Sensitive Method for Trace Determination of Mercury in Wines Using Electrothermal Atomic Absorption Spectrometry

An accurate, simple and precise method for total mercury determination in wines is described. Liquid/liquid extraction of inorganic and organic mercury species directly from untreated wine samples is recommended as a preconcentration procedure prior to determination by electrothermal atomic absorption spectrometry (ETAAS). Ammonium pyrrolidinedithiocarbamate was used as complexation agent. The optimal instrumental parameters for ETAAS measurement of mercury species extracted are proposed. The detection limit for total mercury determination is 0.2µgL^–1. The relative standard deviation is 15–22% for mercury in wine in the range of 0.2–5µgL^–1. The proposed procedure has been successfully applied to the determination of mercury in bottled wines in Bulgaria and Macedonia.     

On-line bi-directional electrostacking for As speciation/preconcentration using electrothermal atomic absorption spectrometry

A method using bi-directional electrostacking (BDES) in a flow system is presented for As preconcentration and speciation analysis. Some parameters such as electrostacking time and applied voltage, support buffers and their concentrations were investigated. Boric acid plus sodium hydroxide at 0.1 mol/l concentration was selected as support buffer to improve the pre-concentration factor (PF) for As(V). An analytical range from 2.0 to 50.0 μg l⁻¹, and 0.35 μg l⁻¹ as limit of detection, when applied 750 V for 20 min, were achieved. Under these conditions, a pre-concentration factor of 4.8 was obtained. The proposed method was applied to determine As(V) in mineral water and natural water samples (river, fountain and gold mine) from Ouro Preto city. Recoveries from 93.5 to 106.4% were achieved at 10 μg l⁻¹ added As level (R.S.D.s between 3 and 7%). Potassium permanganate (10 mg l⁻¹) was used for oxidising As species in order to determine total As, being established the concentration of As(III) from the difference between total As and As(V).     

Molybdenum, Mo-Ir and Mo-Ru coatings as permanent chemical modifiers for the determination of cadmium and lead in sediments and soil samples by electrothermal atomic absorption spectrometry

Molybdenum, Ir, Ru, Mo-Ir, Mo-Ru thermally coated on to platforms inserted in pyrolytic graphite tubes as permanent modifiers and Pd + Mg(NO₃)₂ conventional modifier mixture have been employed for the determination of cadmium and lead in dissolved sediments and soil samples by electrothermal atomic absorption spectrometry (ETAAS). Optimum masses and mass ratios of permanent modifiers for the analysis of Cd and Pb in sample solutions have been investigated. The 280 μg of Mo, 200 μg of Ir, 200 μg of Ru, 280 μg of Mo + 200 μg of Ir or 280 μg of Mo + 200 μg of Ru has been found as efficient as 5 μg of Pd + 3 μg of Mg(NO₃)₂ for increasing thermal stabilization of analytes and for decreasing the most serious interferences. Pyrolysis and atomization temperatures, atomization and background signal shapes, characteristic masses and detection limits of analytes in dissolved samples with or without permanent and conventional modifiers have been compared. The detection limits and characteristic masses obtained with Mo-Ir coated platform are 0.01 μg g⁻¹ and 1.1 pg for Cd and 0.09 μg g⁻¹ and 19 pg for Pb, respectively. Long-term stabilities for analytes in samples with Mo, Mo-Ir, Mo-Ru and Pd + Mg(NO₃)₂ have been studied. Cadmium and lead contents have been determined in certified and standard reference materials by using optimum conditions investigated and the results obtained with Mo-Ir or Mo-Ru were in agreement with the values of certified reference materials.     

On the determination of lead in wine by electrothermal atomic absorption spectrometry

The parameters of analytical procedures developed for direct ETAAS determination of Pb in wine are discussed. Atomic absorption spectrometers based on transversal and longitudinal Zeeman effect, wall and integrated platform atomization with two main approaches: (i) measurements in the presence of modifier and (ii) measurements without using any modifier are compared. The optimal temperature programs are defined according to the pre-treatment and atomization curves constructed in the presence of different types of wines. For all investigated instrumental systems, 1:1 dilution of wine sample with 0.2 mol L⁻¹ HNO₃ is recommended. Matrix interferences observed, call for standard addition calibration method for Pb quantification in wines. The detection limit (3σ) achieved for wine diluted in the ratio of 1:1 varied from 0.8 to 1.9 μg L⁻¹ depending on the instrument used. The relative standard deviation for the concentration range of 10 to 80 μg L⁻¹ Pb in wine is typically between 4–8%. The accuracy of the analytical procedures recommended was confirmed by comparing the results obtained with those found for wine samples previously digested with HNO₃-H₂O₂ mixture, by added/found method and by parallel analysis using different instruments. A total of 66 wine samples from different regions of Macedonia were analyzed.      

Evaluation of a cloud point extraction method for the preconcentration and quantification of silver nanoparticles in water samples by ETAAS

ABSTRACT

A simple and reliable analytical method using instrumentation available in most of the laboratories has been developed for the separation and determination of silver nanoparticles in water samples. Cloud point extraction (CPE) was used for the separation of silver nanoparticles (AgNPs) from the sample and these nanoparticles were then determined by electrothermal atomic absorption spectrometry (ETAAS). Parameters related to the cloud point extraction procedure (Triton X-114 concentration, type of complexing agent (EDTA or Na₂S₂O₃), pH, incubation temperature, incubation and centrifugation time) were selected using a multivariate approach (designs of experiments); 8.6% (v/v) Triton X-114, 750 µL saturated EDTA and pH 7 were selected as the optimum conditions. Calibration standards in a concentration range from 0 to 10 µg L^?1 of AgNPs were subjected to the CPE procedure to obtain quantitative recoveries. The LOD and LOQ were 0.04 and 0.13 µg L^?1, respectively. The method is selective for the extraction of AgNPs, and ionic Ag remains in the aqueous phase. Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) was used to evaluate the effect of the CPE procedure in particle size, and no changes were observed. Finally, the procedure was applied to wastewater samples spiked with nanoparticles with quantitative recoveries.     

利用聚四氟乙烯为化学改进剂降低电热原子吸收测定铬的基体干扰

本文研究了电热原子吸收光谱测定痕量铬时几种常见的金属离子的干扰作用。     

Electrothermal atomic absorption spectrometric method for the determination of vanadium in diesel and asphaltene prepared as detergentless microemulsions

A method based on electrothermal atomic absorption spectrometry for the determination of vanadium in diesel and asphalthene fractions is proposed. In order to avoid analyte losses observed at the microgram per liter range for metal traces in organic solutions, diesel samples were stabilized as detergentless microemulsions by mixing with propan-1-ol and nitric acid solution. The solid asphaltene oil fraction was separated and dissolved in dichloromethane before mixing these solution with propan-1-ol and nitric acid solution. Wall atomization as well as no modifier was used. For diesel, aqueous analytical solutions could be used for calibration. For asphaltene, calibration was performed with analytical solutions prepared at the dichloromethane+propan-1-ol+nitric acid medium, spiked with inorganic standard solution. Linear ranges up to 200 μg l⁻¹ were observed, as well as limit of detection of 5 μg l⁻¹ and 4 μg g⁻¹ for diesel and asphaltene, respectively. Good recoveries were obtained for V-cyclohexanebutyrates spiked diesel samples, as well as coherent results for the asphaltene fraction of the NIST 1634c (trace elements in fuel oil) certified reference material.     

Simultaneous determination of lead, nickel, tin and copper in aluminium-base alloys using slurry sampling by electrical discharge and multielement ETAAS

The simultaneous multielement determination of Pb, Sn, Ni and Cu in aluminium alloys by electrothermal atomic absorption spectrometry (ETAAS) was performed by a quick method using slurry sampling. The metallic colloidal slurries were obtained by an electrical discharge operated in liquid medium. In this work, the effects of aluminium were evaluated and the results show that it causes a strong retention of Pb, Ni and Cu at low pyrolysis temperatures which is overcome by employing high pyrolysis temperatures. Aluminium also significantly improves the thermal stabilisation of Pb and Sn, it being possible to reach pyrolysis temperatures of 1100 and 1300 °C, respectively. Such stabilisation indicates that the performance of aluminium as a matrix modifier for Pb is better than that obtained using phosphate and magnesium nitrate without substantial changes of the figures of merit. The effects of aluminium on the atomisation characteristics of the elements and those coming from the simultaneous multielement determination on the figures of merit of the elements are also discussed. In this work, a calibration procedure involving a matrix matching method with aqueous aluminium standards is proposed as a simple and efficient way to solve the inconveniences originated by the aluminium matrix. The proposed method was applied to the simultaneous multielement determination of several aluminium-base alloy standards giving results well within the recommended values.     

The use of silver nanoparticles as an effective modifier for the determination of arsenic and antimony by electrothermal atomic absorption spectrometry

Silver nanoparticles (AgNPs) were proposed as a new chemical modifier for the elimination of interferences when determining arsenic and antimony in aqueous NaCl or Na₂SO₄ solutions and in sea-water by electrothermal atomic absorption spectrometry. For this purpose, the AgNPs were prepared simply by reducing silver nitrate with sodium citrate. The effects of pyrolysis and atomization temperatures and the amounts of interferents and modifiers on the sensitivities of these elements were investigated. In the presence of the proposed modifier, a pyrolysis temperature of at least 1100 °C for arsenic and 900 °C for antimony could be applied without the loss of analytes, and the interferences were greatly reduced to allow for interference-free determination. The detection limits (N = 10, 3σ) for arsenic and antimony were 0.022 ng and 0.046 ng, respectively. AgNPs are cheaper and more available compared to many other modifiers. No background was detected, and the blank values were negligible.     

Determination of Toxic Elements in Muscle Tissues of Five Fish Species Using Ultrasound‐Assisted Pseudodigestion by Electrothermal Atomic Absorption Spectrophotometry: Optimization Study

A simple and rapid method is described for the determination of As, Cd, and Pb in muscle tissue of five freshwater fish species by ultrasound‐assisted pseudodigestion (USD). A Plackett‐Burman experimental design was used as a multivariate strategy for the evaluation of the effects of varying several variables at once. The variables such as sonication time (ST), sample mass of muscle tissues (SM), temperature of ultrasonic bath (T), nitric acid (A1), and mixture of acid and oxidant (A2) have been studied. From these studies, some variables showed significant effect on % recovery, and they were further optimized by a 2³+star central composite design, which involved 16 experiments. Optimum values of the variables were selected for the development of USD to determine the contents of As, Cd, and Pb in muscle tissue of five fish species, used as bioindicators for Lake Manchar (Sindh, Pakistan) to know whether consumption of these fishes threatens human health. The determination of three toxic elements under study was carried out by electrothermal atomic absorption spectrometry (ETAAS). The accuracy of the optimized procedure was evaluated by analysis of certified reference materials DORM‐2 (Dogfish Muscle Certified Reference Material for Trace Elements) and by comparison with conventional wet acid digestion methodology. No significant differences were observed for p=0.05 when comparing the values obtained by the proposed USD method and conventional digestion method (CDM) (paired t‐test). The average relative standard deviation of the USD method varied between 4.05%, 7.53%, and 4.55% for As, Cd, and Pb, respectively (n=10).