Quantitative High Resolution Electron Microscopy

 With the resolution becoming sufficient to reveal individual atoms, HREM is now entering the stage where it can compete with X-ray methods to quantitatively determine atomic structures of materials without much prior knowledge, but with the advantage of being applicable to aperiodic objects such as crystal defects. In our view the future electron microscope will be characterised by a large versatility in experimental settings under computer control such as the illumination conditions (TEM-STEM), CBED, detecting conditions (diffraction, image, ptychography) and many other tunable parameters such as focus (g), voltage, spherical aberration (C _s ), beam tilt, etc. Since modern detectors can detect single electrons, also the counting statistics is known. The only limiting factor in the experiment will be the total number of electrons that interact with the object during the experiment due to the limitations in the exposure time or in the object damage. However, instrumental potentialities will never be exploited fully if not guided by an experimental strategy. Here intuitive guidelines can be very deceptive. For instance an image made with the best electron microscope (C _s  = 0) at the best focus (g = 0) from the best object (phase object) would show no contrast at all. Hence, questions such as what is the best C _s , focus, object thickness, etc. can only be answered properly if done using a method of experiment design.     

Study on the anodic reaction of Ni in an alkaline solution by transient pH detection based on scanning electrochemical microscopy (SECM)

The anodic reaction of Ni in an alkaline solution was studied by the tip–substrate voltammetry mode of scanning electrochemical microscopy (SECM) and cyclic voltammetry (CV). A platinum microdisc electrode was selected as the tip electrode, which functioned as a pH sensor with transient response capability. The pH value of the solution near the Ni electrode surface varied while the Ni substrate oxidation reaction occurred, and the pH variation could be detected by the tip faradic current. The cyclic voltammogram results showed that two types of hydroxides: i.e. α‐Ni(OH)₂ and β‐Ni(OH)₂ were formed during Ni oxidation in the lower potential region. In the proceedings of α‐Ni(OH)₂ → γ‐NiOOH and β‐Ni(OH)₂ → β‐NiOOH, the process of OH^? concentration decrease in the solution was ahead and behind of electron transfer in the solid phase, respectively. These results indicate that the OH^? adsorption process occurs as an elementary step in the former reaction and the H⁺ diffusion process from the inner to the outer layer of the solid phase occurs as a subsequent step in the latter reaction. The results also revealed that the oxide film on the Ni surface has a two‐layer structure. The real potential of the oxygen evolution reaction (OER) on the Ni surface with different cycles is also analyzed in the paper. Copyright © 2007 John Wiley & Sons, Ltd.     

Image analysis in the electron microscopy of cellulose protofibrils II. Digital correlation methods

Electron micrographs of parallel arrays of negatively stained ramie cellulose protofibrils were analyzed using the two-dimensional digital autocorrelation function (ACF). The method is based upon the statistical analysis of images in real space. The ACF shows strong parallel streaks of high correlation, and the lateral distance between adjacent streaks allows the mean interfibrillar distance to be estimated as 3.7 nm. The intensity profile along the streaks shows a weak modulation with peaks occurring at integral multiples of 3 or 6 nm. These results provide direct evidence that there is a regular axial texture in the protofibrils, and corroborate the conclusions previously drawn from optical diffraction analysis. Using the difference vectors found in the ACF it has been possible to reduce the picture noise level by linear integration, thereby obtaining an enhanced image. A preliminary result obtained in this way suggests that the projected protofibril morphology associated with the observed axial periodicity is a ribbon-like zigzag structure. Possible applications of the method for future work are discussed.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Progress on phthalocyanine-conjugated Ag and Au nanoparticles: Synthesis,characterization, and photo-physicochemical properties

Phthalocyanine (Pc) complexes are an important class of dyes with numerous (e.g., biological, photophysical, and analytical) applications. Among the methods used to improve the properties of these complexes, one should mention the introduction of different substituents, variation of the central metal ion, ligand exchange, and conjugation to nanomaterials (e.g., carbon-based nanomaterials and metal nanoparticles (NPs)). This work briefly reviews Pc complex conjugation to Ag and Au NPs, highlights the different NP shapes, and discusses the diversity of conjugation approaches. Moreover, the use of UV–Vis spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering and Fourier transform infrared spectroscopy to characterize Pc-NP hybrids is summarized. The effect of conjugation on Pc photo-physicochemical properties (fluorescence, singlet oxygen generation, triplet state formation, and optical limiting behavior) is discussed, and future perspectives for the synthesis and applications of new hybrids are provided.     

Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment

In this work, low pressure glow discharge O₂ plasma has been used to increase wettability in a LDPE film in order to improve adhesion properties and make it useful for technical applications. Surface energy values have been estimated using contact angle measurements for different exposure times and different test liquids. In addition, plasma-treated samples have been subjected to an aging process to determine the durability of the plasma treatment. Characterization of the surface changes due to the plasma treatment has been carried out by means of Fourier transformed infrared spectroscopy (FTIR) to determine the presence of polar species such as carbonyl, carboxyl and hydroxyl groups. In addition to this, atomic force microscopy (AFM) analysis has been used to evaluate changes in surface morphology and roughness. Furthermore, and considering the semicrystalline nature of the LDPE film, a calorimetric study using differential scanning calorimetry (DSC) has been carried out to determine changes in crystallinity and degradation temperatures induced by the plasma treatment. The results show that low pressure O₂ plasma improves wettability in LDPE films and no significant changes can be observed at longer exposure times. Nevertheless, we can observe that short exposure times to low pressure O₂ plasma promote the formation of some polar species on the exposed surface and longer exposure times cause slight abrasion on LDPE films as observed by the little increase in surface roughness.     

Molecular Basis of the Dynamic Strength of the Sialyl Lewis X—Selectin Interaction

The selectins are Ca²⁺‐dependent cell adhesion molecules that facilitate the initial attachment of leukocytes to the vascular endothelium by binding to a carbohydrate moiety as exemplified by the tetrasaccharide, sialyl Lewis X (sLeX). An important property of the selectin‐sLeX interaction is its ability to withstand the hydrodynamic force of the blood flow. Herein, we used single‐molecule dynamic force spectroscopy (DFS) to identify the molecular determinants within sLeX that give rise to the dynamic properties of the selectin/sLeX interaction. Our atomic force microscopy (AFM) measurements revealed that the unbinding of the selectin/sLeX complexes involves overcoming at least two activation barriers. The inner barrier, which determines the dynamic response of the complex at high forces, is governed by the interaction between the Fuc residue of sLeX and a Ca²⁺ ion chelated to the lectin domain of the selectin molecule, whereas the outer activation barrier can be attributed to interactions involving the sialic acid residue of sLeX. Due to their steep inner activation barriers, the selectin‐sLeX complexes are less sensitive to high pulling forces. Hence, besides its contribution to the bond energy, the Ca²⁺ ion also grants the selectin–sLeX complexes a tensile strength that is crucial for the selectin‐mediated rolling of leukocytes.     

Probing buried carbon nanotubes within polymer-nanotube composite matrices by atomic force microscopy

Multi-walled carbon nanotubes (MW-CNT) inside a polyamide-6 (PA6)-MW-CNT composite were visualized by atomic force microscopy (i) in a field-assisted intermittent contact and (ii) in the tunneling (TUNA) mode. Individual buried MW-CNTs were clearly discerned within the PA6 matrix. An average diameter of 33 ± 5 nm of the MW-CNTs was determined based on field-assisted intermittent contact mode AFM images, which is consistent with the expected size of PA6-coated MW-CNTs. Single well dispersed MW-CNTs that are located in the sub-surface region of the composite were also observed in the TUNA mode. These new AFM approaches circumvent the tedious sample preparation based on ultramicrotoming required for high resolution electron microscopy studies to obtain “in-depth” morphological information and hence are expected to facilitate the analysis of CNT-based and other nanocomposites in the future.     

Localization of Iα and Iβ phases in algal cellulose revealed by acid treatments

Highly crystalline I-rich type Cladophora cellulose, which had been kept in never-dried condition, was treated in 60wt% sulfuric acid at 100°C, for 1–48h. The cellulose microcrystals thus obtained were analysed by X-ray diffractometry, FT-IR, and transmission electron microscopy. The I component was found to be more degraded than the I component. The cellulose I/I ratios of the samples acid-treated for 0, 24, and 48 h were about 8:2, 6:4, and 4:6, respectively. After the acid treatment, the microcrystals became narrower in width, and very sharp at their ends. These results indicate that the I phase is mostly located at the surface of the microcrystals, which is morphologically more susceptible to the acid treatment.     

基于聚合物点的电致化学发光生物传感器用于葡萄糖检测

羧基功能化的聚[(9,9-二辛基芴基-2,7-二基)-co-(1,4-苯并-{2,1′,3}-噻二唑)]聚合物点(PFBT-COOH)在无外加共反应试剂的条件下具有高的电致化学发光(ECL)信号,且过氧化氢(H_2O_2)对其ECL具有高效猝灭作用。采用PFBT-COOH修饰玻碳电极,进一步交联葡萄糖氧化酶(GOD)以构建酶传感器(GOD/PFBT-COOH/GCE)。随着检测底液中葡萄糖浓度的增加,葡萄糖在GOD催化下原位产生的H_2O_2量增加,导致传感器的ECL信号逐渐减弱,从而实现葡萄糖的准确、快速、灵敏检测。此方法测得葡萄糖的线性范围为1.0×10~(-7)～3.0×10~(-3) mol/L,检出限为3.0×10~(-8) mol/L。血清样品中葡萄糖的加标回收率为98.5%～106%。该策略为酶传感器的构建提供了新思路,为葡萄糖的检测提供了新方法。