Planned positron experiments at FRM-II

The new research reactor FRM-II near Munich has a strong positron source, which delivers an intense, nearly monoenergetic positron beam. Our positron systems, the pulsed low energy positron source (PLEPS) and the scanning positron microscope (SPM) will be operated at this beam. Some aspects of matching these systems to the new positron source will be discussed.Considerable improvements are expected, e.g. more than 10⁵ s⁻¹ recorded events at PLEPS and sub-micrometre resolution at SPM. They will enable investigations in so far inaccessible problems like the evaluation of annihilation characteristics and trapping constants of individual defects or studies of fast dynamical processes. In applied materials science complex defect structures will be studied which demand a resolution into many differing lifetimes, e.g. fractured specimens, wear, corrosion, etc. Also large series of measurements at small systematic modifications are planned. There is also the opportunity to analyse in addition the chemical microstructure of the specimens by means of a hydrogen microprobe and other ion beam techniques available close to FRM-II at the Technical University of Munich.     

LIMITING BEHAVIOR OF UNIFORM RECURSIVE TREES

The authors consider the limiting behavior of various branches in a uniform recursive tree with size growing to infinity.The limiting distribution ofζ_(n,m),the number of branches with size m in a uniform recursive tree of order n,converges weakly to a Poisson distribution with parameter 1/m with convergence of all moments.The size of any large branch tends to infinity almost surely.     

Infinite-order phase transition in a classical spin system

For an exactly soluble classical spin model with long-range inhomogeneous coupling it is proved that in the absence of external magnetic field the free energy is aC function of the temperature at the critical point.     

聚丙烯基纳米碳纤维复合材料结晶行为研究

采用示差扫描量热法(DSC)研究了纳米碳纤维对PP／CNF复合材料中PP结晶行为的影响。结果表明：纳米碳纤雏可提高PP的结晶温度，但略降低其结晶速率和结晶度。提高纳米碳纤雏含量或减小纳米碳纤雏直径，PP结晶行为的上述变化更为明显，但结晶速率随纳米碳纤维含量出现先减小后增大的趋势。     

Macroporous poly(methyl methacrylate) produced by phase separation during polymerisation in solution

Polymethyl methacrylate (PMMA) sponges were obtained by polymerization in a solution with monomer/ethanol ratios up to 20:80. The material obtained after the elimination of the solvent present a homogeneous distribution of dispersed pores up to a monomer/ethanol ratio lower than 40:60. For higher ethanol contents in the reacting mixture, the morphology of the sponge corresponds to a network of PMMA microparticles, leaving large empty spaces leading to highly porous structure. The monomer/ethanol ratio during polymerization has a large influence on the porosity, thermal, and mechanical properties of the material and, for large solvent contents, on the size of the polymer microparticles.     

Electrochiroptical systems based on biphenyl-2,2′-diyl-type dicationic dyes: strong chiroptical signals through the transmission of point chirality to axial chirality

Huge CD amplitude (A = +538) was attained by diastereomeric preference (50% de) for the title dication with two bis[4-(R)-sec-butoxyphenyl]methylium units in benzene at 23 °C. Intramolecular π-π stacking is the origin for effective transmission of point chirality to axial chirality to attain the chiroptical enhancement of 400-times. Thanks to the strong CD signaling, chiroptical changes upon electrolysis could be readily detected, thus realizing a new class of electrochiroptical response systems. Chiroptical properties could also be modified by solvent polarity.     

快速响应的温敏性聚(N-异丙基丙烯酰胺)水凝胶 Ⅰ.以CaCO_3为成孔剂制备方法、表征及动力学研究

以不同粒径的CaCO3粒子为成孔剂 ,合成了快速响应的温敏性聚 (N 异丙基丙烯酰胺 ) (PNIPA)水凝胶 .利用扫描电镜观察到水凝胶具有特殊的孔状结构 ,得到水凝胶的孔径大小为几十微米左右 .动力学研究表明 ,该水凝胶在温敏膨胀或收缩时 ,具有快速的响应速率 ,在 10min内的失水率可达 90 % .比较了干凝胶和4 0℃下失水后的凝胶两种不同状态下水凝胶的膨胀曲线 ,发现两者的溶胀动力学曲线明显不同 ,前者的曲线有拐点 .同时发现与失水收缩速率相比 ,水凝胶具有较慢的吸水膨胀速率 .     

芳香族热致液晶聚（对羟基苯甲酸－对苯二甲酸双酚A酯）的流变性能

用Ｉｎｓｔｒｏｎ３２１１型毛细管流变仪研究了以对羟基苯甲酸（ＰＨＢ）、对苯二甲酸（ＴＰＡ）和双酚Ａ（ＢＰＡ）为单体合成的共聚芳酯液晶熔体的流变性能。结果表明，切变速率、熔体温度及ＰＨＢ链节含量对切粘度和结构粘度有很大的影响。切变速率在１０～１０３／Ｓ、温度２９５～３３０℃范围内，共聚酯粘流活化能△Ｅη为７４．５～２０５．１（ｋＪ／ｍｏｌ）。液晶熔体在剪切流中存在屈服应力τｏ，随温度升高τｏ值降低。在低温、低切变速率下，共聚酯熔体的弹性很小，甚至呈现挤出收缩现象。