Monthly Increase in Vitamin D Levels upon Supplementation with 2000 IU/Day in Healthy Volunteers: Result from “Integriamoci”, a Pilot Pharmacokinetic Study

Vitamin D (VD) is a calcium- and phosphate-controlling hormone used to treat bone disorders; yet, several other effects are progressively emerging. VD deficiency is highly prevalent worldwide, with suboptimal exposure to sunlight listed among the leading causes: oral supplementation with either cholecalciferol or calcitriol is used. However, there is a scarcity of clinical studies investigating how quickly VD concentrations can increase after supplementation. In this pilot study, the commercial supplement ImmuD3 (by Erboristeria Magentina^®) was chosen as the source of VD and 2000 IU/day was administered for one month to 21 healthy volunteers that had not taken any other VD supplements in the previous 30 days. Plasma VD levels were measured through liquid chromatography coupled to tandem mass spectrometry after 7, 14, and 28 days of supplementation. We found that 95% of the participants had insufficient VD levels at baseline (<30 ng/mL; median 23.72 ng/mL; IQR 18.10–26.15), but after 28 days of supplementation, this percentage dropped to 62% (median 28.35 ng/mL; IQR 25.78–35.20). The median increase in VD level was 3.09 ng/mL (IQR 1.60–5.68) after 7 days and 8.85 ng/mL (IQR 2.85–13.97F) after 28 days. This study suggests the need for continuing VD supplementation and for measuring target level attainment.     

Dissipation Behavior and Acute Dietary Risk Assessment of Thiamethoxam and Its Metabolite Clothianidin on Spinach

Thiamethoxam and its metabolite clothianidin residues pose a potential threat to human health. This study aims to investigate the residue behavior and acute dietary risk assessment of thiamethoxam and clothianidin on spinach. Thiamethoxam and clothianidin were extracted using a quick, easy, cheap, effective, rugged, safe (QuEChERS) method and analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS). At spike levels from 0.01 to 5 mg kg⁻¹, the average recoveries of both analytes were in the range of 94.5–105.5%, with relative standard deviations (RSDs) of 3.8–10.9%. The dissipation behavior of thiamethoxam followed first-order kinetics, with half-lives of ≤1.6 days. Clothianidin appeared readily as a plant metabolite with highest level exhibited during 3 to 5 days after application. Temperature and light may be two main factors for degradation of thiamethoxam. Besides, acute risk assessment of thiamethoxam and clothianidin was evaluated with risk quotients (RQs) <100%, which suggested a low health risk for all consumer groups of Chinese residents.     

Phenolic Compound Profile by UPLC-MS/MS and Encapsulation with Chitosan of Spondias mombin L. Fruit Peel Extract from Cerrado Hotspot—Brazil

Taperebá (Spondias mombin L.) is a native species of the Brazilian Cerrado that has shown important characteristics such as a significant phenolic compound content and biological activities. The present study aimed to characterize the phenolic compound profile and antioxidant activity in taperebá peel extract, as well as microencapsulating the extract with chitosan and evaluating the stability of the microparticles. The evaluation of the profile of phenolic compounds was carried out by UPLC-MS/MS. The in vitro antioxidant activity was evaluated by DPPH and ABTS methods. The microparticles were obtained by spray drying and were submitted to a stability study under different temperatures. In general, the results showed a significant content of polyphenols and antioxidant activity. The results of UPLC-MS/MS demonstrated a significant content of polyphenols in taperebá peel, highlighting the high content of ellagic acid and quercetin compounds. There was significant retention of phenolic compounds when microencapsulated, demonstrating high retention at all evaluated temperatures. This study is the first to microencapsulate the extract of taperebá peel, in addition to identifying and quantifying some compounds in this fruit.     

Chromatographic chemical characterization of solvent refined coal I and II liquids for toxicological testing

Summary High resolution gas chromatography and gas chromatography/mass spectrometry were employed to determine the components in samples of solvent refined coal (SRC) II naphtha, middle distillate, heavy distillate, and fuel oil blend and SRC-I light oil, wash solvent, and process solvent in concentrations higher than approximately 0.5%. Quantitation was based on the addition of n-alkane internal standards and peak area response of a flame ionization detector with the use of fused silica and glass capillary columns coated with SE-52 and SF-96. The major differences in the SRC-I and II materials were the molecular weight ranges and sizes of the chemical components found in the products, an effect of the differences in the nominal boiling ranges of the materials. Alkanes, alkenes, hydroxylated aromatics, hydrogenated and polycyclic aromatic hydrocarbon ring systems, and alkylated derivatives of the above were found in greatest concentration in the unfractionated materials. Sulfur and nitrogen heteroatomic species were in greates concentration in the higher nominal boiling range materials. A major purpose of these investigations was to develop a method to obtain data on the composition of these complex sample matrices for use in designing studies for toxicological evaluation of these materials.     

Analysis of alkaloids in Macleaya cordata (Willd.) R. Br. using high-performance liquid chromatography with diode array detection and electrospray ionization mass spectrometry

A method for the analysis of alkaloids in Macleaya cordata (Willd.) R. Br. using high-performance liquid chromatography with diode array detection and electrospray ionization mass spectrometry (HPLC-DAD-ESI/MS) was developed. Using protopine (PRO), allocryptopine (ALL), sanguinarine (SA), and chelerythrine (CHE) as the model components, different columns for the separation and different mobile phases for the signal intensities of alkaloids in ESI/MS were investigated, respectively. The results showed that good separation and high signal intensities can be obtained on a high carbon loading (17%) reversed-phase C(18) column with 30 mM formic acid in mobile phase for the analysis of alkaloids. Under the optimal separation condition and UV detection (284 nm), linearity of the six alkaloids was obtained over concentration range from 0.05 to 100.00 microg/ml. The limit of detection (LOD) was 1.62, 1.87, 1.79, 1.76, 1.10, and 0.94 ng/ml for SA, CHE, PRO, ALL, dihydrosanguinarine (DHSA), and dihydrochelerythrine (DHCHE), respectively. The LODs with ESI/MS detection were lower three orders of magnitude than those obtained with UV detection. The proposed method could be used to control quality of the raw materials of the herb more comprehensively.     

HPLC-MS/MS enantioseparation of triazole fungicides using polysaccharide-based stationary phases

The enantiomeric separation of 21 triazole fungicides was carried out on four polysaccharide-derived chiral stationary phases in the reversed phase separation mode using high performance liquid chromatography coupled with tandem mass spectrometry. All fungicides were detected in electrospray ionization (ESI) positive mode with selected reaction monitoring (SRM). Complete enantioseparation was achieved for 21 fungicides except for difenoconazole based on cellulose tris (3,5-dimethylphenylcarbamate) and cellulose tris (3-chloro-4-methylphenyl carbamate) columns by optimizing experimental conditions including mobile phase and column temperature. Mobile phase was 0.1% formic acid aqueous solution mixed with methanol or acetonitrile in different proportions. Among all the fungicides, 15 with two enantiomers and three with four stereoisomers (bitertanol, bromuconazole, and cyproconazole) were successfully separated at 25°C. Enantioseparation for the other three fungicides (propiconazole, triadimenol, and difenoconazole) with four stereoisomers could be achieved by changing the column temperature from 10 to 40°C. Propiconazole and triadimenol were enantioseparated on baseline at 40 and at 35°C, respectively, and difenoconazole was enantioseparated partially with the R(s) > 1.1 at 25°C. Moreover, linearities and limits of detection (LODs) of 21 fungicides except for difenoconazole were studied, showing coefficients of determination (R(2)) higher than 0.99 and LODs lower than 2.5 μg/L.     

二异丙基酮定性定量方法的研究

采用色谱—质谱联用技术对酸—酸化反应制得的二异丙基酮化冷凝液进行了系统的定性,并且在色谱仪上利用外标法和面积归一化法对主要组分进行了定量方法的比较,得到了较好的定性定量结果。     

Quantification of Venetoclax for Therapeutic Drug Monitoring in Chinese Acute Myeloid Leukemia Patients by a Validated UPLC-MS/MS Method

Venetoclax has emerged as a breakthrough for treatment of leukemia with a wide interindividual variability in pharmacokinetics. Herein, a rapid, sensitive, and reliable UPLC-MS/MS method for quantification of venetoclax in plasma was developed and validated. The method was operated in the multiple-reaction monitoring (MRM) mode to detect venetoclax at m/z transition 868.5 > 321.0 and IS at 875.5 > 321.0, respectively. Protein precipitation prior to injection into the LC-MS/MS and the analyte was separated on an ACQUITY UPLC BEH C18 column by gradient elution with acetonitrile and 0.1% formic acid in water. Linear calibration curves were obtained in the range of 25–8000 ng/mL. The specificity, recovery, matrix effect, and stability also met the acceptance criteria of FDA guidance. The method was successfully applied to analyze plasma in acute myeloid leukemia (AML) patients. The peak plasma concentration (C_max) of venetoclax in Chinese AML patient was 2966.0 ± 1595.0 ng/mL while the trough concentration (C_min) was 1018.0 ± 729.4 ng/mL. Additionally, C_max and C_min showed a positive correlation with AST levels. Furthermore, C_max was significantly higher in the older patients. The present method can be applied for TDM of venetoclax in treatment of hematological cancers.     

Evaluation of Vetiver Volatile Compound Production under Aeroponic-Grown Conditions for the Perfume Industry

Vetiver (Chrysopogon zizanioides (L.) Roberty) is a major tropical perfume crop. Access to its essential oil (EO)-filled roots is nevertheless cumbersome and land-damaging. This study, therefore, evaluated the potential of vetiver cultivation under soilless high-pressure aeroponics (HPA) for volatile organic compound (VOC) production. The VOC accumulation in the roots was investigated by transmission electron microscopy, and the composition of these VOCs was analyzed by gas chromatography coupled with mass spectrometry (GC/MS) after sampling by headspace solid-phase microextraction (HS-SPME). The HPA-grown plants were compared to plants that had been grown in potting soil and under axenic conditions. The HPA-grown plants were stunted, demonstrating less root biomass than the plants that had been grown in potting soil. The roots were slender, thinner, more tapered, and lacked the typical vetiver fragrance. HPA cultivation massively impaired the accumulation of the less-volatile hydrocarbon and oxygenated sesquiterpenes that normally form most of the VOCs. The axenic, tissue-cultured plants followed a similar and more exacerbated trend. Ultrastructural analyses revealed that the HPA conditions altered root ontogeny, whereby the roots contained fewer EO-accumulating cells and hosted fewer and more immature intracellular EO droplets. These preliminary results allowed to conclude that HPA-cultivated vetiver suffers from altered development and root ontology disorders that prevent EO accumulation.     

Surface site dependence to negative ion formation

The processes of electron transfer and dissociative scattering are explored for collisions of hyperthermal NO⁺ on GaAs(110). The experiments reveal a marked angular dependence to O⁻ emergence. A strong correlation between the O⁻ scattering angle and the final atom-surface interaction site provides a map of the lateral dependence to reactivity. The results are modeled by sequential neutralization, dissociation, and electron attachment steps. Classical trajectory calculations, in conjunction with an empirical opacity function, accurately reproduce the experimental results. The opacity function is interpreted as the probability that an electron will attach to a departing O fragment as a function of the last surface site the atom impacts. The experiments indicate that O⁻ emergence occurs predominantly for oxygen atoms which come in close contact with the localized dangling bond states of GaAs(110).