without branches and cavities arranging in a single array, different from the forked cracks and cavities arranged in several arrays in the non-channelling-implanted samples, are observed in the channelling-implanted silicon wafers. It is suggested that those special microstructure characteristics are ascribed to the channelling effect of implanted hydrogen ions.     

A numerical study on extinction behaviour of laminar micro-diffusion flames

We conducted a numerical study on the fluid dynamic, thermal and chemical structures of laminar methane–air micro flames established under quiescent atmospheric conditions. The micro flame is defined as a flame on the order of one millimetre or less established at the exit of a vertically-aligned straight tube. The numerical model consists of convective–diffusive heat and mass transport with a one-step, irreversible, exothermic reaction with selected kinetics constants validated for near-extinction analyses. Calculations conducted under the burner rim temperature 300 K and the adiabatic burner wall showed that there is the minimum burner diameter for the micro flame to exist. The Damköhler number (the ratio of the diffusive transport time to the chemical time) was used to explain why a flame with a height of less than a few hundred microns is not able to exist under the adiabatic burner wall condition. We also conducted scaling analysis to explain the difference in extinction characteristics caused by different burner wall conditions. This study also discussed the difference in governing mechanisms between micro flames and microgravity flames, both of which exhibit similar spherical flame shape.     

差分格式的余项效应分析及其应用

本文对已有的差分格的色散关系和群速度效应的Ｆｏｕｒｉｅｒ分析提出了置疑，指出症结所在并予以纠正，并且利用差分格式的Ｍｏｄｉｆｉｅｄ ＰＤＥ思想，提出了一种新的构造性差分格式分析方法－差分格式余项效应分析。这种方法基于差分格式的耗散关系和色散关系的，人有明显的构造性和现实意义。     

Edge-wave-driven durable variations in the thickness of the surfactant film and concentration of surface floats

By employing a simple model for small-scale linear edge waves propagating along a homogeneous sloping beach, we demonstrate that certain combinations of linear wave components may lead to durable changes in the thickness of the surfactant film, equivalently, in the concentration of various substances (debris, litter) floating on the water surface. Such changes are caused by high-amplitude transient elevations that resemble rogue waves and occur during dispersive focusing of wave fields with a continuous spectrum. This process can be treated as an intrinsic mechanism of production of patches in the surface layer of an otherwise homogeneous coastal environment impacted by linear edge waves.